4. NEMS 2009: Shenzhen, China

• Lidong Du, Zhan Zhao, Cheng Pang, Zhen Fang, Yonghong Liu, Youjun Han:
  Micro solid state silicon plate wind velocity sensor. 1-4
  
• Haitao Ding, Zhenchuan Yang, Guizhen Yan:
  Performance comparison of methods to evading notching effect for SOG structures in DRIE. 5-8
  
• Ling-min Yu, Chang-Chun Zhu:
  Electrophoresis deposition and field emission properties of composites films ZnO nanoneedles/CNTs. 9-12
  
• Shubin Yan, Yingzhan Yan, Zhe Ji, Baohua Wang, Shaohui Wang, Guoqing Jiang, Jijun Xiong, Xiongying Ye, Zhaoying Zhou, Wendong Zhang:
  A precise measurement of quality factor for Planar Microtoroid Resonators. 13-16
  
• Xingli Zhang, Zhaowei Sun, Guoqiang Wu:
  Molecular dynamics simulation on the out-of plane thermal conductivity of monocrystal germanium thin-film. 17-20
  
• Xudong Zou, Kenle Chen, Hualiang Zhang, Jinwen Zhang:
  Design and simulation of 4-bit 10-14GHz RF MEMS tunable filter. 21-24
  
• Dong-Ming Fang, Hai-Xia Zhang, Xiao-Lin Zhao:
  Tunable MEMS capacitors considering deformation factor. 25-28
  
• Jikun Yi, Wei Li, Lingfang Wang, Zhiyu Wen:
  The simulation of frequency-capacitance characteristics of fresh water conductivity sensor. 29-32
  
• Shao-Chun Sun, Geng-Chen Shi:
  Research on the output characteristics of MEMS convective accelerometer under heavy impact. 33-36
  
• Jinghui Xu, Weizheng Yuan, Honglong Chang, Binghe Ma:
  Angularly parameterized macromodel extraction for microstructures with a large number of terminals. 37-40
  
• Michael Kraft, Haitao Ding:
  Sigma-delta modulator based control systems for MEMS gyroscopes. 41-46
  
• Ruican Hao, Decai Li:
  Preparation of kerosene based nano-magnetic fluid and its application in pressure difference sensors. 47-50
  
• Zhaoxin Geng, Qing Li, Wei Wang, Zhihong Li:
  Theoretical analysis and fabrication of PDMS-based surface plasmon resonance sensor chips. 51-54
  
• Bian Tian, Yulong Zhao, Zhuangde Jiang, Ling Zhang, Nansheng Liao, Yuanhao Liu, Chao Meng:
  The analysis and structural design of micro SOI pressure sensors. 55-58
  
• Kai Yang, Zhigang Li, Yupeng Jing, Dapeng Chen, Tianchun Ye:
  Research on the resonant frequency formula of V-shaped cantilevers. 59-62
  
• Nor Zaidi Haron, Said Hamdioui, Sorin Cotofana:
  Emerging non-CMOS nanoelectronic devices - What are they?. 63-68
  
• Tsung-Han Tsai, Dar-Sun Liou, Ping-Hei Chen, Chin-Ting Yang:
  Enhancement of mixing performance of water solutions in a micro-mixer with immiscible ferrofluid. 69-74
  
• Tao Chen, Liguo Chen, Baixu Liu, Jiachou Wang, Xinxin Li:
  Design of a four-arm structure MEMS gripper integrated with sidewall force sensor. 75-79
  
• Fengtian Han, Zhenbin Fu, Jingxin Dong:
  Design and simulation of an active electrostatic bearing for MEMS micromotors. 80-85
  
• Yibin Gong, Huamin Gao, Xiang Liu, Wenping Liu, Tie Li, Ping Zhou, Yuelin Wang:
  Silicon Nanowire fabricated by MEMS technology and its application in biochemical detection. 86-89
  
• Min Miao, Yufeng Jin, Hongguang Liao, Liwei Zhao, Yunhui Zhu, Xin Sun, Yunxia Guo:
  Research on deep RIE-based through-Si-via micromachining for 3-D system-in-package integration. 90-93
  
• Julien Arcamone, Marc Sansa, Jaume Verd, Arantxa Uranga, Gabriel Abadal, Nuria Barniol, Marc A. F. van den Boogaart, Juergen Brugger, Francesc Pérez-Murano:
  Nanomechanical mass sensor for monitoring deposition rates through confined apertures. 94-97
  
• X. Chen, D. F. Cui, L. L. Zhang:
  Design and fabrication of microfluidic chip with micro/nano structures. 98-101
  
• Hai Liu, Xiaohang Chen, Dong Xu, Zhongyu Hou, Yafei Zhang:
  Microfabricated breath sensor based on carbon nanotubes for respiration monitoring. 102-105
  
• Wenli Zhou, Sanping Wan, Chao Zhu:
  Analysis on electro-thermal property of micro-bubble generator using carbon nanotube heating elements. 106-111
  
• Tan D. Tran, Minh D. Nguyen, Long T. Nguyen, Tue H. Huynh, Thuy P. Nguyen:
  Novel synthesis design of a 3-DOF silicon piezoresistive micro accelerometer. 112-115
  
• Haibo Yu, Niandong Jiao, Zaili Dong, Yanli Qu, Wen J. Li, Yuechao Wang:
  Nanoscale welding by AFM tip induced electric field. 116-120
  
• Haijun Zhang, Changsheng Zhu, Qin Yang:
  Effect of effective viscosity on characteristics of microscale gas journal bearings. 121-125
  
• Liqiang Xie, Dingbang Xiao, Haoxu Wang, Xuezhong Wu, Shengyi Li:
  Sensitivity analysis and structure design for tri-mass structure micromachined gyroscope. 126-129
  
• Yi Liu, Yaquan Tang, Xiaomei Yu:
  SOI-based capacitive micromechanical resonator with submicron gap-spacing. 130-133
  
• Dong Ying, Gao Wei, You Zheng:
  Direct bonding SOI Wafer based MEMS cantilever resonator for trace gas sensor applicaiton. 134-138
  
• Haitao Cheng, Heng Yang, Yuelin Wang:
  Fabrication of nanobeam using Focused ion beam (FIB) and KOH etching. 139-142
  
• Hua Sun, Haixu Zhou, Xiang Li, Yanhui Wei, Xiao Li:
  Design of two-wheel self-balanced electric vehicle based on MEMS. 143-146
  
• Huiqi He, Donald C. Chang, Yi-Kuen Lee:
  Battery-powered miniaturized electroporation system for in-situ gene transfer in stem cell research. 147-151
  
