11. ETFA 2006: Prague, Czech Republic
Proceedings of 11th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA 2006, September 20-22, 2006, Diplomat Hotel Prague, Czech Republic. IEEE 2006- Patrick Meumeu Yomsi, Yves Sorel: Non-Schedulability Conditions for Off-line Scheduling of Real-Time Systems Subject to Precedence and Strict Periodicity Constraints.
- Karim Traore, Emmanuel Grolleau, Ahmed Rahni, Michaël Richard: Response-Time Analysis of tasks with offsets.
- Marco Antolovic, Kristen Acton, Naveen Kalappa, Siddharth Mantri, Jonathan Parrott, Jonathan E. Luntz, James R. Moyne, Dawn M. Tilbury: PLC Communication using PROFINET: Experimental Results and Analysis.
- Luciana Rech, Carlos Montez, Rômulo Silva de Oliveira: A Clone-Pair Approach for the Determination of the Itinerary of Imprecise Mobile Agents with Firm Deadlines. 9-15
- Paulo S. Motta Pires, Ivano Miranda dos Anjos: Improvements on Ethernet LAN Network Infrastructure for Industrial Automation: a Case Study. 16-22
- Yuxin Su, Chunhong Zheng, Peter C. Müller: A Simple Linear Velocity Estimator for High-Precision Motion Control. 23-29
- Tarik Khoutaif, Guy Juanole: Formal modelling and evaluation of the data transfer phase of the ACL links on the WPAN Bluetooth. 30-37
- Ricardo Moraes, Paulo Portugal, Francisco Vasques: A Stochastic Petri Net Model for the Simulation Analysis of the IEEE 802.11e EDCA Communication Protocol. 38-45
- Paulo Bartolomeu, José Alberto Fonseca, Paulo Maria Rodrigues, Luís Miguel Girão: Evaluating the Timeliness of Bluetooth ACL Connections for the Wireless Transmission of MIDI. 46-53
- Urban Bilstrup, Katrin Bilstrup, Bertil Svensson, Per-Arne Wiberg: Using Dual-Radio Nodes to Enable Quality of Service in a Clustered Wireless Mesh Network. 54-61
- Jean-Luc Béchennec, Mikaël Briday, Sébastien Faucou, Yvon Trinquet: Trampoline An Open Source Implementation of the OSEK/VDX RTOS Specification. 62-69
- Sven Gestegard Robertz, Dan Henriksson, Anton Cervin: Memory-Aware Feedback Scheduling of Control Tasks. 70-77
- Martin Skambraks: An Architecture for Runtime State Restoration after Transient Hardware-Faults in Redundant Real-Time Systems. 78-85
- Beng Siong Lim, Geok Hong Phua, Leck Leng Aw, Zhongqiang Ding, Hao Zeng, Hao He: Multi-sensor electrode setup verification and diagnostics system for EDM Operation. 94-101
- Ondrej Spinka, Jan Krakora, Michal Sojka, Zdenek Hanzálek: Los-Cost Avionics System for Ultra-Light Aircrafts. 102-109
- Jit Biswas, Victor Foo Siang Fook, Qiang Qiu, Maniyeri Jayachandran, Aung Aung Phyo Wai, Viet Thang Pham, That Mon Htwe: Data Collection and Feature Extraction for a Smart Ward Application. 110-115
- Seth Yang En Tan, Eng Soon Loh, Toon Tien Foo, Woon Shin Chong, Chum Mok Puah, Beng Siong Lim: A micro-fluidic level sensing and dispensing system for large-scale stem cell experimentations. 116-123
- Hugo Marcondes, Arliones Stevert Hoeller, Lucas Francisco Wanner, Antônio Augusto Fröhlich: Operating Systems Portability: 8 bits and beyond. 124-130
- Manuel G. Gericota, Luís F. Lemos, Gustavo R. Alves, Mario M. Barbosa, José M. Ferreira: A Framework for Fault Tolerant Real Time Systems Based on Reconfigurable FPGAs. 131-138
- Frederico Santos, J. Trovao, A. Marques, Paulo Pedreiras, Joaquim Ferreira, Luís Almeida, M. Santos: A Modular Control Architecture for a Small Electric Vehicle. 139-144
- Marcos Vinicius Linhares, Alexandre Jose da Silva, Rômulo Silva de Oliveira: Empirical Evaluation of SysML through the Modeling of an Industrial Automation Unit. 145-152
