D. F. Wong
List of publications from the DBLP Bibliography Server - FAQ
| 2009 | ||
|---|---|---|
| 275 | Lijuan Luo, Martin D. F. Wong: On using SAT to ordered escape problems. ASP-DAC 2009: 594-599 | |
| 274 | Hui Kong, Tan Yan, Martin D. F. Wong: Automatic bus planner for dense PCBs. DAC 2009: 326-331 | |
| 273 | Tan Yan, Martin D. F. Wong: A correct network flow model for escape routing. DAC 2009: 332-335 | |
| 272 | Jia-Wei Fang, Martin D. F. Wong, Yao-Wen Chang: Flip-chip routing with unified area-I/O pad assignments for package-board co-design. DAC 2009: 336-339 | |
| 271 | Po-Hung Lin, Hongbo Zhang, Martin D. F. Wong, Yao-Wen Chang: Thermal-driven analog placement considering device matching. DAC 2009: 593-598 | |
| 270 | Hongbo Zhang, Martin D. F. Wong, Kai-Yuan Chao, Liang Deng: Wire shaping is practical. ISPD 2009: 131-138 | |
| 269 | Quang Dinh, Deming Chen, Martin D. F. Wong: A routing approach to reduce glitches in low power FPGAs. ISPD 2009: 99-106 | |
| 268 | Tan Yan, Martin D. F. Wong: Theories and algorithms on single-detour routing for untangling twisted bus. ACM Trans. Design Autom. Electr. Syst. 14(3): (2009) | |
| 267 | Huaizhi Wu, Martin D. F. Wong: Incremental Improvement of Voltage Assignment. IEEE Trans. on CAD of Integrated Circuits and Systems 28(2): 217-230 (2009) | |
| 266 | Muhammet Mustafa Ozdal, Martin D. F. Wong: Archer: A History-Based Global Routing Algorithm. IEEE Trans. on CAD of Integrated Circuits and Systems 28(4): 528-540 (2009) | |
| 2008 | ||
| 265 | Lijuan Luo, Martin D. F. Wong: Ordered escape routing based on Boolean satisfiability. ASP-DAC 2008: 244-249 | |
| 264 | Quang Dinh, Deming Chen, Martin D. F. Wong: Efficient ASIP design for configurable processors with fine-grained resource sharing. FPGA 2008: 99-106 | |
| 263 | Tan Yan, Martin D. F. Wong: BSG-Route: a length-matching router for general topology. ICCAD 2008: 499-505 | |
| 262 | Yu Zhong, Martin D. F. Wong: Thermal-Aware IR Drop Analysis in Large Power Grid. ISQED 2008: 194-199 | |
| 261 | Hannah Honghua Yang, Martin D. F. Wong: Circuit Partitioning: A Network-Flow-Based Balanced Min-Cut Approach. Encyclopedia of Algorithms 2008 | |
| 260 | Lei Cheng, Deming Chen, Martin D. F. Wong: A fast simultaneous input vector generation and gate replacement algorithm for leakage power reduction. ACM Trans. Design Autom. Electr. Syst. 13(2): (2008) | |
| 259 | Huaizhi Wu, Martin D. F. Wong, Wilsin Gosti: Postplacement voltage assignment under performance constraints. ACM Trans. Design Autom. Electr. Syst. 13(3): (2008) | |
| 258 | Muhammet Mustafa Ozdal, Martin D. F. Wong, Philip S. Honsinger: Optimal routing algorithms for rectilinear pin clusters in high-density multichip modules. ACM Trans. Design Autom. Electr. Syst. 13(4): (2008) | |
| 257 | Muhammet Mustafa Ozdal, Martin D. F. Wong, Philip S. Honsinger: Simultaneous Escape-Routing Algorithms for Via Minimization of High-Speed Boards. IEEE Trans. on CAD of Integrated Circuits and Systems 27(1): 84-95 (2008) | |
| 256 | Hua Xiang, Kai-Yuan Chao, Ruchir Puri, Martin D. F. Wong: Is Your Layout-Density Verification Exact? - A Fast Exact Deep Submicrometer Density Calculation Algorithm. IEEE Trans. on CAD of Integrated Circuits and Systems 27(4): 621-632 (2008) | |
| 255 | Hua Xiang, Liang Deng, Ruchir Puri, Kai-Yuan Chao, Martin D. F. Wong: Fast Dummy-Fill Density Analysis With Coupling Constraints. IEEE Trans. on CAD of Integrated Circuits and Systems 27(4): 633-642 (2008) | |
| 254 | Lei Cheng, Deming Chen, Martin D. F. Wong: DDBDD: Delay-Driven BDD Synthesis for FPGAs. IEEE Trans. on CAD of Integrated Circuits and Systems 27(7): 1203-1213 (2008) | |
| 2007 | ||
| 253 | Liang Deng, Martin D. F. Wong, Kai-Yuan Chao, Hua Xiang: Coupling-aware Dummy Metal Insertion for Lithography. ASP-DAC 2007: 13-18 | |
| 252 | David M. Pawlowski, Liang Deng, Martin D. F. Wong: Fast and Accurate OPC for Standard-Cell Layouts. ASP-DAC 2007: 7-12 | |
| 251 | Yu Zhong, Martin D. F. Wong: Fast Placement Optimization of Power Supply Pads. ASP-DAC 2007: 763-767 | |
| 250 | Yu Zhong, Martin D. F. Wong: Efficient Second-Order Iterative Methods for IR Drop Analysis in Power Grid. ASP-DAC 2007: 768-773 | |
| 249 | Lei Cheng, Deming Chen, Martin D. F. Wong: GlitchMap: An FPGA Technology Mapper for Low Power Considering Glitches. DAC 2007: 318-323 | |
| 248 | Huaizhi Wu, Martin D. F. Wong: Improving Voltage Assignment by Outlier Detection and Incremental Placement. DAC 2007: 459-464 | |
| 247 | Lei Cheng, Deming Chen, Martin D. F. Wong: DDBDD: Delay-Driven BDD Synthesis for FPGAs. DAC 2007: 910-915 | |
| 246 | Lei Cheng, Deming Chen, Martin D. F. Wong, Mike Hutton, Jason Govig: Timing constraint-driven technology mapping for FPGAs considering false paths and multi-clock domains. ICCAD 2007: 370-375 | |
| 245 | Hui Kong, Tan Yan, Martin D. F. Wong, Muhammet Mustafa Ozdal: Optimal bus sequencing for escape routing in dense PCBs. ICCAD 2007: 390-395 | |
| 244 | Tan Yan, Martin D. F. Wong: Untangling twisted nets for bus routing. ICCAD 2007: 396-400 | |
| 243 | Muhammet Mustafa Ozdal, Martin D. F. Wong: Archer: a history-driven global routing algorithm. ICCAD 2007: 488-495 | |
