 | 2008 |
|---|
| 74 |       | Ilia Polian,
Kohei Miyase,
Yusuke Nakamura,
Seiji Kajihara,
Piet Engelke,
Bernd Becker,
Stefan Spinner,
Xiaoqing Wen:
Diagnosis of Realistic Defects Based on the X-Fault Model.
DDECS 2008: 263-266 |
| 73 | | Kohei Miyase,
Kenji Noda,
Hideaki Ito,
Kazumi Hatayama,
Takashi Aikyo,
Yuta Yamato,
Hiroshi Furukawa,
Xiaoqing Wen,
Seiji Kajihara:
Effective IR-drop reduction in at-speed scan testing using Distribution-Controlling X-Identification.
ICCAD 2008: 52-58 |
| 72 | | Seiji Kajihara,
Michiko Inoue:
Special Section on Test and Verification of VLSIs.
IEICE Transactions 91-D(3): 640-641 (2008) |
| 71 | | Yuta Yamato,
Yusuke Nakamura,
Kohei Miyase,
Xiaoqing Wen,
Seiji Kajihara:
A Novel Per-Test Fault Diagnosis Method Based on the Extended X-Fault Model for Deep-Submicron LSI Circuits.
IEICE Transactions 91-D(3): 667-674 (2008) |
| 70 | | Kohei Miyase,
Kenta Terashima,
Xiaoqing Wen,
Seiji Kajihara,
Sudhakar M. Reddy:
On Detection of Bridge Defects with Stuck-at Tests.
IEICE Transactions 91-D(3): 683-689 (2008) |
| 69 | | Xiaoqing Wen,
Kohei Miyase,
Tatsuya Suzuki,
Seiji Kajihara,
Laung-Terng Wang,
Kewal K. Saluja,
Kozo Kinoshita:
Low Capture Switching Activity Test Generation for Reducing IR-Drop in At-Speed Scan Testing.
J. Electronic Testing 24(4): 379-391 (2008) |
| 2007 |
|---|
| 68 | | Xiaoqing Wen,
Kohei Miyase,
Tatsuya Suzuki,
Seiji Kajihara,
Yuji Ohsumi,
Kewal K. Saluja:
Critical-Path-Aware X-Filling for Effective IR-Drop Reduction in At-Speed Scan Testing.
DAC 2007: 527-532 |
| 67 | | Seiji Kajihara,
Shohei Morishima,
Masahiro Yamamoto,
Xiaoqing Wen,
Masayasu Fukunaga,
Kazumi Hatayama,
Takashi Aikyo:
Estimation of delay test quality and its application to test generation.
ICCAD 2007: 413-417 |
| 66 | | Xiaoqing Wen,
Seiji Kajihara,
Kohei Miyase,
Tatsuya Suzuki,
Kewal K. Saluja,
Laung-Terng Wang,
Kozo Kinoshita:
A Novel ATPG Method for Capture Power Reduction during Scan Testing.
IEICE Transactions 90-D(9): 1398-1405 (2007) |
| 2006 |
|---|
| 65 | | Masayasu Fukunaga,
Seiji Kajihara,
Xiaoqing Wen,
Toshiyuki Maeda,
Shuji Hamada,
Yasuo Sato:
A dynamic test compaction procedure for high-quality path delay testing.
ASP-DAC 2006: 348-353 |
| 64 | | Xiaoqing Wen,
Kohei Miyase,
Tatsuya Suzuki,
Yuta Yamato,
Seiji Kajihara,
Laung-Terng Wang,
Kewal K. Saluja:
Highly-Guided X-Filling Method for Effective Low-Capture-Power Scan Test Generation.
ICCD 2006 |
| 63 | | Xiaoqing Wen,
Seiji Kajihara,
Kohei Miyase,
Tatsuya Suzuki,
Kewal K. Saluja,
Laung-Terng Wang,
Khader S. Abdel-Hafez,
Kozo Kinoshita:
A New ATPG Method for Efficient Capture Power Reduction During Scan Testing.