- Antti Pakonen, Teppo Pirttioja, Ilkka Seilonen, Teemu Tommila: Proactive Computing in Process Monitoring: Information Agents for Operator Support. 153-158
- Reiner F. Perozzo, Carlos Eduardo Pereira: Framework for Building Supervisory Systems in Mobile Devices. 167-172
- Virgilio Gilart-Iglesias, Francisco Maciá Pérez, Francisco José Mora-Gimeno, José Vicente Berná-Martínez: Normalization of Industrial Machinery with Embedded Devices and SOA. 173-180
- Salvatore Cavalieri: Outdoor Localisation in a Wireless LAN. 181-188
- Mogens Mathiesen, R. Indergaard, H. Vefling, Niels D. Aakvaag: Trial Implementation of a Wireless Human Machine Interface to Field Devices. 189-193
- William D. Henderson, Steven Tron: Verification of The Minimum Cost Forwarding Protocol for Wireless Sensor Networks. 194-201
- Ricardo Moraes, Paulo Portugal, Francisco Vasques: Simulation Analysis of the IEEE 802.11e EDCA Protocol for an Industrially-Relevant Real-Time Communication Scenario. 202-209
- HyungTae Kim, HaeJeong Yang, SungChul Kim: Nano Control Algorithm for Grinding and Polishing Aspherical Surface. 210-216
- Mourad Ahmane, Laurent Truffet: State Feedback Control via Positive Invariance for Max-plus Linear Systems using *-algorithm. 217-224
- Agnelo Denis Vieira, José Eduardo Ribeiro Cury, Max Hering de Queiroz: A Model for PLC Implementation of Supervisory Control of Discrete Event Systems. 225-232
- Carlos Andrés, Pedro Gomez, José Pedro García-Sabater: Comparing dispatching rules in dynamic hybrid flow shops. 233-239
- Tay Jin Chua, F. Y. Wang, Tian Xiang Cai, Xiao-Feng Yin: A Heuristics-based Advanced Planning and Scheduling System with Bottleneck Scheduling Algorithm. 240-247
- Hiroshi Yajima, Shinichi Matsumoto, Ryôichi Sasaki: Proposal of Risk Communications Supporting Method in Multiplex Risk Communicator. 255-260
- Horst F. Wedde, Sanjeev K. Taneja, Sebastian Lehnhoff, Michael ten Hompel, D. Liekenbrock, Sergey Libert: Distributed Integrated Scheduling in Automated Manufacturing Systems with Transient Machine Failures. 261-269
- Jackson Francomme, Gilles Mercier, Thierry Val: A simple method for guaranteed deadline of periodic messages in 802.15.4 cluster cells for control automation applications. 270-277
- Mario Neugebauer, Joern Ploennigs, Klaus Kabitzsch: Analysis of Duty Cycle Adaptation in Wireless Sensor Networks. 278-285
- R. Morales-Ramos, Juan A. Montiel-Nelson, H. Milosiu, Roc Berenguer, Andrés Garcia-Alonso: Adjustable Voltage Sensors for Power Supply Chains in Passive UHF RFID Transponders. 286-291
- Mihai Marin-Perianu, T. J. Hofmeijer, Paul J. M. Havinga: Implementing Business Rules on Sensor Nodes. 292-299
- Manuel Díaz, Daniel Garrido, Luis Llopis, Bartolomé Rubio, José M. Troya: A Component Framework for Wireless Sensor and Actor Networks. 300-307
- Mingqing Hu, Andrea Boni: An Improved Reduced Set Method to Control the Run-time Complexity of SVM in Wireless Sensor Networks. 308-313
- Carsten Buschmann, Dennis Pfisterer, Stefan Fischer: Estimating Distances Using Neighborhood Intersection. 314-321
- Alberto Elia, Luca Ferrarini, Carlo Veber: Analysis of Ethernet-based safe automation networks according to IEC 61508. 333-340
- Bradley Triden, Siddharth Mantri, Kyle Schroeder, Aditya Thomas, James R. Moyne, Dawn M. Tilbury: Dedicated vs. Shared Networks for Safety and Controls: An analysis of the trade-offs involved. 341-347