| 242 | Hua Xiang, Kai-Yuan Chao, Ruchir Puri, Martin D. F. Wong: Is your layout density verification exact?: a fast exact algorithm for density calculation. ISPD 2007: 19-26 | |
| 241 | Hua Xiang, Liang Deng, Ruchir Puri, Kai-Yuan Chao, Martin D. F. Wong: Dummy fill density analysis with coupling constraints. ISPD 2007: 3-10 | |
| 240 | Hua Xiang, Liang Deng, Li-Da Huang, Martin D. F. Wong: OPC-Friendly Bus Driven Floorplanning. ISQED 2007: 847-852 | |
| 239 | Huaizhi Wu, Martin D. F. Wong, I-Min Liu, Yusu Wang: Placement-Proximity-Based Voltage Island Grouping Under Performance Requirement. IEEE Trans. on CAD of Integrated Circuits and Systems 26(7): 1256-1269 (2007) | |
| 2006 | ||
| 238 | Sebastian Vogel, Martin D. F. Wong: Closed form solution for optimal buffer sizing using the Weierstrass elliptic function. ASP-DAC 2006: 315-319 | |
| 237 | Liang Deng, Martin D. F. Wong: An exact algorithm for the statistical shortest path problem. ASP-DAC 2006: 965-970 | |
| 236 | Lei Cheng, Liang Deng, Deming Chen, Martin D. F. Wong: A fast simultaneous input vector generation and gate replacement algorithm for leakage power reduction. DAC 2006: 117-120 | |
| 235 | Huaizhi Wu, Martin D. F. Wong, I-Min Liu: Timing-constrained and voltage-island-aware voltage assignment. DAC 2006: 429-432 | |
| 234 | Muhammet Mustafa Ozdal, Martin D. F. Wong: Two-layer bus routing for high-speed printed circuit boards. ACM Trans. Design Autom. Electr. Syst. 11(1): 213-227 (2006) | |
| 233 | Hung-Ming Chen, I-Min Liu, Martin D. F. Wong: I/O Clustering in Design Cost and Performance Optimization for Flip-Chip Design. IEEE Trans. on CAD of Integrated Circuits and Systems 25(11): 2552-2556 (2006) | |
| 232 | Muhammet Mustafa Ozdal, Martin D. F. Wong: A Length-Matching Routing Algorithm for High-Performance Printed Circuit Boards. IEEE Trans. on CAD of Integrated Circuits and Systems 25(12): 2784-2794 (2006) | |
| 231 | Lei Cheng, Martin D. F. Wong: Floorplan Design for Multimillion Gate FPGAs. IEEE Trans. on CAD of Integrated Circuits and Systems 25(12): 2795-2805 (2006) | |
| 230 | Muhammet Mustafa Ozdal, Martin D. F. Wong: Algorithmic study of single-layer bus routing for high-speed boards. IEEE Trans. on CAD of Integrated Circuits and Systems 25(3): 490-503 (2006) | |
| 229 | Muhammet Mustafa Ozdal, Martin D. F. Wong: Algorithms for simultaneous escape routing and Layer assignment of dense PCBs. IEEE Trans. on CAD of Integrated Circuits and Systems 25(8): 1510-1522 (2006) | |
| 228 | Xiaoping Tang, Ruiqi Tian, Martin D. F. Wong: Minimizing wire length in floorplanning. IEEE Trans. on CAD of Integrated Circuits and Systems 25(9): 1744-1753 (2006) | |
| 227 | Hua Xiang, Kai-Yuan Chao, Martin D. F. Wong: An ECO routing algorithm for eliminating coupling-capacitance violations. IEEE Trans. on CAD of Integrated Circuits and Systems 25(9): 1754-1762 (2006) | |
| 2005 | ||
| 226 | Liang Deng, Martin D. F. Wong: Energy optimization in memory address bus structure for application-specific systems. ACM Great Lakes Symposium on VLSI 2005: 232-237 | |
| 225 | Gang Xu, Ruiqi Tian, David Z. Pan, Martin D. F. Wong: CMP aware shuttle mask floorplanning. ASP-DAC 2005: 1111-1114 | |
| 224 | Gang Xu, Li-Da Huang, David Z. Pan, Martin D. F. Wong: Redundant-via enhanced maze routing for yield improvement. ASP-DAC 2005: 1148-1151 | |
| 223 | Lei Cheng, Liang Deng, Martin D. F. Wong: Floorplanning for 3-D VLSI design. ASP-DAC 2005: 405-411 | |
| 222 | Xiaoping Tang, Ruiqi Tian, Martin D. F. Wong: Optimal redistribution of white space for wire length minimization. ASP-DAC 2005: 412-417 | |
| 221 | Yongseok Cheon, Martin D. F. Wong: Crowdedness-balanced multilevel partitioning for uniform resource utilization. ASP-DAC 2005: 418-423 | |
| 220 | Huaizhi Wu, I-Min Liu, Martin D. F. Wong, Yusu Wang: Post-placement voltage island generation under performance requirement. ICCAD 2005: 309-316 | |
| 219 | Liang Deng, Martin D. F. Wong: Buffer insertion under process variations for delay minimization. ICCAD 2005: 317-321 | |
| 218 | Yu Zhong, Martin D. F. Wong: Fast algorithms for IR drop analysis in large power grid. ICCAD 2005: 351-357 | |
| 217 | Muhammet Mustafa Ozdal, Martin D. F. Wong, Philip S. Honsinger: An escape routing framework for dense boards with high-speed design constraints. ICCAD 2005: 759-766 | |
| 216 | Muhammet Mustafa Ozdal, Martin D. F. Wong, Philip S. Honsinger: Optimal routing algorithms for pin clusters in high-density multichip modules. ICCAD 2005: 767-774 | |
| 215 | Hua Xiang, Kai-Yuan Chao, Martin D. F. Wong: Exact Algorithms for Coupling Capacitance Minimization by Adding One Metal Layer. ISQED 2005: 181-186 | |
| 214 | Muzhou Shao, Youxin Gao, Li-Pen Yuan, Hung-Ming Chen, Martin D. F. Wong: Current Calculation on VLSI Signal Interconnects. ISQED 2005: 580-585 | |
| 213 | Hua Xiang, I-Min Liu, Martin D. F. Wong: Wire Planning with Bounded Over-the-Block Wires. ISQED 2005: 622-627 | |
| 212 | Muzhou Shao, Youxin Gao, Li-Pen Yuan, Martin D. F. Wong: IR Drop and Ground Bounce Awareness Timing Model. ISVLSI 2005: 226-231 | |