• Kenle Chen, Yueyang Dai, Xudong Zou, Jinwen Zhang:
  A low-loss RF MEMS switch with dielectric layer on the lower surface of the bridge. 152-155
  
• Lingyun Wang, Yibo Zeng, Wenwang Li, Daoheng Sun:
  Etch-back in DDSOG process by ultrasonic agitation and application to tunneling gyroscope fabrication. 156-159
  
• Qijun Xiao, Wenyuan Chen, Gaoyin Ma, Feng Cui, Shengyong Li, Weiping Zhang:
  Simulation of levitation control for a micromachined electrostatically levitated gyroscope. 160-163
  
• Jia-Hong Zhang, Qing-An Huang, Hong Yu:
  Effect of temperature and elastic constant correction on piezoresistivity of silicon nanobeams. 164-167
  
• Chi-Yuan Lee, Shuo-Jen Lee, Yuh-Chung Hu, Chen-Hen Lin, Yu-Ming Lee, Wei-Yuan Fan:
  Integration of micro temperature sensor and metal foil as gas diffusion layer for micro fuel cell. 168-171
  
• Chi-Yuan Lee, Shuo-Jen Lee, Wen-Pin Shih, Chen-Hen Lin, Chi-Chung Chang, Pei-Zen Chang:
  Fabrication of micro temperature sensor and heater in a stainless steel-based micro reformer. 172-175
  
• Siva Penmetsa, Tianhua Zhang, Zhongcheng Gong, Tae-woo Lee, Long Que:
  Design and modeling of a tunable optical antenna enabled by a micromachined actuator. 176-180
  
• Tianhua Zhang, Zhongcheng Gong, Long Que:
  A white-light source operated polymer-based micromachined Fabry-Perot chemo/biosensor. 181-184
  
• Wang Ya-Zhou, Chen Li-Xin, Song Jia-Le:
  Characterization of Si₃N₄/SiC Microstructure Derived from UV curable polymer ceramic precursor pyrolyzing. 185-189
  
• Hai-feng Zhang, Xiao-wei Liui, Zhi-cheng Peng, Xi-Lian Wang, Wei Wang, Yu-feng Chen:
  Design of movable contactless conductivity detector for microchip capillary electrophoresis. 190-193
  
• Xiuling Zhang, Feng Jin, Jianxin Xing:
  Electroreduction of nitrite based on Ag/PPy nanowires modified electrodes. 194-197
  
• Xuejiao Fan, Dacheng Zhang:
  Parameter characterization of anodic bonded electrical interconnect in MEMS/NEMS devices. 198-201
  
• Pingan Zhao, Yinqing Li, Xiangyu Zeng, Jia Zhou, Yiping Huang, Ran Liu:
  EWOD using P(VDF-TrFE). 202-205
  
• Weihua Li, Wenzhong Lou, Xin Li, Rongsen Hong, Liang Hu:
  Integration micro-magnetic sensor and accelerometer microsystem for orienting application. 206-210
  
• Wei-Hsin Gau, Shin-Chun Huang, Yuh-Chung Hu:
  Fabrication and vibration analysis of micro-cross beams. 211-214
  
• Xu Zhao, Xin Zhao, Guizhang Lu:
  State engine based validation of MEMS process sequences. 215-218
  
• Chen-Hsun Weng, Chih-Chia Huang, Chen-Sheng Yeh, Gwo-Bin Lee:
  Using micro-reactors to synthesize alloy FeGa₂O₄ magnetic nanoparticles. 219-222
  
• Dar-Bin Shieh, Chia-Chun Hsieh, Song-Bin Huang, Gwo-Bin Lee:
  A microfluidic-based cell culture platform for cellular and subcellular imaging. 223-226
  
• Sung-Yi Yang, Fong-Yu Cheng, Chen-Sheng Yeh, Huan-Yao Lei, Gwo-Bin Lee:
  Synthesis of gold nanoparticles using a vortex-type micro-mixing system. 227-230
  
• Song Xing, Dong Haifeng, Fang Jiancheng:
  Chip scale atomic magnetometer based on SERF. 231-234
  
• Liang Hu, Wenzhong Lou, Renlong Song, Chao Gao, Xin Li:
  A novel design of micro-magnetic sensor guidance system for the blind. 235-237
  
• Yang Yang, Jing Liu:
  Controlling of micro/nano fluidics array using single ice valve. 238-243
  
• Yang Yang, Jing Liu:
  Theoretical characterization on nano freeze tweezer enabled from convective cooling principle. 244-248
  
• Chi-Chang Lin, Chen-Yuan Yu, Ying-Mei Yang, Yung-Ming Chu, Hong-Ping Lin, Hsien-Chang Chang:
  A novel SERS active particle with highly bio-organics absorption affinity for the description of bacteria fingerprint. 249-252
  
• Jianbing Xie, Weizheng Yuan, Honglong Chang:
  A novel method for the manufacture of MEMS devices with large exposed area based on SOI wafers. 253-256
  
• Yunhuan Zheng, Jianzhang Wu, Jianbo Shao, Qinghui Jin, Jianlong Zhao:
  Development of a novel perfusion microfluidic cell culture device for cell-based assays. 257-260
  
• Wenzhong Lou, Renlong Song, Yunjian Liu, Xiaosong Liu, Weihua Li, Wanfeng Lin:
  A novel multi-direction high shock reliability test on MEMS devices. 261-264
  
• Zhigang Che, Liangcai Xiong, Tielin Shi, Zirong Tang, Huayang Cheng, Likun Yang:
  Numerical and experimental study of Microscale Laser Shock Processing using excimer laser. 265-269
  
• Cheng Pang, Zhan Zhao, Jiangang Zhang, Li Shi, Lidong Du, Zhen Fang, Yonghong Liu:
  An advantageous fabrication technology to integrate pressure sensor into multi-sensor for micro weather station. 270-273
  
• C. K. Chung, W. T. Chang:
  Comparison of methods for sensing contact potential difference of nanocrystalline alloy films using a kelvin actuating capacitor. 274-277
  
• Zhongcheng Gong, Krithika Nagarajan, Siva Penmetsa, David Mills, Long Que:
  A patch-clamp device with integrated actuators for cell selection and positioning. 278-281
  
• Gaoyin Ma, Wenyuan Chen, Qijun Xiao, Weiping Zhang, Feng Cui, Kai Li:
  Single-neuron spinning control system for a non-silicon micromachined rotational gyro. 282-285
  
