Computers & Chemical Engineering, Volume 28

Volume 28, Numbers 1-2, January 2004

• Johan Grievink, Jan van Schijndel:
  Preface. 1
  
• Alessandro Alle, Lazaros G. Papageorgiou, Jose M. Pinto:
  A mathematical programming approach for cyclic production and cleaning scheduling of multistage continuous plants. 3-15
  
• Cristhian Almeida-Rivera, Johan Grievink:
  Feasibility of equilibrium-controlled reactive distillation process: application of residue curve mapping. 17-25
  
• Antonio A. Alonso, Ioannis G. Kevrekidis, Julio R. Banga, Christos E. Frouzakis:
  Optimal sensor location and reduced order observer design for distributed process systems. 27-35
  
• Yuri Avramenko, Lars Nyström, Andrzej Kraslawski:
  Selection of internals for reactive distillation column - case-based reasoning approach. 37-44
  
• Mariana Badell, J. Romero, R. Huertas, Luis Puigjaner:
  Planning, scheduling and budgeting value-added chains. 45-61
  
• Costin Sorin Bildea, Alexandre C. Dimian, Susana C. Cruz, Piet D. Iedema:
  Design of tubular reactors in recycle systems. 63-72
  
• A. Burdorf, B. Kampczyk, M. Lederhose, H. Schmidt-Traub:
  CAPD - computer-aided plant design. 73-81
  
• Yi Cao, Zhijia Yang:
  Multiobjective process controllability analysis. 83-90
  
• Kwok-Yuen Cheung, Chi-Wai Hui, Haruo Sakamoto, Kentaro Hirata, Lionel O'Young:
  Short-term site-wide maintenance scheduling. 91-102
  
• Sergio M. Corvalán, Inmaculada Ortiz, Ana M. Eliceche:
  Optimal design of membrane processes for wastewater treatment and metal recovery. 103-109
  
• Nael H. El-Farra, Panagiotis D. Christofides:
  Coordinating feedback and switching for control of spatially distributed processes. 111-128
  
• Katalin M. Hangos, Gábor Szederkényi, Zsolt Tuza:
  The effect of model simplification assumptions on the differential index of lumped process models. 129-137
  
• Kentaro Hirata, Haruo Sakamoto, Lionel O'Young, Kwok-Yuen Cheung, Chi-Wai Hui:
  Multi-site utility integration - an industrial case study. 139-148
  
• S. Kauchali, B. Hausberger, Diane Hildebrandt, David Glasser, Lorenz T. Biegler:
  Automating reactor network synthesis: finding a candidate attainable region for the water-gas shift (WGS) reaction. 149-160
  
• Yi Liu, Elling W. Jacobsen:
  On the use of reduced order models in bifurcation analysis of distributed parameter systems. 161-169
  
• Leandro Magatão, Lucia V. R. Arruda, Flávio Neves Jr.:
  A mixed integer programming approach for scheduling commodities in a pipeline. 171-185
  
• Erasmo Mancusi, Lucia Russo, Gaetano Continillo, Silvestro Crescitelli:
  Computation of frequency locking regions for a discontinuous periodically forced reactor. 187-194
  
• Vassilis Sakizlis, Vivek Dua, John D. Perkins, Efstratios N. Pistikopoulos:
  Robust model-based tracking control using parametric programming. 195-207
  
• Haralambos Sarimveis, Alex Alexandridis, Stefanos Mazarakis, George V. Bafas:
  A new algorithm for developing dynamic radial basis function neural network models based on genetic algorithms. 209-217
  
• Sigurd Skogestad:
  Control structure design for complete chemical plants. 219-234
  
• Aleksander Sorsak, Zdravko Kravanja:
  MINLP retrofit of heat exchanger networks comprising different exchanger types. 235-251
  
• Günter Wozny, Pu Li:
  Optimisation and experimental verification of startup policies for distillation columns. 253-265
  
• W. S. Yip, Thomas E. Marlin:
  The effect of model fidelity on real-time optimization performance. 267-280
  