| 211 | Hua Xiang, Xiaoping Tang, Martin D. F. Wong: An algorithm for integrated pin assignment and buffer planning. ACM Trans. Design Autom. Electr. Syst. 10(3): 561-572 (2005) | |
| 210 | Hung-Ming Chen, Li-Da Huang, I-Min Liu, Martin D. F. Wong: Simultaneous power supply planning and noise avoidance in floorplan design. IEEE Trans. on CAD of Integrated Circuits and Systems 24(4): 578-587 (2005) | |
| 2004 | ||
| 209 | Xiaoping Tang, Martin D. F. Wong: On handling arbitrary rectilinear shape constraint. ASP-DAC 2004: 38-41 | |
| 208 | Xiaoping Tang, Martin D. F. Wong: Tradeoff routing resource, runtime and quality in buffered routing. ASP-DAC 2004: 430-433 | |
| 207 | Li-Da Huang, Martin D. F. Wong: Optical proximity correction (OPC): friendly maze routing. DAC 2004: 186-191 | |
| 206 | Liang Deng, Martin D. F. Wong: Optimal Algorithm for Minimizing the Number of Twists in an On-Chip Bus. DATE 2004: 1104-1109 | |
| 205 | Lei Cheng, Martin D. F. Wong: Floorplan design for multi-million gate FPGAs. ICCAD 2004: 292-299 | |
| 204 | Muhammet Mustafa Ozdal, Martin D. F. Wong: Simultaneous escape routing and layer assignment for dense PCBs. ICCAD 2004: 822-829 | |
| 203 | Muhammet Mustafa Ozdal, Martin D. F. Wong: A provably good algorithm for high performance bus routing. ICCAD 2004: 830-837 | |
| 202 | Martin D. F. Wong: Reticle Floorplanning with Guaranteed Yield for Multi-Project Wafers. ICCD 2004: 106-110 | |
| 201 | Hung-Ming Chen, I-Min Liu, Martin D. F. Wong, Muzhou Shao, Li-Da Huang: I/O Clustering in Design Cost and Performance Optimization for Flip-Chip Design. ICCD 2004: 562-567 | |
| 200 | Muhammet Mustafa Ozdal, Martin D. F. Wong: A Two-Layer Bus Routing Algorithm for High-Speed Boards. ICCD 2004: 99-105 | |
| 199 | Esra Erdem, Martin D. F. Wong: Rectilinear Steiner Tree Construction Using Answer Set Programming. ICLP 2004: 386-399 | |
| 198 | Hua Xiang, Kai-Yuan Chao, D. F. Wong: An ECO algorithm for eliminating crosstalk violations. ISPD 2004: 41-46 | |
| 197 | Li-Da Huang, Xiaoping Tang, Hua Xiang, Martin D. F. Wong, I-Min Liu: A polynomial time-optimal diode insertion/routing algorithm for fixing antenna problem [IC layout]. IEEE Trans. on CAD of Integrated Circuits and Systems 23(1): 141-147 (2004) | |
| 196 | Hua Xiang, Xiaoping Tang, Martin D. F. Wong: Bus-driven floorplanning. IEEE Trans. on CAD of Integrated Circuits and Systems 23(11): 1522-1530 (2004) | |
| 2003 | ||
| 195 | John F. Croix, D. F. Wong: Blade and razor: cell and interconnect delay analysis using current-based models. DAC 2003: 386-389 | |
| 194 | Li-Da Huang, Hung-Ming Chen, D. F. Wong: Global Wire Bus Configuration with Minimum Delay Uncertainty. DATE 2003: 10050-10055 | |
| 193 | Seokjin Lee, Hua Xiang, D. F. Wong, Richard Y. Sun: Wire type assignment for FPGA routing. FPGA 2003: 61-67 | |
| 192 | Seokjin Lee, Yongseok Cheon, Martin D. F. Wong: A Min-Cost Flow Based Detailed Router for FPGAs. ICCAD 2003: 388-393 | |
| 191 | Muhammet Mustafa Ozdal, Martin D. F. Wong: Length-Matching Routing for High-Speed Printed Circuit Boards. ICCAD 2003: 394-400 | |
| 190 | Hua Xiang, Xiaoping Tang, Martin D. F. Wong: Bus-Driven Floorplanning. ICCAD 2003: 66-73 | |
| 189 | Yongseok Cheon, Seokjin Lee, Martin D. F. Wong: Stable Multiway Circuit Partitioning for ECO. ICCAD 2003: 718-725 | |
| 188 | Muzhou Shao, Martin D. F. Wong, Huijing Cao, Youxin Gao, Li-Pen Yuan, Li-Da Huang, Seokjin Lee: Explicit gate delay model for timing evaluation. ISPD 2003: 32-38 | |
| 187 | Yao-Wen Chang, Kai Zhu, Guang-Ming Wu, D. F. Wong, C. K. Wong: Analysis of FPGA/FPIC switch modules. ACM Trans. Design Autom. Electr. Syst. 8(1): 11-37 (2003) | |
| 186 | Li-Da Huang, Minghorng Lai, Martin D. F. Wong, Youxin Gao: Maze routing with buffer insertion under transition time constraints. IEEE Trans. on CAD of Integrated Circuits and Systems 22(1): 91-95 (2003) | |
| 185 | Yongseok Cheon, Martin D. F. Wong: Design hierarchy-guided multilevel circuit partitioning. IEEE Trans. on CAD of Integrated Circuits and Systems 22(4): 420-427 (2003) | |
| 184 | Seokjin Lee, Martin D. F. Wong: Timing-driven routing for FPGAs based on Lagrangian relaxation. IEEE Trans. on CAD of Integrated Circuits and Systems 22(4): 506-510 (2003) | |
| 183 | Hua Xiang, Xiaoping Tang, Martin D. F. Wong: Min-cost flow-based algorithm for simultaneous pin assignment and routing. IEEE Trans. on CAD of Integrated Circuits and Systems 22(7): 870-878 (2003) | |
| 2002 | ||
| 182 | Hua Xiang, D. F. Wong, Xiaoping Tang: An algorithm for integrated pin assignment and buffer planning. DAC 2002: 584-589 | |
| 181 | Xiaoping Tang, D. F. Wong: Floorplanning with alignment and performance constraints. DAC 2002: 848-853 | |
| 180 | Li-Da Huang, Xiaoping Tang, Hua Xiang, D. F. Wong, I-Min Liu: A Polynomial Time Optimal Diode Insertion/Routing Algorithm for Fixing Antenna Problem. DATE 2002: 470-477 | |
| 179 | Li-Da Huang, Minghorng Lai, D. F. Wong, Youxin Gao: Maze Routing with Buffer Insertion under Transition Time Constraints. DATE 2002: 702-707 | |
| 178 | K. K. Lee, D. F. Wong: Incremental reconfiguration of multi-FPGA systems. FPGA 2002: 206-213 | |