• Yan Cui, Huilin Chen, Jinsong Xia, Jiaxin Zhao, Jing Wang, Liding Wang:
  Study on PSZT thin films for microforce sensors. 286-290
  
• Yipeng Lu, Weiping Zhang, Xiaosheng Wu, Wenyuan Chen, Feng Cui:
  Design and analysis of novel solid biaxial micro-gyroscope with special mode excitation. 291-294
  
• Jizhou Sun, Chao Bian, Lan Qu, Shanhong Xia:
  A micro amperometric immunosensor immobilized with electropolymerized staphylococcal protein a for the detection of salmonella typhimurium. 295-298
  
• Zhuangde Jiang, Fengxia Zhao, Weixuan Jing, Philip D. Prewett, Kyle Jiang:
  Characterization of line edge roughness and line width roughness of nano-scale typical structures. 299-303
  
• Xiaosheng Wu, Wenyuan Chen, Weiping Zhang, Yipeng Lu, Feng Cui, Xiaolin Zhao:
  Modeling analysis of piezoelectric micromachined modal gyroscope (PMMG). 304-309
  
• Yinhong Dai, Donghang Chen, Lingyun Wang, Daoheng Sun:
  Investigations on electrohydrodynamical drop-on-demand inkjet printing. 310-313
  
• Yu-Cheng Ou, Chih-Wen Hsu, Lung-Jieh Yang, Hsieh-Cheng Han, Yi-Wen Liu, Chien-Yuan Chen:
  The micropatterns of glutaraldehyde-crosslinked gelatin as ECM for attachment of tumor cells. 314-318
  
• Chenying Yang, Wei Wang, Zhihong Li:
  Optimization of corona-triggered PDMS-PDMS bonding method. 319-322
  
• Jing Wang, Bing Qu, Yan Ming Su, Chao Pan, Wei Guo Cai:
  Artifical fish flocked surface as a possible anti-biofoulant. 323-326
  
• Ke Tao, Dexian Zhang, Yun Sun, Linshen Wang, Jingfang Zhao, Ying Xue, Yuanjian Jiang, Hongkun Cai, Yanping Sui, Jin Wang:
  Boron doped hydrogenated nanocrystalline silicon thin films prepared by layer-by-layer technique and its application in n-i-p flexible amorphous silicon thin film solar cells. 327-330
  
• Jin Wang, Guofeng Li, Yiyi Liu, Yi Lu, Xianhu Gao, Yong Zhang, Ke Tao:
  Vehicle supervision system based on MEMS geomagnetic sensor. 331-334
  
• Yi Jae Lee, Jung Doo Kim, Jae Yeong Park:
  Nafion coated enzyme free glucose micro-biosensors for anti-fouling of protein. 335-338
  
• Dingbang Xiao, Liqiang Xie, Zhanqiang Hou, Xuezhong Wu, Shengyi Li:
  Analyzing the frequency response of micromachined capacitive inertial devices by the third harmonic detection. 339-342
  
• Xiuling Ji, Yunjian Liu, Wenzhong Lou:
  Design and parametric study of a tubular passive micro direct methanol fuel cell. 343-347
  
• Kashif Naeem, Ouyang Feng:
  Effect of calcination on photocatalytic activity of Fe³⁺-doped TiO₂ nanoparticles for degradation of phenol under UV irradiation. 348-352
  
• Ping Tang, Jian Yang, Jianjun Ye, Jinyang Zheng, Chikong Lam, Ieong Wong, Yanbao Ma:
  Using the improved DSMC method to predict the reliability of micro-flow channels. 353-358
  
• Fu-Wen Yeh, Lung-Jieh Yang, Guo-Yuan Hess, Ching-Jiun Lee, Che-Chien Chu, Horn-Jiunn Sheen:
  The arrowed surface ratchets with hydrophobic parylene for droplet transportation. 359-362
  
• Kuan-Yu Chen, Ju-Nan Kuo:
  Diffraction angle prediction of surface micromachined planar curved grating and crossed grating. 363-366
  
• Guangmei Zhai, Daoli Zhang, Lin Yuan, Jianbing Zhang:
  Synthesis and studies of spindle-shaped lead selenide nanocrystals. 367-370
  
• Jia Hao Zhao, Shi Jie Yu, Ke Li, Ying Dong, Qin Zhou, Zheng You:
  Improvement of a micro-beam in a smart gas sensor with resonating mechanism. 371-375
  
• Guanggui Cheng, Jianning Ding, Biao Kan, Junziong Wang, Ningyi Yuan:
  Study on the electrical contact property at the interface of the NiCr/TiW films. 376-379
  
• Khashayar Babaei Gavan, Joost van der Heijden, Emile W. J. M. van der Drift, Herre S. J. van der Zant:
  Effect of pressure on the Q factor and the resonance frequency of SiN microcantilevers. 380-384
  
• Hung-Chia Lin, Yi-Ju Liu, Da-Jeng Yao:
  DNA ligation using coplanar electrodes electro-wetting-ondielectric (EWOD) device. 385-389
  
• Fei-Bin Hsiao, Yung-Chun Lee, Lee Chang Hsiang:
  Lamb wave excitation on non-piezoelectric materials using Lorentz force induced by current in meander line structure. 390-395
  
• Weiping Chen, Xiaoliang Chen, Guoguang Zheng, Xiaowei Liu, Haifeng Zhang:
  Analysis of the self-test characteristics of a micromachined accelerometer. 396-399
  
• Hamed Sadeghian, Chung Kai Yang, Khashayar Babaei Gavan, Hans Goosen, Emile W. J. M. van der Drift, Here van der Zant, Paddy J. French, Andre Bossche, Fred van Keulen:
  Surface contamination-induced resonance frequency shift of cantilevers. 400-403
  
• Jinhui Lan, Yuqiao Shi:
  Vehicle detection and recognition based on a MEMS magnetic sensor. 404-408
  
• Aimiao Qin, Yuzi Liu, Zhong Lin Wang:
  Solution growth of HgTe Nanoweires at lowtemperature. 409-412
  
• J. N. Ding, H. S. Qi, N. Y. Yuan, Y. L. He, G. G. Cheng:
  Influence of post-annealing on the mechanical and electrical properties of boron-doped nanocrystalline silicon thin films. 413-415
  
• Sen Yao, Shunji Goto, Junpei Sakurai, Tadahiko Shinshi, Minoru Uehara, Hitoshi Yamamoto:
  SiN-based micro cantilever actuators using NdFeB/Ta permanent magnetic thin film. 416-419
  