- José Rufino, Paulo Veríssimo, Carlos Almeida, Guilherme Arroz: Integrating Inaccessibility Control and Timer Management in CANELy. 348-355
- Dirk Missal, Hans-Michael Hanisch: Synthesis of Distributed Controllers by Means of a Monolithic Approach. 356-363
- Jeffrey Ashley, Lawrence E. Holloway: Exploiting causal structure in the refined diagnosis of condition systems. 364-371
- Jürgen Greifeneder, Georg Frey: Optimizing Quality of Control in Networked Automation Systems using Probabilistic Models. 372-379
- Gaëlle Marsal, Bruno Denis, Jean-Marc Faure, Georg Frey: Evaluation of Response Time in Ethernet-based Automation Systems. 380-387
- Carlos C. Insaurralde, Miguel A. Seminario, Juan F. Jiménez, Jose M. Giron-Sierra: IEC 61499 Model for Avionics Distributed Fuel Systems with Networked Embedded Holonic Controllers. 388-396
- Liliana Cucu, Joël Goossens: Feasibility Intervals for Fixed-Priority Real-Time Scheduling on Uniform Multiprocessors. 397-404
- Lamine Bougueroua, Hui Xue Zhao, Laurent George, Serge Midonnet: Execution Overrun Management for Fixed-Priority Preemptive Scheduling of Sporadic Graph Tasks. 413-420
- Dimitar Kazakov, Iain Bate: Towards New Methods for Developing Real-Time Systems: Automatically Deriving Loop Bounds Using Machine Learning. 421-428
- Paolo Ferrari, Alessandra Flammini, Daniele Marioli, Andrea Taroni, Francesco Venturini: Experimental analysis to estimate jitter in PROFINET IO Class 1 networks. 429-432
- Margaret Naughton, Donal Heffernan, Gabriel Leen: Use of Timed Automata Models in the Design of Real-time Control Network Elements. 433-436
- Iacopo Carreras, Daniele Miorandi, Stefano Vitturi: Performance of an Application Layer Protocol for Wireless Industrial Communications. 441-444
- Stefan Knauth, Daniel Käslin, Rolf Kistler, Alexander Klapproth: UPnP Compression for IP based Field Devices in Building Automation. 445-448
- Lucia Lo Bello, Giordano A. Kaczynski, Thomas Nolte: Towards a robust real-time wireless link in a land monitoring application. 449-452
- Giordano A. Kaczynski, Lucia Lo Bello, Thomas Nolte: Towards stochastic response-time of hierarchically scheduled real-time tasks. 453-456
- Georg Neugschwandtner: Towards Plug and Play in Home and Building Automation Networks. 461-464
- S. Ishida, C. Roesener, H. Nishi, J. Ichimura: Discussion of Aspects in Energy Management with Demand Response System KNIVES. 465-468
- Enrico S. Canuto, Fabio Musso: Embedded Model Control: Application to Web Winding. Part I: Modelling. 477-484
- Enrico S. Canuto, Fabio Musso: Embedded Model Control: Application to Web Winding. Part II: Digital Control. 485-492
- Enrico S. Canuto, Fabio Musso: Embedded Model Control: Application to Interferometric Metrology Lines. 493-500
- Sameh Refaat, Jacques M. Hervé, Saeid Nahavandi, Hieu Minh Trinh: High-Precision Five-Axis Machine for High-Speed Material Processing Using Linear Motors and Parallel-Serial Kinematics. 501-506
- Andrew Kusiak: Innovation Science. 507-514
- Braulio Jose Alvarez, Pedro Fernández, S. Mateos, Jose Carlos Rico, C. M. Suarez: Accessibility Analysis for Automatic Inspection Using Bounding Volume Hierarchies. 515-522
- Pedro Fernández, Braulio Jose Alvarez, Jose Carlos Rico, David Blanco Fernandez, Gonzalo Valiño: Constraints Evaluation and Working Methodology for Laser Scanning of Free-Form Surfaces. 523-530
- Ana Antunes, Fernando Morgado Dias, José Vieira, Alexandre Mota: Delay Compensator: an Approach to Reduce the Variable Sampling to Actuation Delay Effect in Distributed Real-time Control Systems. 531-536