| 177 | Muzhou Shao, D. F. Wong, Youxin Gao, Li-Pen Yuan, Huijing Cao: Shaping interconnect for uniform current density. ICCAD 2002: 254-259 | |
| 176 | Ruiqi Tian, Ronggang Yu, Xiaoping Tang, D. F. Wong: On mask layout partitioning for electron projection lithography. ICCAD 2002: 514-518 | |
| 175 | Hua Xiang, Kai-Yuan Chao, D. F. Wong: ECO algorithms for removing overlaps between power rails and signal wires. ICCAD 2002: 67-74 | |
| 174 | Seokjin Lee, D. F. Wong: Timing-driven routing for FPGAs based on Lagrangian relaxation. ISPD 2002: 176-181 | |
| 173 | Yongseok Cheon, D. F. Wong: Design hierarchy guided multilevel circuit partitioning. ISPD 2002: 30-35 | |
| 172 | Ruiqi Tian, Xiaoping Tang, Martin D. F. Wong: Dummy-feature placement for chemical-mechanical polishinguniformity in a shallow-trench isolation process. IEEE Trans. on CAD of Integrated Circuits and Systems 21(1): 63-71 (2002) | |
| 171 | Minghorng Lai, Martin D. F. Wong: Maze routing with buffer insertion and wiresizing. IEEE Trans. on CAD of Integrated Circuits and Systems 21(10): 1205-1209 (2002) | |
| 2001 | ||
| 170 | Hung-Ming Chen, D. F. Wong, Wai-Kei Mak, Hannah Honghua Yang: Faster and more accurate wiring evaluation in interconnect-centric floorplanning. ACM Great Lakes Symposium on VLSI 2001: 62-67 | |
| 169 | Minghorng Lai, D. F. Wong: Memory-efficient interconnect optimization. ASP-DAC 2001: 198-202 | |
| 168 | Xiaoping Tang, D. F. Wong: FAST-SP: a fast algorithm for block placement based on sequence pair. ASP-DAC 2001: 521-526 | |
| 167 | Youxin Gao, D. F. Wong: A fast and accurate delay estimation method for buffered interconnects. ASP-DAC 2001: 533-538 | |
| 166 | I-Min Liu, Hung-Ming Chen, Tan-Li Chou, Adnan Aziz, D. F. Wong: Integrated power supply planning and floorplanning. ASP-DAC 2001: 589-594 | |
| 165 | Minghorng Lai, D. F. Wong: Slicing tree is a complete floorplan representation. DATE 2001: 228-232 | |
| 164 | Youxin Gao, D. F. Wong: A graph based algorithm for optimal buffer insertion under accurate delay models. DATE 2001: 535-539 | |
| 163 | K. K. Lee, D. F. Wong: LRoute: a delay minimal router for hierarchical CPLDs. FPGA 2001: 12-20 | |
| 162 | Hua Xiang, Xiaoping Tang, D. F. Wong: An Algorithm for Simultaneous Pin Assignment and Routing. ICCAD 2001: 232- | |
| 161 | Xiaoping Tang, Ruiqi Tian, Hua Xiang, D. F. Wong: A New Algorithm for Routing Tree Construction with Buffer Insertion and Wire Sizing under Obstacle Constraints. ICCAD 2001: 49-56 | |
| 160 | Ruiqi Tian, Xiaoping Tang, D. F. Wong: Dummy feature placement for chemical-mechanical polishing uniformity in a shallow trench isolation process. ISPD 2001: 118-123 | |
| 159 | Chris C. N. Chu, D. F. Wong: Closed form solutions to simultaneous buffer insertion/sizing and wire sizing. ACM Trans. Design Autom. Electr. Syst. 6(3): 343-371 (2001) | |
| 158 | Chris C. N. Chu, D. F. Wong: VLSI Circuit Performance Optimization by Geometric Programming. Annals OR 105(1-4): 37-60 (2001) | |
| 157 | Xiaoping Tang, Ruiqi Tian, Martin D. F. Wong: Fast evaluation of sequence pair in block placement by longestcommon subsequence computation. IEEE Trans. on CAD of Integrated Circuits and Systems 20(12): 1406-1413 (2001) | |
| 156 | Yao-Wen Chang, Jai-Ming Lin, Martin D. F. Wong: Matching-based algorithm for FPGA channel segmentation design. IEEE Trans. on CAD of Integrated Circuits and Systems 20(6): 784-791 (2001) | |
| 155 | Evangeline F. Y. Young, Martin D. F. Wong, Hannah Honghua Yang: On extending slicing floorplan to handle L/T-shaped modules andabutment constraints. IEEE Trans. on CAD of Integrated Circuits and Systems 20(6): 800-807 (2001) | |
| 154 | Ruiqi Tian, Martin D. F. Wong, Robert Boone: Model-based dummy feature placement for oxide chemical-mechanicalpolishing manufacturability. IEEE Trans. on CAD of Integrated Circuits and Systems 20(7): 902-910 (2001) | |
| 153 | Xiaoping Tang, D. F. Wong: Network flow based buffer planning. Integration 30(2): 143-155 (2001) | |
| 2000 | ||
| 152 | Esra Erdem, Vladimir Lifschitz, Martin D. F. Wong: Wire Routing and Satisfiability Planning. Computational Logic 2000: 822-836 | |
| 151 | Hai Zhou, D. F. Wong: Optimal low power X OR gate decomposition. DAC 2000: 104-107 | |
| 150 | Minghorng Lai, D. F. Wong: Maze routing with buffer insertion and wiresizing. DAC 2000: 374-378 | |
| 149 | Ruiqi Tian, D. F. Wong, Robert Boone: Model-based dummy feature placement for oxide chemical-mechanical polishing manufacturability. DAC 2000: 667-670 | |
| 148 | Xiaoping Tang, D. F. Wong, Ruiqi Tian: Fast Evaluation of Sequence Pair in Block Placement by Longest Common Subsequence Computation. DATE 2000: 106-111 | |
| 147 | I-Min Liu, Adnan Aziz, D. F. Wong: Meeting Delay Constraints in DSM by Minimal Repeater Insertion. DATE 2000: 436-440 | |
| 146 | Youxin Gao, D. F. Wong: Wire-Sizing for Delay Minimization and Ringing Control Using Transmission Line Model. DATE 2000: 512- | |
| 145 | Xiaoping Tang, D. F. Wong: Planning buffer locations by network flows. ISPD 2000: 180-185 | |