• Zongwei Niu, Zhiyong Li, Li Li, Rongguo Hou:
  Optimization of process parameters based on ANN when synthesizing nano-size hydroxyapatite using Solgel method. 420-423
  
• Zongwei Niu, Zhiyong Li, Li Li, Rongguo Hou:
  Thermodynamics analyse of the synthesizing of nano-size hydroxyapatite using Sol-gel method. 424-427
  
• Gang Zhao, Wen Li, Guanrong Tang, Jing Chen:
  Fabrication of bulk titanium out-of-plane microneedles. 428-431
  
• Yue Chen, Xiuhan Li, Dong-Ming Fang, Quan Yuan, Haixia Zhang:
  Spiral capacitor based on copper electroplating. 432-435
  
• Jinxing Wang, Apurba Laha, Andreas Fissel, Dominik Schwendt, Rytis Dargis, Tatsuro Watahiki, Roman Shayduk, Wolfgang Braun, Tianmo Liu, H. Jörg Osten:
  Structural and strain relaxation study of epitaxially grown nano-thick Nd₂O₃/Si(111) heterostructure. 436-440
  
• Yi Zhou, Fei Ding, Chao Ni, Wei Wang, Wengang Wu:
  Bottom-up fabrication of special parylene films based on selective growth on Au-coated surface. 441-444
  
• Shailesh Madisetti, Zhiguo Zheng, Zhongcheng Gong, Siva Penmetsa, Yuri Lvov, Long Que:
  Layer-by-layer nanoscale-coating of microparticles with a droplet microfluidic device. 445-448
  
• Qinglong Zheng, Zhuo Wang, Yong Xu:
  Design and optimization of parylee nanomechanical cantilevers with integrated piezoresistors for surface-stress based biochemical sensing. 449-453
  
• Sewan Park, Joonyeop Lee, Hyeon Cheol Kim, Kukjin:
  A study on inteference between 3D MEMS inductor and VCO. 454-457
  
• Yuguang Li, Yinfeng Liu, Liping Wang, Beilei Gu, Haiyan Mao, Hefeng Hu, Li Liu, Ying Gu, Yiben Xia:
  UV absorption and photoluminescence of nanometer-sized ZnS prepared by different routes. 458-462
  
• Huiqi He, Donald C. Chang, Yi-Kuen Lee:
  Battery-powered miniaturized electroporation system for in-situ gene transfer in stem cell research. 463-467
  
• Chaohui Wang, Peng Ye, Kerun Lee, Jingju Wang, Jing Wang:
  The design and fabrication of a new blood-filtering chip based on SU-8 and PDMS. 468-471
  
• Lei Nie, Tielin Shi, Zirong Tang, Shiyuan Liu, Guanglan Liao:
  Low temperature direct bonding for hermetic wafer level packaging. 472-475
  
• Xuezhong Wu, Peitao Dong, Zhaoze li, Shengyi Li, Qinghui Liu, Chao Xu, Hong Wan:
  Design, fabrication and characterization of a solid propellant micro-Thruster. 476-479
  
• Jing Zhang, Kaizhou Tan, Siliu Xu, Zhengfan Zhang, Yukui Liu, Guangbing Chen, Kaicheng Li, Heming Zhang, Huiyong Hu:
  A novel p+ Poly-SiGe Gate CMOS device. 480-484
  
• T. W. Chang, T. J. Chung, T. Ru, T. E. Nee, H. C. Lu, G. M. Wu:
  Investigation of InGaN/GaN multiple quantum wells with strain relief behavior for light-emitting diodes. 485-488
  
• Guangyi Shi, Yuexian Zou, Yufeng Jin, Yali Zheng, Wen J. Li:
  Multi-category human motion recognition based on MEMS inertial sensing data. 489-493
  
• Li Zhang, Jun Yao, Dajia Wang, Hongsheng Zhong:
  Distributed MEMS transmission line-based uniplanar compact electromagnetic bandgap (UC-EBG) tunable filters. 494-497
  
• Xuebin Lu, Xiaowei Liu, Rongyan Chuai, Changzhi Shi, Mingxue Huo, Weiping Chen:
  Piezoresistive properties of heavily doped P-type polysilicon films. 498-501
  
• Liang Yin, Xiaowei Liu, Wei Chen, Weiping Chen, Zhiping Zhou:
  A low-noise CMOS interface circuit for closed-loop accelerometer. 502-505
  
• Xu Mao, Zhenchuan Yang, Zhihong Li, Guizhen Yan:
  The method of prevent footing effect in making SOI micro-mechanical structure. 506-509
  
• Yuntao Liu, Xiaowei Liu, Liang Yin, Weiping Chen, Qun Wu:
  CMOs interface circuitry for a closed-loop capacitive MEMS accelerometer. 510-513
  
• Gang Zhao, Yao Tian, Qiong Shu, Jing Chen:
  Evalution of bulk titanium DRIE Using SU-8 as soft mask. 514-517
  
• Chen-Chieh Liao, Ju-Nan Kuo:
  Shape and thermal effects of metal films on stress-induced bending of surface micromachined curved grating. 518-521
  
• Qingzhou Li, Ping Song, Kejie Li:
  Structure optimization of a monolithic high-shock three-axis piezoresistive accelerometer using Ant Colony Optimization. 522-526
  
• C. K. Chung, T. R. Shih, B. H. Wu:
  Simulation of the novel micro-valve using dynamic analysis. 527-530
  
• Chuanwei Zhang, Shiyuan Liu, Tielin Shi:
  Metrology of deep trench structures with polarized FTIR reflectance spectrum. 531-534
  
• C. K. Chung, T. R. Shih, B. H. Wu:
  Characteristics of truncate-angle rhombic micromixer and rapid mold fabrication using CO₂ laser micromachining. 535-538
  
• Jenn-Sen Lin, Shin-Pon Ju, Shih-Wen Yung, Wen-Shian Wu, Meng-Hsiung Weng, Wen-Jay Lee:
  Mechanical and dynamical behavior of carbon nanotube with defects: A molecular dynamics simulation. 539-542
  
• Guo L. Sun, Hai R. Wang, Zhuang D. Jiang, Xian N. Gao, Tian S. Yin, Guo Q. Han:
  Design of Pt electrode in a SO₂ gas sensor based on LaF₃solid electrolyte. 543-546
  
• Shuhua Wei, Jinzhao Zhang, Li Han:
  Design and implementation of software system of E-beam lithography based on SEM. 547-550
  