- Omar J. López Orozco, Jose L. Martinez Lastra: Adding Function Blocks of IEC 61499 Semantic Description to Automation Objects. 537-544
- Luca Ferrarini, Carlo Veber, Arndt Lüder, Jörn Peschke, Athanasios P. Kalogeras, John V. Gialelis, J. Rode, D. Wunsch, V. Chapurlat: Control Architecture for Reconfigurable Manufacturing Systems: the PABADIS'PROMISE approach. 545-552
- Ryosuke Saga, Naoto Okada, Hiroshi Tsuji: Three Layered Business Process Architecture for Workflow Cooperation. 553-558
- C. D'Onofrio, M. Bruccoleri, U. La Commare: Integrating Manufacturing Equipments Using a Shop Floor Control System. 559-566
- Toshiya Kaihara, Susumu Fujii: A Study on Multi-Agent based Resource Allocation Mechanism for Automated Enterprise Contracting. 567-573
- John V. Gialelis, Athanasios P. Kalogeras, A. Kaklis, Stavros A. Koubias: Collaborative Continuous Replenishment Planning Process Implementation Utilizing Web Services, Product Ontologies and Workflow Management Systems. 574-581
- Lucas Francisco Wanner, Arliones Stevert Hoeller, Augusto Born de Oliveira, Antônio Augusto Fröhlich: Operating System Support for Data Acquisition in Sensor Networks. 582-585
- Christos D. Antonopoulos, Antonis Athanasopoulos, Stavros A. Koubias: A simulation study on dropping tendencies of an ad-hoc wireless network. 586-589
- Julio Barbancho, Carlos León, Francisco Javier Molina, Antonio Barbancho: Giving neurons to sensors. QoS management in wireless sensors networks. 594-597
- Lucia Lo Bello, Orazio Mirabella: Efficient Full Duplex Links for Long Distance Wireless Mesh Networks. 598-601
- Carlos De Marziani, Jesús Ureña, Manuel Mazo, Álvaro Hernández, Juan Jesús García, Ana Jiménez, María del Carmen Pérez, A. Ochoa, Jose M. Villadangos: Relative Positioning System Using Simultaneous Round Trip Time of Flight Measurements. 602-605
- Kai T. Hansen: Process Plant Reference Model for Communication. 606-610
- Danillo Moura Santos, Roberto de Matos, Antônio Augusto Fröhlich, Rafael Luiz Cancian: Application-Oriented System Design as an Embedded Systems Development Strategy: a critical analysis. 615-618
- Roman Bartosinski, Zdenek Hanzálek, Libor Waszniowski, Petr Struzka: Processor Expert Enhances Matlab Simulink Facilities for Embedded Software Rapid Development. 625-628
- Ralf Salomon, Matthias Schneider, Daniel Wehden: Low-Cost Optical Indoor Localization System for Mobile Objects without Image Processing. 629-632
- Valeriy Vyatkin, Martin Hirsch, Hans-Michael Hanisch: Systematic Design and Implementation of Distributed Controllers in Industrial Automation. 633-640
- Andrei Lobov, Corina Popescu, Jose L. Martinez Lastra: An Algorithm for Siemens STL representation in TNCES. 641-647
- Hao He, Anton J. R. Aendenroomer, Beng Siong Lim: Diner-Waiter Pattern for Time Critical Services. 648-654
- Jason J. Scarlett, Robert W. Brennan: Re-evaluating Event-Triggered and Time-Triggered Systems. 655-661
- Belynda Brahimi, Christophe Aubrun, Eric Rondeau: Modelling and Simulation of Scheduling Policies Implemented in Ethernet Switch by Using Coloured Petri Nets. 667-674
- Alexandre Seuret, M. Termens-Ballester, A. Toguyeni, S. El Khattabi, Jean-Pierre Richard: Implementation of an Internet-controlled system under variable delays. 675-680
- Shanbin Li, Dominique Sauter, Christophe Aubrun: Robust Fault Isolation Filter Design for Networked Control Systems. 681-688