| 144 | I-Min Liu, Tan-Li Chou, Adnan Aziz, D. F. Wong: Zero-skew clock tree construction by simultaneous routing, wire sizing and buffer insertion. ISPD 2000: 33-38 | |
| 143 | Yao-Wen Chang, Kai Zhu, D. F. Wong: Timing-driven routing for symmetrical array-based FPGAs. ACM Trans. Design Autom. Electr. Syst. 5(3): 433-450 (2000) | |
| 142 | Martin D. F. Wong, Dwight D. Hill: Editorial. IEEE Trans. on CAD of Integrated Circuits and Systems 19(2): 173-174 (2000) | |
| 141 | Evangeline F. Y. Young, Martin D. F. Wong, Hannah Honghua Yang: Slicing floorplans with range constraint. IEEE Trans. on CAD of Integrated Circuits and Systems 19(2): 272-278 (2000) | |
| 140 | Hai Zhou, Martin D. F. Wong, I-Min Liu, Adnan Aziz: Simultaneous routing and buffer insertion with restrictions onbuffer locations. IEEE Trans. on CAD of Integrated Circuits and Systems 19(7): 819-824 (2000) | |
| 139 | Wai-Kei Mak, D. F. Wong: A fast hypergraph min-cut algorithm for circuit partitioning. Integration 30(1): 1-11 (2000) | |
| 1999 | ||
| 138 | Fung Yu Young, D. F. Wong: Slicing Floorplans with Boundary Constraint. ASP-DAC 1999: 17-20 | |
| 137 | Youxin Gao, D. F. Wong: Optimal Wire Shape with Consideration of Coupling Capacitance under Elmore Delay Model. ASP-DAC 1999: 217-220 | |
| 136 | Chung-Ping Chen, D. F. Wong: Error Bounded Padé Approximation via Bilinear Conformal Transformation. DAC 1999: 7-12 | |
| 135 | Hai Zhou, D. F. Wong, I-Min Liu, Adnan Aziz: Simultaneous Routing and Buffer Insertion with Restrictions on Buffer Locations. DAC 1999: 96-99 | |
| 134 | Huiqun Liu, D. F. Wong: Circuit Partitioning for Dynamically Reconfigurable FPGAs. FPGA 1999: 187-194 | |
| 133 | Hung-Ming Chen, Hai Zhou, Fung Yu Young, D. F. Wong, Hannah Honghua Yang, Naveed A. Sherwani: Integrated floorplanning and interconnect planning. ICCAD 1999: 354-357 | |
| 132 | Huiqun Liu, D. F. Wong: A graph theoretic optimal algorithm for schedule compression in time-multiplexed FPGA partitioning. ICCAD 1999: 400-405 | |
| 131 | Jacob White, Jacob Avidan, Abe Elfadel, D. F. Wong: Advances in transistor timing, simulation, and optimization (tutorial abstract). ICCAD 1999: 611 | |
| 130 | I-Min Liu, Adnan Aziz, D. F. Wong, Hai Zhou: An Efficient Buffer Insertion Algorithm for Large Networks Based on Lagrangian Relaxation. ICCD 1999: 210-215 | |
| 129 | K. K. Lee, D. F. Wong: An Exact Tree-Based Structural Technology Mapping Algorithm for Configurable Logic Blocks in FPGAs. ICCD 1999: 216-221 | |
| 128 | Wai-Kei Mak, D. F. Wong: A fast hypergraph minimum cut algorithm. ISCAS (6) 1999: 170-173 | |
| 127 | Fung Yu Young, D. F. Wong: Slicing floorplans with range constraint. ISPD 1999: 97-102 | |
| 126 | Hai Zhou, Martin D. F. Wong: Global routing with crosstalk constraints. IEEE Trans. on CAD of Integrated Circuits and Systems 18(11): 1683-1688 (1999) | |
| 125 | Youxin Gao, Martin D. F. Wong: Wire-sizing optimization with inductance consideration using transmission-line model. IEEE Trans. on CAD of Integrated Circuits and Systems 18(12): 1759-1767 (1999) | |
| 124 | Chris C. N. Chu, Martin D. F. Wong: Greedy wire-sizing is linear time. IEEE Trans. on CAD of Integrated Circuits and Systems 18(4): 398-405 (1999) | |
| 123 | Chris C. N. Chu, Martin D. F. Wong: A quadratic programming approach to simultaneous buffer insertion/sizing and wire sizing. IEEE Trans. on CAD of Integrated Circuits and Systems 18(6): 787-798 (1999) | |
| 122 | Chung-Ping Chen, Chris C. N. Chu, Martin D. F. Wong: Fast and exact simultaneous gate and wire sizing by Lagrangian relaxation. IEEE Trans. on CAD of Integrated Circuits and Systems 18(7): 1014-1025 (1999) | |
| 121 | Youxin Gao, Martin D. F. Wong: Optimal shape function for a bidirectional wire under Elmore delay model. IEEE Trans. on CAD of Integrated Circuits and Systems 18(7): 994-999 (1999) | |
| 120 | Chris C. N. Chu, Martin D. F. Wong: An efficient and optimal algorithm for simultaneous buffer and wire sizing. IEEE Trans. on CAD of Integrated Circuits and Systems 18(9): 1297-1304 (1999) | |
| 119 | Evangeline F. Y. Young, Martin D. F. Wong, Hannah Honghua Yang: Slicing floorplans with boundary constraints. IEEE Trans. on CAD of Integrated Circuits and Systems 18(9): 1385-1389 (1999) | |
| 118 | Youxin Gao, D. F. Wong: Shaping a VLSI wire to minimize Elmore delay with consideration of coupling capacitance. Integration 27(2): 165-178 (1999) | |
| 117 | Fung Yu Young, Chris C. N. Chu, D. F. Wong: Generation of Universal Series-Parallel Boolean Functions. J. ACM 46(3): 416-435 (1999) | |
| 1998 | ||
| 116 | Hai Zhou, D. F. Wong: Global Routing with Crosstalk Constraints. DAC 1998: 374-377 | |
| 115 | Madhukar R. Korupolu, K. K. Lee, D. F. Wong: Exact Tree-based FPGA Technology Mapping for Logic Blocks with Independent LUTs. DAC 1998: 708-711 | |
| 114 | Chris C. N. Chu, D. F. Wong: A Polynomial Time Optimal Algorithm for Simultaneous Buffer and Wire Sizing. DATE 1998: 479- | |
| 113 | Wai-Kei Mak, D. F. Wong: Performance-Driven Board-Level Routing for FPGA-Based Logic Emulation (Abstract). FPGA 1998: 260 | |
| 112 | Huiqun Liu, Kai Zhu, D. F. Wong: Circuit Partitioning with Complex Resource Constraints in FPGAs. FPGA 1998: 77-84 | |