• C. K. Chung, Y. L. Chang, T. S. Chen:
  Influence of substrate bias on the resistivity and TCR of nanostructured Ta-Si-N films. 551-554
  
• Yumei Xing, Yigui Li, Junfeng Zhang, Gaoyang Gao:
  Surface acoustic wave linear motor for two-dimensional optical positioning system. 555-558
  
• Fubo Rao, Tie Li, Yuelin Wang:
  Synthesis of horizontally aligned single-walled carbon nanotubes without external force and their growth characteristics. 559-562
  
• Yuexian Zou, Guangyi Shi, Yufeng Jin, Yali Zheng:
  Extraocular image processing for retinal prosthesis based on DSP. 563-566
  
• Fei Ding, Wenxuan Yu, Tingting Yu, Chao Ni, Ruyan Tang, Wengang Wu:
  A novel integrated micro-scale closed synthetic-jet-like flow field as gas lubrication in MEMS devices. 567-571
  
• Weiwei Xiang, Li Wen, Hai Wang, Qiuping Zhang, Jiaru Chu:
  Electrical and optical testing system for microplasma in scanning plasma etching. 572-576
  
• Li Wen, Qiuping Zhang, Weiwei Xiang, Hai Wang, Jiaru Chu:
  Design and fabrication of the microplasma reactor for maskless scanning plasma etching. 577-580
  
• Lujun Zhang, Andre Bossche:
  Low voltage plug dispersion compensation for moving field capillary electrophoresis with flow loss via the side channels. 581-584
  
• Yeon H. Kwak, Soon S. Park, Sung M. Hong:
  A new 2D structure for chemotaxis measurement of adhesive cells. 585-588
  
• Dezhi Wu, Lingyun Wang, Daoheng Sun:
  Patterned deposition of PEO nanofibers. 589-592
  
• Di Wang, Xiaodong Chen, Qun Zhang, Yu Liu, Jincheng Liu, Lijiang Hu:
  Calculation of phase transformation of vanadium oxide using MD simulation and its validation by experimental values. 593-596
  
• Lan Qu, Chao Bian, Jizhou Sun, Zhenxing Ren, Jinghong Han, Shanhong Xia:
  Electrochemical synthesis of gold nanoparticles in polypyrrole for antibody immobilization. 597-600
  
• D. Wu, H. Y. Mao, W. G. Wu:
  Fabrication of compact collateral silicon nanowires based on continuously alternating deposition. 601-604
  
• Yu Liu, Zushun Lu, Xiaodong Chen, Di Wang, Jincheng Liu, Lijiang Hu:
  Study on phenolic-resin/carbon-fiber ablation composites modified with polyhedral oligomeric silsesquioxanes. 605-608
  
• Ki-Young Dong, Youngmin, Seung-Il Moon, Jinwoo Lee, Jinnil Choi, Byeong-Kwon Ju:
  Design of a multi-walled carbon nanotubes vacuum gauge. 609-611
  
• Ahra Lee, SangChul Lee, Sungsik Lee, Chang Han Je, Sunghae Jung, Myoung-Lae Lee, Gunn Hwang, Byoung-Gon Yu, Chang Auck Choi:
  Chip scale packaging with surface mountable solder ball terminals for microsensors. 612-615
  
• Jun Xu, Bo You, Xin Li, Jing Ma:
  A high sensitivity quartz tuning fork temperature sensor. 616-619
  
• Junfeng Zhang, Yigui Li, Chun Hui, Yumei Xing, Yang Gao:
  Research on a novel SAW actuator of Floating Electrode Unidirectional Transducer. 620-623
  
• Jie Gong, Zirong Tang, Tielin Shi, Guanglan Liao, Lei Nie, Shiyuan Liu:
  Improved adhesion between C-MEMS and substrate by micromechanical interlocking. 624-627
  
• Lukasz S. Pakula, Vijayekumar Rajaraman, Patrick J. French:
  SOI digital accelerometer based on pull-in time configuration. 628-631
  
• Yuexian Zou, Yali Zheng, Yufeng Jin, Guangyi Shi:
  Signal modulation schemes comparison in the telemetry unit for retinal prosthesis system. 632-636
  
• Chi-Yuan Lee, Shuo-Jen Lee, Yu-Ming Lee, Kuan-Yu Chu:
  Integration of micro flow sensor and flexible substrate as GDL in micro fuel cell. 637-640
  
• Hsiao-Yeh Chu, Ming-Hang Weng, Ru-Yuan Yang, Chien-Wei Huang, Chia-Hsing Li:
  Effect of Al thickness on the Al induced low temperature poly-si film crystallization process. 641-644
  
• Chakravarthy Yamarthy, Shamus McNamara:
  Design of a MEMS sensor to detect the Casimir force. 645-648
  
• M. D. Nguyen, R. J. A. Steenwelle, P. M. te Riele, J. M. Dekkers, D. H. A. Blank, G. Rijnders:
  Ferroelectric and dielectric properties of Pb(Zr, Ti)O₃ thin film capacitors. 649-652
  
• Yuping Zhang, Yanyan Wang, Lanxin Lv, Shancheng Yan, Haitao Wang, Yong Zhang, Dan Zhu, Ningping Huang, Zhongdang Xiao:
  Cell affinity of PHBV thin films evaluated by a parallel plate flow chamber. 653-656
  
• Rawat Jaisutti, Wittawat Yamwong, Sirapat Pratontep, Tanakorn Osotchan:
  Effect of opposite side electrodes in organic field-effect transistor structure. 657-660
  
• Zhuangde Jiang, Libo Zhao, Yulong Zhao, Philip D. Prewett, Kyle Jiang:
  Research and evaluation of a high temperature pressure sensor chip. 661-665
  
• Jianjun Ye, Jian Yang, Jinyang Zheng, Ping Xu, Chikong Lam, Ieong Wong, Yanbao Ma:
  Effects of wall temperature on the heat and mass transfer in microchannels using the DSMC method. 666-671
  
• Henan Ni, Liangcai Wu, Zhitang Song, Chun Hui:
  Memory characteristics of double-layer metal and semiconductor heterogeneous nanocrystals embedded in SiO₂. 672-675
  
• Xin Xu, Bogdan Bercu, Francois Lime, Laurent Montes:
  Finite elements study of high mechanical stress in nanostructures for innovative NEMS sensors. 676-681
  
• Huajun Fang, Xingming Liu, Litian Liu:
  A uncooled a-Si infrared detector with novel thermal isolation method. 682-685
  