- Supat Klinkhieo, Chandra Kambhampati, Ronald J. Patton: Information Packets and MPC Enable Fault-tolerance in Network Control. 689-694
- Alessandro Casavola, Giuseppe Franzè, Michela Sorbara: Fault Tolerance Aspects in Networked Multi-area Power Systems. 695-702
- Jonathan M. Aitken, Tim Clarke: Using Data Confluences in a Distributed Network with Social Monitoring to Identify Fault Conditions. 703-710
- Oscar Barambones, Aitor J. Garrido, Francisco Javier Maseda, Patxi Alkorta: Speed Sensorless Vector Control of Induction Motors Based on Robust Adaptive Variable Structure Control Law. 711-718
- N. Antequera, Matilde Santos, Jesús Manuel de la Cruz: A Helicopter Control based on Eigenstructure Assignment. 719-724
- Fotis N. Koumboulis, Maria P. Tzamtzi, Michael G. Skarpetis: Finite Precision Controllers for Robust Pole Assignment of Linear Systems with Nonlinear Uncertain Structure. 725-732
- Fotis N. Koumboulis, George E. Panagiotakis: Disturbance Rejection of General Linear Neutral Time Delay Systems, via Measurement Output Feedback. 733-742
- Mika Strömman, Seppo Sierla, Jukka Peltola, Kari Koskinen: Professional designers' adaptations of IEC 61499 to their individual work practices. 743-749
- Arastoo Barji, Nils H. Hagge, Bernardo Wagner: Comparative Study of Using CNet, IEC 61499, and Statecharts for Behavioral Models of Real-time Control Applications. 750-757
- Kleanthis Thramboulidis, Giannis V. Koumoutsos, George S. Doukas: Towards a Service-Oriented IEC 61499 compliant Engineering Support Environment. 758-765
- Seno Panjaitan, Georg Frey: Combination of UML Modeling and the IEC 61499 Function Block Concept for the Development of Distributed Automation Systems. 766-773
- Victor Dubinin, Valeriy Vyatkin, Hans-Michael Hanisch: Modelling and Verification of IEC 61499 Applications using Prolog. 774-781
- Goran Cengic, Oscar Ljungkrantz, Knut Åkesson: A Framework for Component Based Distributed Control Software Development Using IEC 61499. 782-789
- A. Garcia, A. Cenjor, Y. Chang, M. de la Fuente: An Agent-Oriented Design Methodology for RFID Improved Manufacturing Control. 790-796
- Nancy Ruiz, Adriana Giret, Vicente J. Botti: Towards an Agent-based Simulation Tool for Manufacturing Systems. 797-804
- Yusuke Morihiro, Toshiyuki Miyamoto, Sadatoshi Kumagai: An Initial Task Assignment Method for Autonomous Distributed Vehicle Systems with Finite Buffer Capacity. 805-812
- Wojciech Muszynski, Zbigniew A. Banaszak, Izabela Tomczuk-Pirog: Automated Vehicles' Work Planning in Flexible Manufacturing Systems. 813-818
- Paulo Leitão, Armando W. Colombo: Petri net based Methodology for the Development of Collaborative Production Systems. 819-826
- Martin Saska, Martin Macas, Libor Preucil, Lenka Lhotská: Robot Path Planning using Particle Swarm Optimization of Ferguson Splines. 833-839
- Naoki Uchiyama, Shoji Takagi, Shigenori Sano, Kazuo Yamazaki: Robust Contouring Control for Multi-Axis Feed Drive Systems. 840-845
- P. A. Fernandes Ferreira, João Rogério Caldas Pinto: Visual Based Predictive Control for a Six Degrees of Freedom Robot. 846-853
- Yolanda Bolea, Antoni Grau, Juan Gamiz-Caro: LPV Gain-Scheduled PID for Distributed Motion Control via Ethernet. 854-861
- Ramon Vilanova: Revisiting IMC based design of PI/PID controllers for FOPTD Models. 862-869
- Juan J. Gude, Evaristo Kahoraho, Josu Etxaniz: Practical aspects of PID controllers: An industrial experience. 870-878
- Fragiskos A. Batzias: Rotary Cement Kiln Control for Reducing NOx Emissions to Atmosphere. 879-886