| 111 | Fung Yu Young, D. F. Wong: Slicing floorplans with pre-placed modules. ICCAD 1998: 252-258 | |
| 110 | Yao-Wen Chang, Jai-Ming Lin, D. F. Wong: Graph matching-based algorithms for FPGA segmentation design. ICCAD 1998: 34-39 | |
| 109 | Huiqun Liu, D. F. Wong: Network flow based circuit partitioning for time-multiplexed FPGAs. ICCAD 1998: 497-504 | |
| 108 | Youxin Gao, D. F. Wong: Shaping a VLSI wire to minimize delay using transmission line model. ICCAD 1998: 611-616 | |
| 107 | Chung-Ping Chen, Chris C. N. Chu, D. F. Wong: Fast and exact simultaneous gate and wire sizing by Lagrangian relaxation. ICCAD 1998: 617-624 | |
| 106 | Chris C. N. Chu, D. F. Wong: Greedy wire-sizing is linear time. ISPD 1998: 39-44 | |
| 105 | Hai Zhou, D. F. Wong: Optimal river routing with crosstalk constraints. ACM Trans. Design Autom. Electr. Syst. 3(3): 496-514 (1998) | |
| 104 | Huiqun Liu, Martin D. F. Wong: Network-flow-based multiway partitioning with area and pin constraints. IEEE Trans. on CAD of Integrated Circuits and Systems 17(1): 50-59 (1998) | |
| 103 | Chris C. N. Chu, Martin D. F. Wong: A matrix synthesis approach to thermal placement. IEEE Trans. on CAD of Integrated Circuits and Systems 17(11): 1166-1174 (1998) | |
| 102 | Hannah Honghua Yang, Martin D. F. Wong: Optimal min-area min-cut replication in partitioned circuits. IEEE Trans. on CAD of Integrated Circuits and Systems 17(11): 1175-1183 (1998) | |
| 101 | Kai Zhu, Martin D. F. Wong: Switch bound allocation for maximizing routability in timing-driven routing of FPGA's. IEEE Trans. on CAD of Integrated Circuits and Systems 17(4): 316-323 (1998) | |
| 1997 | ||
| 100 | John F. Croix, D. F. Wong: A Fast And Accurate Technique To Optimize Characterization Tables For Logic Synthesis. DAC 1997: 337-340 | |
| 99 | Chung-Ping Chen, D. F. Wong: Optimal Wire-Sizing Function with Fringing Capacitance Consideration. DAC 1997: 604-607 | |
| 98 | Hai Zhou, D. F. Wong: An exact gate decomposition algorithm for low-power technology mapping. ICCAD 1997: 575-580 | |
| 97 | Chris C. N. Chu, D. F. Wong: A new approach to simultaneous buffer insertion and wire sizing. ICCAD 1997: 614-621 | |
| 96 | Youxin Gao, D. F. Wong: Optimal shape function for a bi-directional wire under Elmore delay model. ICCAD 1997: 622-627 | |
| 95 | Ashih D. Mehta, Yao-Ping Chen, Noel Menezes, D. F. Wong, Lawrence T. Pileggi: Clustering and Load Balancing for Buffered Clock Tree Synthesis. ICCD 1997: 217-223 | |
| 94 | Fung Yu Young, D. F. Wong: On the Construction of Universal Series-Parallel Functions for Logic Module Design. ICCD 1997: 482-488 | |
| 93 | Wai-Kei Mak, D. F. Wong: Channel Segmentation Design for Symmentrical FPGAs. ICCD 1997: 496-501 | |
| 92 | Hai Zhou, D. F. Wong: Crosstalk-Constrained Maze Routing Based on Lagrangian Relaxation. ICCD 1997: 628-633 | |
| 91 | Huiqun Liu, D. F. Wong: Network flow based multi-way partitioning with area and pin constraints. ISPD 1997: 12-17 | |
| 90 | Fung Yu Young, D. F. Wong: How good are slicing floorplans?. ISPD 1997: 144-149 | |
| 89 | Chris C. N. Chu, D. F. Wong: A matrix synthesis approach to thermal placement. ISPD 1997: 163-168 | |
| 88 | Chris C. N. Chu, D. F. Wong: Closed form solution to simultaneous buffer insertion/sizing and wire sizing. ISPD 1997: 192-197 | |
| 87 | Wai-Kei Mak, D. F. Wong: Board-level multiterminal net routing for FPGA-based logic emulation. ACM Trans. Design Autom. Electr. Syst. 2(2): 151-167 (1997) | |
| 86 | Shashidhar Thakur, Yao-Wen Chang, Martin D. F. Wong, S. Muthukrishnan: Algorithms for an FPGA switch module routing problem with application to global routing. IEEE Trans. on CAD of Integrated Circuits and Systems 16(1): 32-46 (1997) | |
| 85 | Wai-Kei Mak, Martin D. F. Wong: Minimum replication min-cut partitioning. IEEE Trans. on CAD of Integrated Circuits and Systems 16(10): 1221-1227 (1997) | |
| 84 | Wai-Kei Mak, Martin D. F. Wong: On optimal board-level routing for FPGA-based logic emulation. IEEE Trans. on CAD of Integrated Circuits and Systems 16(3): 282-289 (1997) | |
| 83 | Kai Zhu, Martin D. F. Wong: Clock skew minimization during FPGA placement. IEEE Trans. on CAD of Integrated Circuits and Systems 16(4): 376-385 (1997) | |
| 82 | T. W. Her, Martin D. F. Wong: Module implementation selection and its application to transistor placement. IEEE Trans. on CAD of Integrated Circuits and Systems 16(6): 645-651 (1997) | |
| 81 | Hannah Honghua Yang, Martin D. F. Wong: Circuit clustering for delay minimization under area and pin constraints. IEEE Trans. on CAD of Integrated Circuits and Systems 16(9): 976-986 (1997) | |
| 80 | F. Y. Young, D. F. Wong: How good are slicing floorplans? Integration 23(1): 61-73 (1997) | |
| 79 | Y. P. Chen, D. F. Wong: On retiming for FPGA logic module minimization. Integration 24(2): 135-145 (1997) | |
| 78 | Y. P. Chen, D. F. Wong: A graph theoretic approach to feed-through pin assignment. Integration 24(2): 147-158 (1997) | |
| 1996 | ||
| 77 | Shashidhar Thakur, D. F. Wong, Shankar Krishnamoorthy: Delay Minimal Decomposition of Multiplexers in Technology Mapping. DAC 1996: 254-257 | |