Volume 28, Number 3, March 2004

• Ibrahim Kaya:
  IMC based automatic tuning method for PID controllers in a Smith predictor configuration. 281-290
  
• G. C. Itle, Andrew G. Salinger, Roger P. Pawlowski, John N. Shadid, Lorenz T. Biegler:
  A tailored optimization strategy for PDE-based design: application to a CVD reactor. 291-302
  
• B. Wu, R. E. White:
  One implementation variant of the finite difference method for solving ODEs/DAEs. 303-309
  
• Abhijit Kulkarni, Vaidyanathan K. Jayaraman, Bhaskar D. Kulkarni:
  Support vector classification with parameter tuning assisted by agent-based technique. 311-318
  
• Michael Mangold, Martin Ginkel, Ernst Dieter Gilles:
  A model library for membrane reactors implemented in the process modelling tool P_ROM_oT. 319-332
  
• Jing Wei, Matthew J. Realff:
  Sample average approximation methods for stochastic MINLPs. 333-346
  
• Andrei Romanenko, José A. A. M. Castro:
  The unscented filter as an alternative to the EKF for nonlinear state estimation: a simulation case study. 347-355
  
• Jeffrey Dean Kelly:
  Formulating large-scale quantity-quality bilinear data reconciliation problems. 357-362
  
• Swarnendu Bhushan, I. A. Karimi:
  Heuristic algorithms for scheduling an automated wet-etch station. 363-379
  
• Derya B. Özyurt, Ralph W. Pike:
  Theory and practice of simultaneous data reconciliation and gross error detection for chemical processes. 381-402
  
• Ioannis Papamichail, Claire S. Adjiman:
  Global optimization of dynamic systems. 403-415
  
• Donald J. Chmielewski, Trushar Agrawal:
  On the scheduling of leak detection personnel. 417-424
  
• S. Siddhaye, Kyle V. Camarda, M. Southard, E. M. Topp:
  Pharmaceutical product design using combinatorial optimization. 425-434
  

Volume 28, Number 4, April 2004

• Gintaras V. Reklaitis:
  Editorial Note. 435
  
• R. W. H. Sargent:
  Introduction: 25 years of progress in process systems engineering. 437-439
  
• Scott D. Barnicki, Jeffrey J. Siirola:
  Process synthesis prospective. 441-446
  
• Arthur Westerberg:
  A retrospective on design and process synthesis. 447-458
  
• Laurent Cavin, Ulrich Fischer, F. Glover, Konrad Hungerbühler:
  Multi-objective process design in multi-purpose batch plants using a Tabu Search optimization algorithm. 459-478
  
• Jietae Lee, Thomas F. Edgar:
  Simulations of stable non-conventional and large dimensional linear processes using the FFT method. 479-485
  
• Michael Shagalov, Hector Budman:
  On-line adaptive parameter estimator tuning. 487-499
  
• Fabrizio Bezzo, Sandro Macchietto, Constantinos C. Pantelides:
  A general methodology for hybrid multizonal/CFD models: Part I. Theoretical framework. 501-511
  
• Fabrizio Bezzo, Sandro Macchietto:
  A general methodology for hybrid multizonal/CFD models: Part II. Automatic zoning. 513-525
  
• J. Bosch, F. Strozzi, Joseph P. Zbilut, J. M. Zaldívar:
  On-line runaway detection in isoperibolic batch and semibatch reactors using the divergence criterion. 527-544
  
• Pierre Dufour, Dennis J. Michaud, Y. Touré, Prasad S. Dhurjati:
  A partial differential equation model predictive control strategy: application to autoclave composite processing. 545-556
  
• J. Krishnan, O. Runborg, Ioannis G. Kevrekidis:
  Bifurcation analysis of nonlinear reaction-diffusion problems using wavelet-based reduction techniques. 557-574
  
• P. H. H. Araújo, R. Giudici:
  Corrigendum to "Optimization of semicontinuous emulsion polymerization reactions by IDP procedure with variable time intervals" [Comput. Chem. Eng. 27 (2003) 1345-1360]]. 575-578
  