- Philipp Peti, Roman Obermaisser, Harald Paulitsch: Investigating Connector Faults in the Time-Triggered Architecture. 887-896
- Eric Armengaud, Andreas Steininger, Martin Horauer: Automatic Parameter Identi cation in FlexRay based Automotive Communication Networks. 897-904
- Thomas Nolte, Hans A. Hansson, Lucia Lo Bello: Integration of networked subsystems in a resource constrained environment. 905-912
- Neil C. Audsley, R. Gao, Ameet Patil: Towards a File System Interface for Mobile Resources in Networked Embedded Systems. 913-920
- Henning Trsek, Jürgen Jasperneite, Sugun Pradeep Karanam: A Simulation Case Study of the new IEEE 802.11e HCCA mechanism in Industrial Wireless Networks. 921-928
- Eduardo De Freitas Rocha Loures, Marco Antonio Busetti de Paula, Jean-Claude Pascal: Maintenance integration in a control-monitoring architecture based on Petri net with objects. Application to a flexible manufacturing system. 929-936
- Izabela Tomczuk-Pirog, Robert Wójcik, Zbigniew A. Banaszak: Decision Support Systems Based on CLP Approach in SMEs. 937-942
- Oliver Rose: Implementation of a Simulation-Based Optimizer for Semiconductor Wafer Factories. 943-949
- Patrícia N. Pena, José E. R. Cury, Stéphane Lafortune: New Results on Testing Modularity of Local Supervisors using Abstractions. 950-956
- José Jaime Ruz, Orlando Arevalo, Jesús Manuel de la Cruz, Gonzalo Pajares: Using MILP for UAVs Trajectory Optimization under Radar Detection Risk. 957-960
- Vasileios Deligiannis, Stamatis Manesis: Automata Based Modeling for Batching and Mixing Plants for Concrete. 961-964
- Nagore Iriondo, Marga Marcos, Elisabet Estevez, Dario Orive: Implementing Non-Linear Strategies for PID in IEC 61131-3 ST Language. 969-972
- Anila Mjeda, Brendan Jackman, Gabriel Leen: A proposed framework for fine-tuning/training a fuzzy controller. 973-976
- A. Ochoa, Jesús Ureña, Álvaro Hernández, Manuel Mazo, Carlos De Marziani, María del Carmen Pérez: Processing Algorithm for obtaining the Impulse Response in a MIMO Ultrasonic System. 977-980
- E. Emanuel Almeida, Jonathan E. Luntz, Dawn M. Tilbury: Reconfigurable Logic Control Using IEC 61499 Function Blocks. 981-984
- Vinicius Menezes de Oliveira, Walter Fetter Lages: MPC Applied to Motion Control of an Underactuated Brachiation Robot. 985-988
- Kleanthis Thramboulidis, Nikolaos Papakonstantinou: An IEC61499 Execution Environment for an aJile-based Field Device. 989-992
- Maria P. Tzamtzi, Fotis N. Koumboulis: Towards Squeezing Forces Control for Cooperating Manipulators. 993-996
- Ioan Filip, Octavian Prostean, Iosif Szeidert, Cristian Vasar, Gabriela Prostean: Self-tuning Control Using External Integrator Loop for a Synchronous Generator Excitation System. 997-1000
- Luis Rubio, Manuel de la Sen, Asier Ibeas: Discrete-time Model Reference Control of Milling Forces under Fractional Order Holds. Part I: Known Plant. 1001-1004
- Luis Rubio, Manuel de la Sen, Asier Ibeas: Discrete-Time Model Reference Control of Milling Forces under Fractional Order Holds. Part II: Extensions to Adaptive Control. 1005-1008
- Diego Marcos-Jorquera, Francisco Maciá Pérez, Virgilio Gilart-Iglesias, Alfonso Capella-D'Alton: Fault Tolerance for Manufacturing Components. 1013-1016
- Pedro F. Santana, Vasco Santos, José Barata: DSAAR: A Distributed Software Architecture for Autonomous Robots. 1017-1020
- Hyeyeon Chang, JongSuk Choi, Munsang Kim: Experimental research of probabilistic localization of service robots using range image data and indoor GPS system. 1021-1027