| 76 | Chung-Ping Chen, Yao-Wen Chang, D. F. Wong: Fast Performance-Driven Optimization for Buffered Clock Trees Based on Lagrangian Relaxation. DAC 1996: 405-408 | |
| 75 | Chung-Ping Chen, Yao-Ping Chen, D. F. Wong: Optimal Wire-Sizing Formular Under the Elmore Delay Model. DAC 1996: 487-490 | |
| 74 | Shashidhar Thakur, D. F. Wong: Universal Logic Modules for Series-Parallel Functions. FPGA 1996: 31-37 | |
| 73 | Yao-Wen Chang, D. F. Wong, C. K. Wong: Universal Switch-Module Design for Symmetric-Array-Based FPGAs. FPGA 1996: 80-86 | |
| 72 | Wai-Kei Mak, D. F. Wong: Minimum replication min-cut partitioning. ICCAD 1996: 205-210 | |
| 71 | Hai Zhou, D. F. Wong: An optimal algorithm for river routing with crosstalk constraints. ICCAD 1996: 310-315 | |
| 70 | Chung-Ping Chen, Hai Zhou, D. F. Wong: Optimal non-uniform wire-sizing under the Elmore delay model. ICCAD 1996: 38-43 | |
| 69 | Yung-Ming Fang, D. F. Wong: Multiplexor Network Generation in High Level Synthesis. ICCD 1996: 78- | |
| 68 | Shashidhar Thakur, D. F. Wong: Series-parallel functions and FPGA logic module design. ACM Trans. Design Autom. Electr. Syst. 1(1): 102-122 (1996) | |
| 67 | Yao-Wen Chang, D. F. Wong, C. K. Wong: Universal switch modules for FPGA design. ACM Trans. Design Autom. Electr. Syst. 1(1): 80-101 (1996) | |
| 66 | Hannah Honghua Yang, Martin D. F. Wong: Balanced partitioning. IEEE Trans. on CAD of Integrated Circuits and Systems 15(12): 1533-1540 (1996) | |
| 65 | Glenn G. Lai, Donald S. Fussell, Martin D. F. Wong: Hinted quad trees for VLSI geometry DRC based on efficient searching for neighbors. IEEE Trans. on CAD of Integrated Circuits and Systems 15(3): 317-324 (1996) | |
| 64 | Mohankumar Guruswamy, Martin D. F. Wong: Echelon: a multilayer detailed area router. IEEE Trans. on CAD of Integrated Circuits and Systems 15(9): 1126-1136 (1996) | |
| 1995 | ||
| 63 | Wai-Kei Mak, D. F. Wong: On Optimal Board-Level Routing for FPGA-Based Logic Emulation. DAC 1995: 552-556 | |
| 62 | Shashidhar Thakur, D. F. Wong: On Designing ULM-based FPGA Logic Modules. FPGA 1995: 3-9 | |
| 61 | Hannah Honghua Yang, D. F. Wong: New algorithms for min-cut replication in partitioned circuits. ICCAD 1995: 216-222 | |
| 60 | Wai-Kei Mak, D. F. Wong: Board-level multi-terminal net routing for FPGA-based logic emulation. ICCAD 1995: 339-344 | |
| 59 | Kai-Yuan Chao, D. F. Wong: Signal integrity optimization on the pad assignment for high-speed VLSI design. ICCAD 1995: 720-725 | |
| 58 | Kai-Yuan Chao, D. F. Wong: Thermal placement for high-performance multichip modules. ICCD 1995: 218-223 | |
| 57 | Yao-Wen Chang, D. F. Wong, C. K. Wong: FPGA global routing based on a new congestion metric. ICCD 1995: 372- | |
| 56 | Yao-Wen Chang, D. F. Wong, C. K. Wong: Design and analysis of FPGA/FPIC switch modules. ICCD 1995: 394-401 | |
| 55 | Shashidhar Thakur, D. F. Wong: Simultaneous area and delay minimum K-LUT mapping for K-exact networks. ICCD 1995: 402-408 | |
| 54 | Yao-Ping Chen, D. F. Wong: A Graph Theoretic Approach to Feed-Through Pin Assignment. ISCAS 1995: 1687-1690 | |
| 53 | Shashidhar Thakur, Kai-Yuan Chao, D. F. Wong: An Optimal Layer Assignment Algorithm for Minimizing Crosstalk for Three Layer VHV Channel Routing. ISCAS 1995: 207-210 | |
| 52 | Kai-Yuan Chao, D. F. Wong: Floorplanning for Low Power Designs. ISCAS 1995: 45-48 | |
| 51 | Rajmohan Rajaraman, Martin D. F. Wong: Optimum clustering for delay minimization. IEEE Trans. on CAD of Integrated Circuits and Systems 14(12): 1490-1495 (1995) | |
| 50 | Ting-Chi Wang, Martin D. F. Wong, Yachyang Sun, Chak-Kuen Wong: Optimal net assignment. IEEE Trans. on CAD of Integrated Circuits and Systems 14(2): 265-269 (1995) | |
| 49 | T. W. Her, Martin D. F. Wong: On over-the-cell channel routing with cell orientations consideration. IEEE Trans. on CAD of Integrated Circuits and Systems 14(6): 766-772 (1995) | |
| 48 | T. W. Her, Ting-Chi Wang, Martin D. F. Wong: Performance-driven channel pin assignment algorithms. IEEE Trans. on CAD of Integrated Circuits and Systems 14(7): 849-857 (1995) | |
| 1994 | ||
| 47 | Kai Zhu, D. F. Wong: Switch Bound Allocation for Maximizing Routability in Timing-Driven Routing of FPGAs. DAC 1994: 165-170 | |
| 46 | Kai Zhu, D. F. Wong: Clock Skew Minimization During FPGA Placement. DAC 1994: 232-237 | |
| 45 | Shashidhar Thakur, D. F. Wong, S. Muthukrishnan: Algorithms for a switch module routing problem. EURO-DAC 1994: 265-270 | |
| 44 | Hannah Honghua Yang, D. F. Wong: Edge-map: optimal performance driven technology mapping for iterative LUT based FPGA designs. ICCAD 1994: 150-155 | |
| 43 | Yung-Ming Fang, D. F. Wong: Simultaneous functional-unit binding and floorplanning. ICCAD 1994: 317-321 | |
| 42 | Yao-Wen Chang, Shashidhar Thakur, Kai Zhu, D. F. Wong: A new global routing algorithm for FPGAs. ICCAD 1994: 356-361 | |
| 41 | Honghua Yang, D. F. Wong: Efficient network flow based min-cut balanced partitioning. ICCAD 1994: 50-55 | |
| 40 | Kai-Yuan Chao, D. F. Wong: Layer assignment for high-performance multi-chip modules. ICCAD 1994: 680-685 | |