• Chang-Zhi Shi, Xiao-Wei Liu, Rong-Yan Chuai:
  DC electrical trimming characteristics of polysilicon nanofilms with different doping concentrations. 686-689
  
• Shiyou Xu, Yong Shi:
  High sensitivity, low operational temperature ITO nano gas sensor with integrated circuits. 690-693
  
• Surachai Pengmanayol, Tanakorn Osotchan:
  Effect of mixing hopping sites for carrier transport in organic semiconductor nanodevices. 694-697
  
• Dongbing Geng, Liming Zeng, Yi Li:
  Thermo-oxidative stability of Nano-SiO₂ /bismaleimide composite. 698-702
  
• Ji-Hong Kim, Sung-Min Hong, Jang-Sub Lee, Byung-Moo Moon, Kunnyun Kim:
  High sensitivity capacitive humidity sensor with a novel polyimide design fabricated by MEMS technology. 703-706
  
• C. C. Su, C. H. Li, N. K. Chang, T. C. Wu, S. H. Chang:
  Fabrication of carbon nanocoils based tactile sensor. 707-710
  
• Amir Farrokh Payam, Morteza Fathipour, Mohammad Javad Yazdanpanah:
  A backstepping controller for piezoelectric actuators with hysteresis in nanopositioning. 711-716
  
• Amir Farrokh Payam, Mohammad Javad Yazdanpanah, Morteza Fathipour:
  Design of a feedforward controller for AFM nanopositioning based on neural network control theory. 717-721
  
• Guo Q. Han, Zhuang D. Jiang, Wei X. Jing, Hai R. Wang, Guo L. Sun, Ming Z. Zhu:
  Fabrication and characterization of nano-scale lines through anodic porous alumina membrane. 722-725
  
• Jing-Hui Wang, Meng-Ku Chi, Lung-Ming Fu, Che-Hsin Lin:
  Experimental and numerical investigations into high-voltage pulsed DC electric fields for enhancing CE chip performance. 726-730
  
• Hailin Cong, Tingrui Pan:
  Microfabrication of conductive PDMS on flexible substrates for biomedical applications. 731-734
  
• Hailin Cong, Alexander Revzin, Tingrui Pan:
  Micropattern-assisted nanoassembly: Ordered nanocolloidal array on PEG microstructures. 735-738
  
• Wei Tang, Zhe Chen, Haixia Zhang:
  A novel method of anodic bonding. 739-742
  
• Pin Lv, Zhe Chen, Alice H. X. Zhang:
  Effect of laser annealing on amorphous silicon carbide films prepared by PECVD. 743-746
  
• Tzong-Shyng Leu, Horng-Jiann Song:
  New pumping mechanism by surface waves in a microchannel. 747-750
  
• Chun-Ping Jen, Ching-Te Huang, Yun-Hung Lu:
  Numerical investigation of biochemical binding kinetics on the microfluidic chip with FO-LPR. 751-753
  
• Deyong Chen, Zhengwei Wu, Xiaojing Shi, Junbo Wang, Lei Liu:
  Design and modeling of an electromagnetically excited silicon nitride beam resonant pressure sensor. 754-757
  
• Guang He, Geng-Chen Shi:
  On the mechanical behavior of LIGA nickel. 758-762
  
• Kui Zou, Xiuhan Li, Haixia Zhang:
  Transcutaneous power link design for implanted systems. 763-766
  
• Yung-Chun Lee, Pin-Chang Chen, Hung-Yi Lin:
  Fabrication of seamless roller mold with excimer laser direct writing technology. 767-770
  
• Yunguang Ji, Yueh-Jaw Lin, Alper Buldum:
  An investigation of buckypapers' Young's modulus utilizing nanoscale modeling and Molecular Dynamics simulation. 771-774
  
• Yung-Chun Lee, Yi-Chien Lin, Chen-Hui Tsai:
  A novel method for fabricating aspheric fiber lens and its applications. 775-778
  
• Yung-Chun Lee, Hsueh-Liang Chen, Chun-Hung Chen, Hung-Yi Lin:
  Infrared heating and roller-based contact printing technology for the fabrication of micro/nano-structures. 779-782
  
• C. K. Chung, J. J. Jhu:
  Effect of nitrogen flow ratios on microstructure and mechanical properties of nanocomposite Ti-Si-N thin flims. 783-786
  
• Shou-Ping Hsu, Kao-Feng Yarn, Win-Jet Luo, I-Ting Hsieh, Hong-Jun Ye, Meng-Hua Chung:
  Microfluidic mixing with electrokinetic instability in a double T-shaped microchannel. 787-792
  
• Chi-Chang Lin, Ying-Mei Yang, Hsien-Chang Chang:
  Raman descrimination of Helicobacter pylori fingerprint in dielectrophoresis chip. 793-796
  
• Xian Huang, Siqi Li, Jerome Schultz, Qian Wang, Qiao Lin:
  A biocompatible affinity MEMS sensor for continuous monitoring of glucose. 797-802
  
• Chengkuo Lee, Jin Xie:
  Development of vacuum packaged CMOS thermoelectric energy harvester. 803-807
  
• Chengkuo Lee, Wenfeng Xiang, Jayaraj Thillaigovindan, Fu-Li Hsiao:
  Nanomechanical cantilever sensor using optical nanocavity resonator. 808-812
  
• Yanli Qu, Zaili Dong, Steve C. H. Tung, Wen J. Li:
  Experimental investigation on the dynamic response of thermal EG-CNT flow sensors. 813-817
  
• Zhen Chen, Yu Zhao, Wei Wang, Zhihong Li:
  Microfluidic patterning of nanoparticle monolayer: Mechanism analysis and noncontinuously patterning approach. 818-821
  
• Michael Junkin, Donna D. Zhang, Pak Kin Wong:
  Plasma lithography for control of cell morphology and proliferation. 822-826
  
• Mandy L. Y. Sin, Vinay Gidwani, Vincent Gau, Pak Kin Wong:
  An electrothermal micromixer for molecular analysis. 827-831
  
• Vinay Gidwani, Yi Lu, Donna D. Zhang, Pak Kin Wong:
  Nanoengineered platforms for cancer chemoprevention. 832-836
  
• Guanghui Bai, Wei Teng, Xianggang Wang, Hui Zhang, Peng Xu:
  Kinetic and processing studies on a novel technology of producing high purity nano-silicon dioxide from an alumina rich coal fly ash with carbon dioxide. 837-842
  
• Sumana Kladsomboon, Sirapat Pratontep, Theeraporn Puntheeranurak, Teerakiat Kerdcharoen:
  Investigation of thermal and methanol-vapor treatments for MgTPP as an optical gas sensor. 843-847
  