- Leopoldo Armesto, Josep Tornero, L. Domenech: Improving Self-Localisation of Mobile Robots Based on Asynchronous Monte-Carlo Localization Method. 1028-1035
- Jorge Costa, Filipe Dias, Rui Araújo: Simultaneous Localization and Map Building by Integrating a Cache of Features. 1036-1043
- Jorge Pomares, Pablo Gil, Gabriel J. García, Fernando Torres: Visual - Force Control and Structured Light Fusion to Improve Recognition of Discontinuities in Surfaces. 1044-1050
- Jian Li, Yeqiong Song: Relaxed (m, k)-firm Constraint to Improve Real-time Streams Admission Rate under Non Pre-emptive Fixed Priority Scheduling. 1051-1060
- Naveen Kalappa, Kristen Acton, Marco Antolovic, Siddharth Mantri, Jonathan Parrott, Jonathan E. Luntz, James R. Moyne, Dawn M. Tilbury: Experimental Determination of Real Time Peer to Peer Communication Characteristics of EtherNet/IP. 1061-1064
- Paulo Sousa, Luis Lino Ferreira, Mário Alves: Repeater vs. Bridge-Based Hybrid Wired/Wireless PROFIBUS Networks: a Comparative Performance Analysis. 1065-1072
- Lucia Lo Bello, Giordano A. Kaczynski, Francesco Sgro, Orazio Mirabella: A wireless traffic smoother for soft real-time communications over IEEE 802.11 industrial networks. 1073-1079
- Ewa Figielska: Combining an Optimizing Method with a Genetic Algorithm to Solve a Flowshop Scheduling Problem with Additional Resources. 1080-1086
- Takashi Onoyama, Takuya Maekawa, Sen Kubota, Norihisa Komoda: GA Applied VRP Solving method for a Cooperative Logistics Network. 1101-1106
- George Goulas, V. Barkayannis, S. Gianoulis, Christos Gogos, Panayiotis Alefragis, P. Foundas, Christos Valouxis, Stavros A. Koubias, Efthymios Housos: ERMIS: A Helicopter Taxi Company Software Support System based on GPS, GSM and Web Services. 1107-1114
- Ryo Imura: The Role of Networked RFID for Driving the Ubiquitous. 1115-1118
- Peter Jones: Networked RFID for use in the Food Chain. 1119-1124
- Anikó Costa, Luís Gomes: Partitioning of Petri net models amenable for Distributed Execution. 1129-1132
- Christoph Sünder, Bernard Favre-Bulle, Valeriy Vyatkin: Towards an Approach for the Verification of Downtimeless System Evolution. 1133-1136
- Seok-Won Lee: An Approach to Swept Volume Generation for NC Machining using Gauss Map. 1137-1140
- María del Carmen Pérez, Álvaro Hernández, Jesús Ureña, Carlos De Marziani, Ana Jiménez: FPGA-based Implementation of a Correlator for Kasami Sequences. 1141-1144
- Marek Obitko, Vladimír Marík: Integration of Multi-Agent Systems: Architectural Considerations. 1145-1148
- Juan Jesús García, Jesús Ureña, Manuel Mazo, Cristina Losada, Álvaro Hernández, Carlos De Marziani, Fernando J. Álvarez: Data Integration by considering spatial diversity in an IR barrier. 1149-1152
- Fernando Valdés, Felipe Espinosa, AbdelBaset M. H. Awawdeh, Julio Pastor: Routes for Splitting and Merging Maneuvers of Platoon Followers in Urban Environments. 1153-1156
- Vera Larionova, Svetlana Larionova: Development of Hard-Realtime Control Software for Critical Industrial Automation Tasks using Graphical System POLYGON. 1161-1164
- Uwe Schmidtmann, Gerd von Cölln, Gerhard Kreutz, Jörg Thomaschewski, Rainer Koers, Bodo Wenker: Specification of Holistic Mechatronic Objects Based on Semantic Web Technology. 1165-1168
- Daniel Lecking, Oliver Wulf, Bernardo Wagner: Variable Pallet Pick-Up for Automatic Guided Vehicles in Industrial Environments. 1169-1174