• Xuefeng Yan, Dezhao Chen, Shangxu Hu:
  Corrigendum to "Chaos-genetic algorithms for optimizing the operation conditions based on RBF-PLS model" [Comput. Chem. Eng. 27(2003) 1393-1404]. 579
  
• Giovani C. Nunes, Serkan Kincal, Oscar D. Crisalle:
  Erratum to "A polynomial perspective on the stability of multivariable predictive controllers" [Comput. Chem. Eng. 27 (2003) 1097-1111]. 581-582
  

Volume 28, Number 5, May 2004

• Andrzej Kraslawski, Ilkka Turunen:
  Preface. 583
  
• André Bardow, Wolfgang Marquardt:
  Identification of diffusive transport by means of an incremental approach. 585-595
  
• Maria do Carmo Coimbra, Carlos Sereno, Alírio Rodrigues:
  Moving finite element method: applications to science and engineering problems. 597-603
  
• Sunitha Chavali, Bao Lin, David C. Miller, Kyle V. Camarda:
  Environmentally-benign transition metal catalyst design using optimization techniques. 605-611
  
• Luis A. Cisternas, Jessica Cueto, Ross Swaney:
  Flowsheet synthesis of fractional crystallization processes with cake washing. 613-623
  
• Caglar Citir, Zeki Aktas, Ridvan Berber:
  Off-line image analysis for froth flotation of coal. 625-632
  
• A. O. S. Costa, E. C. Biscaia Jr., E. L. Lima:
  Mathematical description of the kraft recovery boiler furnace. 633-641
  
• D. Demicoli, J. Stichlmair:
  Separation of ternary mixtures in a batch distillation column with side withdrawal. 643-650
  
• Marie-Noëlle Dumont, Georges Heyen:
  Mathematical modelling and design of an advanced once-through heat recovery steam generator. 651-660
  
• Sebastián Eloy Sequeira, Miguel Herrera, Moisès Graells, Luis Puigjaner:
  On-line process optimization: parameter tuning for the real time evolution (RTE) approach. 661-672
  
• Stefan Emet, Tapio Westerlund:
  Comparisons of solving a chromatographic separation problem using MINLP methods. 673-682
  
• H. K. Engelien, Sigurd Skogestad:
  Selecting appropriate control variables for a heat-integrated distillation system with prefractionator. 683-691
  
• N. Irsic Bedenik, Bojan Pahor, Zdravko Kravanja:
  An integrated strategy for the hierarchical multilevel MINLP synthesis of overall process flowsheets using the combined synthesis/analysis approach. 693-706
  
• Aaron A. Levis, Lazaros G. Papageorgiou:
  A hierarchical solution approach for multi-site capacity planning under uncertainty in the pharmaceutical industry. 707-725
  
• Ai Chye Lim, Yuhong Zhou, John Washbrook, Nigel John Titchener-Hooker, Suzanne S. Farid:
  A decisional-support tool to model the impact of regulatory compliance activities in the biomanufacturing industry. 727-735
  
• János Madár, Ferenc Szeifert, Lajos Nagy, Tibor Chován, János Abonyi:
  Tendency model-based improvement of the slave loop in cascade temperature control of batch process units. 737-744
  
• A. P. Oliveira Francisco, H. A. Matos:
  Multiperiod synthesis and operational planning of utility systems with environmental concerns. 745-753
  
• R. Oliveira:
  Combining first principles modelling and artificial neural networks: a general framework. 755-766
  
• José María Ponce-Ortega, Vicente Rico-Ramírez, Salvador Hernández-Castro, Urmila M. Diwekar:
  Improving convergence of the stochastic decomposition algorithm by using an efficient sampling technique. 767-773
  
• Jens-Uwe Repke, Olivier Villain, Günter Wozny:
  A nonequilibrium model for three-phase distillation in a packed column: modelling and experiments. 775-780
  