VTS 2006: 58-65 |
| 62 | | Yasuo Sato,
Shuji Hamada,
Toshiyuki Maeda,
Atsuo Takatori,
Seiji Kajihara:
A Statistical Quality Model for Delay Testing.
IEICE Transactions 89-C(3): 349-355 (2006) |
| 61 | | Yoshinobu Higami,
Seiji Kajihara,
Irith Pomeranz,
Shin-ya Kobayashi,
Yuzo Takamatsu:
On Finding Don't Cares in Test Sequences for Sequential Circuits.
IEICE Transactions 89-D(11): 2748-2755 (2006) |
| 60 | | Xiaoqing Wen,
Seiji Kajihara,
Kohei Miyase,
Yuta Yamato,
Kewal K. Saluja,
Laung-Terng Wang,
Kozo Kinoshita:
A Per-Test Fault Diagnosis Method Based on the X-Fault Model.
IEICE Transactions 89-D(11): 2756-2765 (2006) |
| 59 | | Xiaoqing Wen,
Yoshiyuki Yamashita,
Seiji Kajihara,
Laung-Terng Wang,
Kewal K. Saluja,
Kozo Kinoshita:
A New Method for Low-Capture-Power Test Generation for Scan Testing.
IEICE Transactions 89-D(5): 1679-1686 (2006) |
| 2005 |
|---|
| 58 | | Yasuo Sato,
Shuji Hamada,
Toshiyuki Maeda,
Atsuo Takatori,
Seiji Kajihara:
Evaluation of the statistical delay quality model.
ASP-DAC 2005: 305-310 |
| 57 | | Yasumi Doi,
Seiji Kajihara,
Xiaoqing Wen,
Lei Li,
Krishnendu Chakrabarty:
Test compression for scan circuits using scan polarity adjustment and pinpoint test relaxation.
ASP-DAC 2005: 59-64 |
| 56 | | Kohei Miyase,
Kenta Terashima,
Seiji Kajihara,
Xiaoqing Wen,
Sudhakar M. Reddy:
On Improving Defect Coverage of Stuck-at Fault Tests.
Asian Test Symposium 2005: 216-223 |
| 55 | | Seiji Kajihara,
Masayasu Fukunaga,
Xiaoqing Wen,
Toshiyuki Maeda,
Shuji Hamada,
Yasuo Sato:
Path delay test compaction with process variation tolerance.
DAC 2005: 845-850 |
| 54 | | Lei Li,
Krishnendu Chakrabarty,
Seiji Kajihara,
Shivakumar Swaminathan:
Efficient Space/Time Compression to Reduce Test Data Volume and Testing Time for IP Cores.
VLSI Design 2005: 53-58 |
| 53 | | Xiaoqing Wen,
Yoshiyuki Yamashita,
Seiji Kajihara,
Laung-Terng Wang,
Kewal K. Saluja,
Kozo Kinoshita:
On Low-Capture-Power Test Generation for Scan Testing.
VTS 2005: 265-270 |
| 52 | | Xiaoqing Wen,
Seiji Kajihara,
Hideo Tamamoto,
Kewal K. Saluja,
Kozo Kinoshita:
On Design for IDDQ-Based Diagnosability of CMOS Circuits Using Multiple Power Supplies.
IEICE Transactions 88-D(4): 703-710 (2005) |
| 51 | | Masayasu Fukunaga,
Seiji Kajihara,
Sadami Takeoka:
On Statistical Estimation of Fault Efficiency for Path Delay Faults Based on Untestable Path Analysis.
IEICE Transactions 88-D(7): 1671-1677 (2005) |
| 50 | | Xiaoqing Wen,
Tatsuya Suzuki,
Seiji Kajihara,
Kohei Miyase,
Yoshihiro Minamoto,
Laung-Terng Wang,
Kewal K. Saluja:
Efficient Test Set Modification for Capture Power Reduction.
J. Low Power Electronics 1(3): 319-330 (2005) |
| 49 | | Yoshinobu Higami,
Seiji Kajihara,
Hideyuki Ichihara,
Yuzo Takamatsu:
Test cost reduction for logic circuits: Reduction of test data volume and test application time.