- Hiroaki Seki, Yoshitsugu Kamiya, Masatoshi Hikizu: SCARA Type Robot Arm with Mechanically Adjustable Compliant Joints. 1175-1181
- Christoforos E. Economakos, Fotis N. Koumboulis: A Safe Set Point Supervisor for MIMO Processes. 1182-1189
- Artzai Picón, Arantza Bereciartua, Jose Angel Gutierrez, Jose Perez: 3D High Precision Tube Bevel Measurement using laser based Rotating Scanner. 1190-1197
- Aleksey Bratukhin, Albert Treytl: Applicability of RFID and Agent-Based Control for Product Identification in Distributed Production. 1198-1205
- Paolo Ferrari, Alessandra Flammini, Daniele Marioli, S. Rosa, Andrea Taroni, C. Cattaneo, Cathryn Manduca: GDNET: a Specific Approach to Distributed Input/Output Synchronization for Plastic Machinery. 1206-1213
- Maxim Lobashov, Thilo Sauter: Vertical Communication from the Enterprise Level to the Factory Floor - Integrating Fieldbus and IP-based Networks. 1214-1221
- Valter Filipe Silva, Joaquim Castro Ferreira, José Alberto Fonseca: Dynamic Topology Management in CAN. 1222-1229
- Luís Gomes, Anikó Costa: Removing ill-structured arcs in Hierarchical and Concurrent State Diagrams. 1230-1237
- Jürgen Anke, Klaus Kabitzsch: Cost-based Deployment Planning for Components in Smart Item Environments. 1238-1245
- Ramon Piedrafita Moreno, José Luis Villarroel Salcedo: Petri Nets and Java. Real-Time Control of a flexible manufacturing cell. 1246-1253
- Manuel Coutinho, Carlos Almeida, José Rufino: VITRAL - A text mode window manager for real-time embedded kernels. 1254-1260
- Juan Antonio Gil-Martínez-Abarca, Francisco Maciá Pérez, Diego Marcos-Jorquera, Virgilio Gilart-Iglesias: Wake on LAN over Internet as Web Service. 1261-1268
- Goran Cengic, Oscar Ljungkrantz, Knut Åkesson: Formal Modeling of Function Block Applications Running in IEC 61499 Execution Runtime. 1269-1276
- Tanvir Hussain, Georg Frey: UML-based Development Process for IEC 61499 with Automatic Test-case Generation. 1277-1284
- Oliver Hummer, Christoph Sünder, Alois Zoitl, Thomas Strasser, Martijn N. Rooker, Gerhard Ebenhofer: Towards Zero-downtime Evolution of Distributed Control Applications via Evolution Control based on IEC 61499. 1285-1292
- Mohamed Khalgui, Xavier Rebeuf, Françoise Simonot-Lion: Component based deployment of industrial control systems: a hybrid scheduling approach. 1293-1300
- Marco Colla, Alessandro Brusaferri, Emanuele Carpanzano: Applying the IEC-61499 Model to the Shoe Manufacturing Sector. 1301-1308
- Kleanthis Thramboulidis: Design Alternatives in the IEC 61499 Function Block Model. 1309-1316
- Hirohisa Furuta, Akira Ishihara, Takayuki Yamaoka: Reusing a System Testing Process Using with a Model. 1317-1320
- Fragiskos A. Batzias, Christina G. Siontorou: Moving from Spontaneous to Cooperative/Concurrent R&D in Biotechnology - The Case of Biosensors. 1321-1328
- Michael Kuhl, Reimund Neugebauer: Quality and Process Control of Nd: YAG - Laser Welding Using fuzzy Pattern Recognition Techniques for Multisensor Systems. 1329-1332
- Kenzo Kurihara, Nobuyuki Nishiuchi, Manabu Nagai, Kazuaki Masuda: Branching Probabilities Planning of Stochastic Network for Project Duration Planning. 1333-1339
- Mohammed Bani Younis, Georg Frey: A Formal Method Based Re-Implementation Concept for PLC Programs and Its Application. 1340-1347
- Faicel Hnaien, Alexandre Dolgui: A Supply Planning Model for Multilevel Assembly Systems Under Random Lead Times. 1348-1351
data released under the ODC-BY 1.0 license. See also our legal information page
last updated on 2013-06-19T203413 by the dblp team