• Drazen Fabris, Tsutomu Saito, Toshishige Yamada, Xuhui Sun, Patrick Wilhite, Cary Y. Yang:
  Current capacity and thermal transport in carbon nanofiber interconnects. 848-853
  
• Cheng-Hsin Chuang, Yu-Chi Chen, You-Ming Hsu, Huei-Sheng Huang, Fei-Bin Hsiao, Chin-Hung Wang:
  A DEP chip with arc-shape microelectrode arrays for the separation of different-size particles. 854-857
  
• Tao Sun, Soichiro Tsuda, Klaus-Peter Zauner, Hywel Morgan:
  Single cell imaging using electrical impedance tomography. 858-863
  
• Sadollah Ebrahimi, Jamshid Sabbaghzadeh, Maryamalsadat Lajvardi, Iraj Hadi:
  Nanolayer effects in cooling performance of a microchannel heat sink with nanofluids containing CNTs. 864-867
  
• Yuan Li, Zhenchuan Yang, Guizhen Yan:
  An improved method to remove anti-footing Al layer after DRIE. 868-871
  
• Qiang Liu, Bo Liu, Zhihong Li:
  Improvement of Au cantilever fabrication process with Cu as a sacrificial layer. 872-876
  
• Chi-Chang Lin, Chen-Yuan Yu, Ying-Mei Yang, Yan-Fu Chen, Hsien-Chang Chang:
  Functionalized bio-nanoparticles in immunosensing using Surface-Enhanced Raman scattering methods. 877-880
  
• Jian Luo, Haitao Ding, Michael Kraft:
  A new design methodology for electro-mechanical Sigma- Delta-Modulators. 881-884
  
• C. K. Chung, T. C. Chen, T. R. Shih, W. T. Chang:
  Fabrication of a novel micro liquid flow sensor using a TaN thin film. 885-888
  
• Qinghui Liu, Xuezhong Wu, Di Di, Peitao Dong, Dapeng Fan:
  Design of a novel MEMS IDT dual axes surface acoustic wave gyroscope. 889-892
  
• Zhuxin Dong, Uchechukwu C. Wejinya, Wen J. Li:
  Calibration of MEMS accelerometer based on plane optical tracking technique and measurements. 893-897
  
• Ding-jun Xu, Zheng-yong Zhang, Zhen Yu:
  Analysis on thermal balance and design principles of catalytic combustion gas sensor. 898-903
  
• Chia-Hsien Yeh, Po-Wen Lin, Qiaole Zhao, Tsung-Che Chou, Yu-Cheng Lin:
  Application of microfluidic system to construct cross-linked chitosan microfibers by PDMS chip. 904-906
  
• Xianju Huang, Yu Tang, Renxin Wang, Chuang Qian, Wei Wang, Zhihong Li:
  A novel 3D flexible parylene-metal structure fabrication technique. 907-910
  
• Shenggui Wang, Liwei Lin, Hang Guo:
  Analysis and design of a micromachined Rb-85 filter in passive rubidium atomic clock. 911-914
  
• Yi Zhang, Daqun Bao, Hang Guo:
  Growth and characterization of PZT thin films with A Pt/Ti layer on silicon substrate. 915-918
  
• Yu Jin Kim, Il-Kyu Park, Jin Soo Kim, Joon Hwang, Eui-Sik Chung, Kang Moo Huh, Yong-kyu Lee:
  Anticancer drug delivery for tumor targeting and therapy. 919-922
  
• Anzhou Hou, Henan Ni, Chun Hui, Ailan Xu:
  The development of piezoelectric biosensor based on nano-crystalline PZT/quarts. 923-925
  
• Yanfeng Jiang, Xiaobo Zhang, Bing Yang:
  Study on self-alignment property of silicon nanowire in temperature gradient. 926-929
  
• Yi-feng Wang, Rui-jin Wang, Ling-na Wang:
  Research on mixing mechanism of micromixer based on segmented gas-liquid flow. 930-934
  
• Shengli Zhou, Qing Shan, Fei Fei, Wen J. Li, Chung Ping Kwong, Patrick C. K. Wu, Bojun Meng, Christina K. H. Chan, Jay Y. J. Liou:
  Gesture recognition for interactive controllers using MEMS motion sensors. 935-940
  
• Jeou-Long Lee, Yung-Kang Shen, Yi Lin, Ping-Tun Teng, Chuan-Min Huang:
  Fabrication and analysis of microfluidic mold insert by micro electrical discharge machining. 941-945
  
• Yiting Yu, Weizheng Yuan, Bin Yan, Taiping Li, Lanlan Wang:
  Two new micro programmable gratings and their potential applications. 946-949
  
• S. Subramanian, J. S. Rathore, N. N. Sharma:
  Design and analysis of helical flagella propelled nanorobots. 950-953
  
• Benjaporn Treetharnmathurot, Chitchamai Ovatlarnporn, Juraithip Wungsinthaweekul, Ruedeekorn Wiwattanapatapee:
  Chemical modification and thermal stability study of ss-cyclodextrin- and PAMAM-trypsin conjugates. 954-959
  
• Yung-Chiang Chung, Yu-Cheng Lin, Chaung-Di Chueh, Chuan-You Ye, Li-Wei Lai, Wei-Chieh Liao:
  Microfluidic chip of fast DNA hybridization using denature and motion of nucleic acids. 960-963
  
• Ding Yuan, Pengliang Ci, Fei Tian, Jing Shi, Shaohui Xu, Peisheng Xin, Lianwei Wang:
  The improvement of electrochemical etching process for silicon microchannel plates. 964-969
  
• Her-Terng Yau, Cheng Chi Wang, Ching-Chang Cho, Ming-Jyi Jang:
  Numerical simulation of an electrokinetic micromixer using harmonic and chaotic electric fields. 970-974
  
• Cheng Chi Wang, Her-Terng Yau, Yen-Liang Yeh, Ming-Jyi Jang, Jing-Fung Lin:
  Influence of the bearing number on micro gas bearing system. 975-979
  
• Ru Zhang, Ying Zhang, Peilin Lang, Yuwen Duan:
  Research of nano-material doped fiber in SBS slow light system. 980-982
  
• Ping Peng, Tielin Shi, Guanglan Liao, Zirong Tang, Chang Liu:
  Scratch of submicron grooves on aluminum film with AFM diamond tip. 983-986
  