Systems and Computers in Japan 36(6): 69-83 (2005) |
| 2004 |
|---|
| 48 | | Yoshinobu Higami,
Seiji Kajihara,
Shin-ya Kobayashi,
Yuzo Takamatsu:
Techniques for Finding Xs in Test Sequences for Sequential Circuits and Applications to Test Length/Power Reduction.
Asian Test Symposium 2004: 46-49 |
| 47 | | Kohei Miyase,
Seiji Kajihara,
Sudhakar M. Reddy:
Multiple Scan Tree Design with Test Vector Modification.
Asian Test Symposium 2004: 76-81 |
| 46 | | Xiaoqing Wen,
Tokiharu Miyoshi,
Seiji Kajihara,
Laung-Terng Wang,
Kewal K. Saluja,
Kozo Kinoshita:
On per-test fault diagnosis using the X-fault model.
ICCAD 2004: 633-640 |
| 45 | | Dong Hyun Baik,
Kewal K. Saluja,
Seiji Kajihara:
Random Access Scan: A solution to test power, test data volume and test time.
VLSI Design 2004: 883-888 |
| 44 | | Kohei Miyase,
Seiji Kajihara:
XID: Don't care identification of test patterns for combinational circuits.
IEEE Trans. on CAD of Integrated Circuits and Systems 23(2): 321-326 (2004) |
| 2003 |
|---|
| 43 | | Kohei Miyase,
Seiji Kajihara:
Optimal Scan Tree Construction with Test Vector Modification for Test Compression.
Asian Test Symposium 2003: 136-141 |
| 42 | | Masayasu Fukunaga,
Seiji Kajihara,
Sadami Takeoka:
On Estimation of Fault Efficiency for Path Delay Faults.
Asian Test Symposium 2003: 64-67 |
| 41 | | Seiji Kajihara,
Yasumi Doi,
Lei Li,
Krishnendu Chakrabarty:
On Combining Pinpoint Test Set Relaxation and Run-Length Codes for Reducing Test Data Volume.
ICCD 2003: 387-396 |
| 40 | | Yoshinobu Higami,
Shin-ya Kobayashi,
Yuzo Takamatsu,
Seiji Kajihara,
Irith Pomeranz:
A Method to Find Don't Care Values in Test Sequences for Sequential Circuits.
ICCD 2003: 397- |
| 39 | | Sudhakar M. Reddy,
Kohei Miyase,
Seiji Kajihara,
Irith Pomeranz:
On test data volume reduction for multiple scan chain designs.
ACM Trans. Design Autom. Electr. Syst. 8(4): 460-469 (2003) |
| 38 | | Yun Shao,
Sudhakar M. Reddy,
Irith Pomeranz,
Seiji Kajihara:
On Selecting Testable Paths in Scan Designs.
J. Electronic Testing 19(4): 447-456 (2003) |
| 37 | | Takeshi Asakawa,
Kazuhiko Iwasaki,
Seiji Kajihara:
BIST-oriented test pattern generator for detection of transition faults.
Systems and Computers in Japan 34(3): 76-84 (2003) |
| 2002 |
|---|
| 36 | | Seiji Kajihara,
Kenjiro Taniguchi,
Kohei Miyase,
Irith Pomeranz,
Sudhakar M. Reddy:
Test Data Compression Using Don?t-Care Identification and Statistical Encoding.
Asian Test Symposium 2002: 67- |
| 35 | | Kohei Miyase,
Seiji Kajihara,
Sudhakar M. Reddy:
A Method of Static Test Compaction Based on Don't Care Identification.
DELTA 2002: 392-395 |
| 34 | | Seiji Kajihara,
Kenjiro Taniguchi,
Irith Pomeranz,
Sudhakar M. Reddy:
Test Data Compression Using Don't-Care Identification and Statistical Encoding.