| 39 | Yao-Ping Chen, D. F. Wong: On Retiming for FPGA Logic Module Minimization. ICCD 1994: 394-397 | |
| 38 | T. W. Her, D. F. Wong: Over-the-Cell Routing with Cell Orientations Consideration. ISCAS 1994: 471-474 | |
| 37 | Yang Cai, Martin D. F. Wong: On shifting blocks and terminals to minimize channel density. IEEE Trans. on CAD of Integrated Circuits and Systems 13(2): 178-186 (1994) | |
| 1993 | ||
| 36 | Rajmohan Rajaraman, D. F. Wong: Optimal Clustering for Delay Minimization. DAC 1993: 309-314 | |
| 35 | Glenn G. Lai, Donald S. Fussell, D. F. Wong: HV/VH Trees: A New Spatial Data Structure for Fast Region Queries. DAC 1993: 43-47 | |
| 34 | Kai Zhu, D. F. Wong, Yao-Wen Chang: Switch module design with application to two-dimensional segmentation design. ICCAD 1993: 480-485 | |
| 33 | Yao-Ping Chen, Ting-Chi Wang, D. F. Wong: A Graph Partitioning Problem for Multiple-chip Design. ISCAS 1993: 1778-1781 | |
| 32 | Yao-Ping Chen, D. F. Wong: On optimal approximation of orthogonal polygons. ISCAS 1993: 2533-2536 | |
| 31 | Yang Cai, Martin D. F. Wong: Efficient via shifting algorithms in channel compaction. IEEE Trans. on CAD of Integrated Circuits and Systems 12(12): 1848-1857 (1993) | |
| 30 | Yang Cai, Martin D. F. Wong: On minimizing the number of L-shaped channels in building-block layout [VLSI]. IEEE Trans. on CAD of Integrated Circuits and Systems 12(6): 757-769 (1993) | |
| 1992 | ||
| 29 | Ting-Chi Wang, D. F. Wong: A Graph Theoretic Technique to Speed up Floorplan Area Optimization. DAC 1992: 62-68 | |
| 28 | Kai Zhu, D. F. Wong: On channel segmentation design for row-based FPGAs. ICCAD 1992: 26-29 | |
| 27 | Yang Cai, D. F. Wong: Channel Density Minimization by Pin Permutation. ICCD 1992: 378-382 | |
| 26 | Shinichiro Haruyama, Martin D. F. Wong, Donald S. Fussell: Topological channel routing [VLSI]. IEEE Trans. on CAD of Integrated Circuits and Systems 11(10): 1177-1197 (1992) | |
| 25 | Ting-Chi Wang, Martin D. F. Wong: Optimal floorplan area optimization. IEEE Trans. on CAD of Integrated Circuits and Systems 11(8): 992-1002 (1992) | |
| 1991 | ||
| 24 | Yang Cai, D. F. Wong: On Minimizing the Number of L-Shaped Channels. DAC 1991: 328-334 | |
| 23 | Mohankumar Guruswamy, D. F. Wong: A General Multi-Layer Area Router. DAC 1991: 335-340 | |
| 22 | Yang Cai, D. F. Wong: Minimizing Channel Density by Shifting Blocks and Terminals. ICCAD 1991: 524-527 | |
| 21 | T. W. Her, D. F. Wong: Optimal Module Implementation and Its Application to Transistor Placement. ICCAD 1991: 98-101 | |
| 20 | John C. Chan, Baxter F. Womack, D. F. Wong: On the Manisfestation of Faults to Errors in Signature Analysis. ICCD 1991: 360-363 | |
| 19 | Khe-Sing The, D. F. Wong: Area Optimization for Higher Order Hierarchical Floorplans. ICCD 1991: 520-523 | |
| 18 | D. F. Wong, Edward M. Reingold: Probabilistic Analysis of a Grouping Algorithm. Algorithmica 6(2): 192-206 (1991) | |
| 17 | Yang Cai, Martin D. F. Wong: Optimal channel pin assignment. IEEE Trans. on CAD of Integrated Circuits and Systems 10(11): 1413-1424 (1991) | |
| 16 | Martin D. F. Wong, Mohankumar Guruswamy: Channel ordering for VLSI layout with rectilinear modules. IEEE Trans. on CAD of Integrated Circuits and Systems 10(11): 1425-1431 (1991) | |
| 15 | Yang Cai, Martin D. F. Wong: Channel/switchbox definition for VLSI building-block layout. IEEE Trans. on CAD of Integrated Circuits and Systems 10(12): 1485-1493 (1991) | |
| 14 | Khe-Sing The, Martin D. F. Wong, Jason Cong: A layout modification approach to via minimization. IEEE Trans. on CAD of Integrated Circuits and Systems 10(4): 536-541 (1991) | |
| 1990 | ||
| 13 | Ting-Chi Wang, D. F. Wong: An Optimal Algorithm for Floorplan Area Optimization. DAC 1990: 180-186 | |
| 12 | Yang Cai, D. F. Wong: A Channel/Switchbox Definition Algorithm for Building-Block Layout. DAC 1990: 638-641 | |
| 11 | Yang Cai, D. F. Wong: Optimal via-shifting in channel compaction. EURO-DAC 1990: 186-190 | |
| 10 | Yang Cai, D. F. Wong: An Optimal Channel Pin Assignment Algorithm. ICCAD 1990: 10-13 | |
| 9 | T. W. Her, D. F. Wong, T. H. Freeman: Optimal Orientations of Transistor Chains. ICCAD 1990: 524-527 | |
| 8 | Shinichiro Haruyama, D. F. Wong, Donald S. Fussell: Topological Routing Using Geometric Information. ICCAD 1990: 6-9 | |
| 1989 | ||
| 7 | D. F. Wong, P. S. Sakhamuri: Efficient Floorplan Area Optimization. DAC 1989: 586-589 | |
| 6 | Khe-Sing The, D. F. Wong, Jason Cong: VIA Minimization by Layout Modification. DAC 1989: 799-802 | |
| 5 | D. F. Wong, C. L. Liu: Floorplan Design of VLSI Circuits. Algorithmica 4(2): 263-291 (1989) | |
| 1988 | ||
| 4 | Jingsheng Cong, D. F. Wong: How to Obtain More Compactable Channel Routing Solutions. DAC 1988: 663-666 | |
| 3 | Jason Cong, Martin D. F. Wong, C. L. Liu: A new approach to three- or four-layer channel routing. IEEE Trans. on CAD of Integrated Circuits and Systems 7(10): 1094-1104 (1988) | |
| 1987 | ||
| 2 | D. F. Wong, C. L. Liu: Array Optimization for VLSI Synthesis. DAC 1987: 537-543 | |
| 1986 | ||
| 1 | D. F. Wong, C. L. Liu: A new algorithm for floorplan design. DAC 1986: 101-107 | |