• Zhong Cao, Meng-Xue Zeng, Ling Zhang, Xi-Xi Huang, Ming-Xing Wang, Fu-Chun Gong, Shu-Zhen Tan:
  Novel optical nanobiosensor assembled with silver nanoparticles on gold surface. 987-990
  
• Shubin Yan, Baohua Wang, Yingzhan Yan, Nini Hao, Shaohui Wang, Xiaohong Ren, Xiongying Ye, Zhaoying Zhou, Chenyang Xue, Jun Liu:
  The analysis of microtoroid cavity coupling system based on fullwave. 991-995
  
• Yuwen Duan, Ru Zhang, Peilin Lang, Ying Zhang:
  Flat suppercontinuum generation in the inner cladding fiber with InP nano thin film. 996-999
  
• Xin Liu, Chenyang Xue, Shubin Yan, Jijun Xiong, Wendong Zhang:
  Integrated high sensitivity displacement sensor based on micro ring resonator. 1000-1003
  
• Karan K. Mehta, Ting-Hsiang Wu, Eric P. Y. Chiou:
  Magnetic nanowire-enhanced optomagnetic tweezers. 1004-1007
  
• Jun Liu, Guoqing Jiang, Shubin Yan, Shaohui Wang, Yingzhan Yan, Yanfeng Jing, Jijun Xiong, Xiongying Ye, Zhaoying Zhou, Wendong Zhang:
  Design of the miniature optical fiber voltage sensor. 1008-1012
  
• Jing Wan, Shao-Ren Deng, Yifang Chen, Ejaz Huq, Ran Liu, Xin-Ping Qu:
  Trilayer nanoimprint fabrication and simulation of the silicon nanowire sensor for gas detection. 1013-1016
  
• Min Nie, Pragnesh Patel, Kai Sun, Dennis Desheng Meng:
  Superhydrophilic anti-fog polyester film by oxygen plasma treatment. 1017-1020
  
• Ryan Lemmens, Dennis Desheng Meng:
  Wedging leakage flow and its impact on the maximum pressure head of bubble-driven micropumping. 1021-1025
  
• Wei Qin, Weizheng Yuan, Honglong Chang, Liang Xue, Guangmin Yuan:
  Fuzzy Adaptive Extended Kalman Filter for miniature Attitude and Heading Reference System. 1026-1030
  
• Liang Xue, Weizheng Yuan, Honglong Chang, Chengyu Jiang:
  MEMS-based multi-sensor integrated attitude estimation technology for MAV applications. 1031-1035
  
• Yung-Chiang Chung, Yen-Wen Hu, Tsong-Long Hwang, Po-Wen Chen, Fong-Jian Sie:
  Acting force comparison of microbeads and hemocytes in microchannel using optical tweezers system. 1036-1039
  
• Yu Zhang, Wen J. Li, Osamu Tabata:
  Extreme-low-power thermal convective accelerometer based on CNT sensing element. 1040-1042
  
• Peng Xiao, Wen J. Li, Ruxu Du:
  Experimental investigation of CNT-Based micro bubble generation inside microchannels. 1043-1047
  
• Li Yang, Mengxing Ouyang, Wen J. Li:
  Extreme-low power NaOCl sensor using EG-CNTs as Sensing Element. 1048-1053
  
• Jungil Park, Sunyoung Ahn, Youngmi Kim Pak, James Jungho Pak:
  2 . 1054-1057
  
• Kang Wu, Xiongying Ye, Feng Chen, Litao Liu, Linrui Guo, Zhaoying Zhou:
  Micromachined interferometric accelerometer fabricated using SGADER process. 1058-1061
  
• Jin-Woo Kim, Hyung-Mo Moon, Steve Tung, Hyun-Ho Lee:
  Highly effective bacterial removal system using carbon nanotube clusters. 1062-1064
  
• Ju Seok Lee, Joon Jin Song, Russell Deaton, Jin-Woo Kim:
  Exploring the potential of microarray technology for bio/nano sensing. 1065-1068
  
• Mi-Hyun Kang, Chang-Sin Park, Bo young Choi, Dong-Weon Lee:
  Fabrication of a stepped shape tip using a self-descending phenomena of meniscus. 1069-1072
  
• Jin Qiu, Shawn Cunningham, Arthur Morris:
  Effect of sacrificial layer compliance on thermal stresses of composite MEMS beams. 1073-1078
  
• Zhigang Wu, Grzegorz Wicher, Asa Fex Svenningsen, Klas Hjort:
  Microfluidic high viability separation of neural cells. 1079-1083
  
• Shu Long, Zhong Cao, Yu-Ting Zhao, Yi Zhou, Ming-Xing Wang, Yun-Lin Dai, Fu-Chun Gong, Shu-Zhen Tan:
  Multi-wall carbon nanotubes film used for determination of salbutamol sulfate. 1084-1087
  
• Guangmei Zhai, Hua Gong, Minqiang Wang, Zhonghai Lin, Kaiping Liu, Daoli Zhang:
  Low temperature growth of ZnO rods by EDTA-assisted hydrothermal synthesis. 1088-1091
  
• Chunrong Peng, Shanhong Xia:
  A novel micro-electrostatic field sensor based on parallel-plate resonator. 1092-1095
  
• Jialu Tang, Xiaowei Liu, Haifeng Zhang, Xilian Wang:
  Investigation of electrostatic bonding time model with point cathode. 1096-1098
  
• Hai-feng Zhang, Xiao-wei Liui, Xian-hui Shao, Xi-Lian Wang, Bin Zhou:
  The study of the improved wavelet thresholding with translation invariant de-noising on capillary electrophoresis signal. 1099-1102
  
• Jing Cui, Bingzhen Zhang, Jun Liu, Chengyang Xue, Guowen Liu, Xiaojuan Jia:
  Design of a novel sensor based on piezo-resistive effect of GaAs/AlGaAs/InGaAs PHEMT. 1103-1106
  
• Mingda Zhou, Yilong Hao, Chengchen Gao, Zhihong Li, Qifang Hu:
  Fabrication of complicated three dimensional structures utilizing multi-stack bonding. 1107-1111
  
• Jie Chen, Tao Guo, Hang Guo:
  Electron mobility in enhanced N-type silicon nanowire MOSFET. 1112-1116
  
• Jie Chen, Tao Guo, Hang Guo:
  Analysis of high frequency breakdown of noble gases in A MEMS-based Rb-87 lamp for miniaturized passive rubidium atomic clock. 1117-1119
  

Last update Sun May 19 23:19:21 2013 CET by the DBLP Team — Data released under the ODC-BY 1.0 license — See also our legal information page