DELTA 2002: 413-416 |
| 33 | | Kohei Miyase,
Seiji Kajihara,
Irith Pomeranz,
Sudhakar M. Reddy:
Don't-Care Identification on Specific Bits of Test Patterns.
ICCD 2002: 194-199 |
| 32 | | Sudhakar M. Reddy,
Irith Pomeranz,
Huaxing Tang,
Seiji Kajihara,
Kozo Kinoshita:
On Testing of Interconnect Open Defects in Combinational Logic Circuits with Stems of Large Fanout.
ITC 2002: 83-89 |
| 31 | | Sudhakar M. Reddy,
Kohei Miyase,
Seiji Kajihara,
Irith Pomeranz:
On Test Data Volume Reduction for Multiple Scan Chain Designs.
VTS 2002: 103-110 |
| 30 | | Seiji Kajihara,
Koji Ishida,
Kohei Miyase:
Test Vector Modification for Power Reduction during Scan Testing.
VTS 2002: 160-165 |
| 2001 |
|---|
| 29 | | Yun Shao,
Sudhakar M. Reddy,
Seiji Kajihara,
Irith Pomeranz:
An Efficient Method to Identify Untestable Path Delay Faults.
Asian Test Symposium 2001: 233-238 |
| 28 | | Kenichi Ichino,
Takeshi Asakawa,
Satoshi Fukumoto,
Kazuhiko Iwasaki,
Seiji Kajihara:
Hybrid BIST Using Partially Rotational Scan.
Asian Test Symposium 2001: 379-384 |
| 27 | | Seiji Kajihara,
Kohei Miyase:
On Identifying Don't Care Inputs of Test Patterns for Combinational Circuits.
ICCAD 2001: 364-369 |
| 2000 |
|---|
| 26 | | Seiji Kajihara,
Takashi Shimono,
Irith Pomeranz,
Sudhakar M. Reddy:
Enhanced untestable path analysis using edge graphs.
Asian Test Symposium 2000: 139-144 |
| 25 |  | Sudhakar M. Reddy,
Irith Pomeranz,
Seiji Kajihara,
Atsushi Murakami,
Sadami Takeoka,
Mitsuyasu Ohta:
On validating data hold times for flip-flops in sequential circuits.
ITC 2000: 317-325 |
| 24 | | Atsushi Murakami,
Seiji Kajihara,
Tsutomu Sasao,
Irith Pomeranz,
Sudhakar M. Reddy:
Selection of potentially testable path delay faults for test generation.
ITC 2000: 376-384 |
| 1999 |
|---|
| 23 | | Hideyuki Ichihara,
Kozo Kinoshita,
Seiji Kajihara:
On an Effective Selection of IDDQ Measurement Vectors for Sequential Circuits.
Asian Test Symposium 1999: 147-152 |
| 22 | | Seiji Kajihara,
Atsushi Murakami,
Tomohisa Kaneko:
On Compact Test Sets for Multiple Stuck-at Faults for Large Circuits.
Asian Test Symposium 1999: 20-24 |
| 21 | | Hideyuki Ichihara,
Kozo Kinoshita,
Seiji Kajihara:
On Test Generation with A Limited Number of Tests.
Great Lakes Symposium on VLSI 1999: 12-15 |
| 1998 |
|---|
| 20 | | Hideyuki Ichihara,
Seiji Kajihara,
Kozo Kinoshita:
An Efficient Procedure for Obtaining Implication Relations and Its Application to Redundancy Identification.
Asian Test Symposium 1998: 58-63 |
| 19 | | Seiji Kajihara,
Kewal K. Saluja:
On Test Pattern Compaction Using Random Pattern Fault Simulation.
VLSI Design 1998: 464-469 |
| 1997 |
|---|
| 18 | | Seiji Kajihara,
Tsutomu Sasao:
On the Adders with Minimum Tests.
Asian Test Symposium 1997: 10-15 |
| 17 | | Seiji Kajihara,
Kozo Kinoshita,
Irith Pomeranz,
Sudhakar M. Reddy:
A Method for Identifying Robust Dependent and Functionally Unsensitizable Paths.
VLSI Design 1997: 82-87 |
| 16 | | Sudhakar M. Reddy,
Irith Pomeranz,
Seiji Kajihara:
Compact test sets for high defect coverage.
IEEE Trans. on CAD of Integrated Circuits and Systems 16(8): 923-930 (1997) |
| 15 | | Hiroyuki Yotsuyanagi,
Seiji Kajihara,
Kozo Kinoshita:
Synthesis of Sequential Circuits by Redundancy Removal and Retiming.
J. Electronic Testing 11(1): 81-92 (1997) |
| 14 | | Atsushi Yoshikawa,
Seiji Kajihara,
Masahiro Numa,
Kozo Kinoshita:
A diagnosis method for single logic design errors in gate-level combinational circuits.
Systems and Computers in Japan 28(6): 30-39 (1997) |
| 13 | | Hideyuki Ichihara,
Kozo Kinoshita,
Seiji Kajihara:
On invariant implication relations for removing partial circuits.
Systems and Computers in Japan 28(7): 39-47 (1997) |
| 1996 |
|---|
| 12 | | Yoshinobu Higami,
Seiji Kajihara,
Kozo Kinoshita:
Partially Parallel Scan Chain for Test Length Reduction by Using Retiming Technique.
Asian Test Symposium 1996: 94-99 |
| 11 | | Sudhakar M. Reddy,
Irith Pomeranz,
Seiji Kajihara:
On the effects of test compaction on defect coverage.
VTS 1996: 430-437 |
| 1995 |
|---|
| 10 | | Yoshinobu Higami,
Seiji Kajihara,
Kozo Kinoshita:
Test sequence compaction by reduced scan shift and retiming.
Asian Test Symposium 1995: 169-175 |
| 9 | | Hiroyuki Yotsuyanagi,
Seiji Kajihara,
Kozo Kinoshita:
Synthesis for Testability by Sequential Redundancy Removal Using Retiming.
FTCS 1995: 33-40 |
| 8 | | Hiroyuki Yotsuyanagi,
Seiji Kajihara,
Kozo Kinoshita:
Resynthesis for sequential circuits designed with a specified initial state.
VTS 1995: 152-157 |
| 7 | | Remata S. Reddy,
Irith Pomeranz,
Sudhakar M. Reddy,
Seiji Kajihara:
Compact test generation for bridging faults under I/sub DDQ/ testing.
VTS 1995: 310-316 |
| 6 | | Seiji Kajihara,
Irith Pomeranz,
Kozo Kinoshita,
Sudhakar M. Reddy:
Cost-effective generation of minimal test sets for stuck-at faults in combinational logic circuits.
IEEE Trans. on CAD of Integrated Circuits and Systems 14(12): 1496-1504 (1995) |
| 5 | | Yoshinobu Higami,
Seiji Kajihara,
Kozo Kinoshita:
Partial scan design and test sequence generation based on reduced scan shift method.
J. Electronic Testing 7(1-2): 115-124 (1995) |
| 1994 |
|---|
| 4 | | Yoshinobu Higami,
Seiji Kajihara,
Kozo Kinoshita:
Reduced Scan Shift: A New Testing Method for Sequential Circuit.
ITC 1994: 624-630 |
| 1993 |
|---|
| 3 | | Seiji Kajihara,
Irith Pomeranz,
Kozo Kinoshita,
Sudhakar M. Reddy:
Cost-Effective Generation of Minimal Test Sets for Stuck-at Faults in Combinational Logic Circuits.
DAC 1993: 102-106 |
| 2 | | Seiji Kajihara,
Tetsuji Sumioka,
Kozo Kinoshita:
Test generation for multiple faults based on parallel vector pair analysis.
ICCAD 1993: 436-439 |
| 1992 |
|---|
| 1 | | Seiji Kajihara,
Haruko Shiba,
Kozo Kinoshita:
Removal of Redundancy in Logic Circuits under Classification of Undetectable Faults.
FTCS 1992: 263-270 |