• A. Rodríguez-Martínez, Ivan López-Arévalo, René Bañares-Alcántara, Arantza Aldea:
  Multi-model knowledge representation in the retrofit of processes. 781-788
  
• Debasis Sarkar, Jayant M. Modak:
  Optimization of fed-batch bioreactors using genetic algorithm: multiple control variables. 789-798
  
• Panos Seferlis, Nikolaos F. Giannelos:
  A two-layered optimisation-based control strategy for multi-echelon supply chain networks. 799-809
  
• Juan Gabriel Segovia-Hernández, Salvador Hernández, Vicente Rico-Ramírez, Arturo Jiménez:
  A comparison of the feedback control behavior between thermally coupled and conventional distillation schemes. 811-819
  
• Yoshiaki Shimizu, Yasutsugu Tanaka, Atsuyuki Kawada:
  Multi-objective optimization system, MOON² on the Internet. 821-828
  
• S. Skouras, Sigurd Skogestad:
  Time (energy) requirements in closed batch distillation arrangements. 829-837
  
• Julius Zilinskas, Ian David Lockhart Bogle:
  Balanced random interval arithmetic. 839-851
  

Volume 28, Numbers 6-7, June 2004

• Ignacio E. Grossmann, Conor M. McDonald:
  Foreword. 853
  
• Jeremy F. Shapiro:
  Challenges of strategic supply chain planning and modeling. 855-861
  
• Winston Lasschuit, Nort Thijssen:
  Supporting supply chain planning and scheduling decisions in the oil and chemical industry. 863-870
  
• Sérgio M. S. Neiro, José M. Pinto:
  A general modeling framework for the operational planning of petroleum supply chains. 871-896
  
• Lifei Cheng, Marco A. Duran:
  Logistics for world-wide crude oil transportation using discrete event simulation and optimal control. 897-911
  
• Guido Berning, Marcus Brandenburg, Korhan Gürsoy, Jürgen S. Kussi, Vipul Mehta, Franz-Josef Tölle:
  Integrating collaborative planning and supply chain optimization for the chemical process industry (I) - methodology. 913-927
  
• Nilay Shah:
  Pharmaceutical supply chains: key issues and strategies for optimisation. 929-941
  
• Colin R. Gardner, Orn Almarsson, Hongming Chen, Sherry Morissette, Matt Peterson, Zhong Zhang, Szu Wang, Anthony Lemmo, Javier Gonzalez-Zugasti, Julie Monagle, Joseph Marchionna, Steve Ellis, Chris McNulty, Alasdair Johnson, Doug Levinson, Michael Cima:
  Application of high throughput technologies to drug substance and drug product development. 943-953
  
• Paul I. Barton, Cha Kun Lee:
  Design of process operations using hybrid dynamic optimization. 955-969
  
• Nikolaos V. Sahinidis:
  Optimization under uncertainty: state-of-the-art and opportunities. 971-983
  
• Metin Türkay, Cihan Oruç, Kaoru Fujita, Tatsuyuki Asakura:
  Multi-company collaborative supply chain management with economical and environmental considerations. 985-992
  
• Ankit Singhvi, K. P. Madhavan, Uday V. Shenoy:
  Pinch analysis for aggregate production planning in supply chains. 993-999
  
• Zhenya Jia, Marianthi G. Ierapetritou:
  Efficient short-term scheduling of refinery operations based on a continuous time formulation. 1001-1019
  
• Christos T. Maravelias, Ignacio E. Grossmann:
  Optimal resource investment and scheduling of tests for new product development. 1021-1038
  
• Jaein Choi, Matthew J. Realff, Jay H. Lee:
  Dynamic programming in a heuristically confined state space: a stochastic resource-constrained project scheduling application. 1039-1058
  
• Carlos A. Méndez, Jaime Cerdá:
  An MILP framework for batch reactive scheduling with limited discrete resources. 1059-1068
  
• Xiaoxia Lin, Stacy L. Janak, Christodoulos A. Floudas:
  A new robust optimization approach for scheduling under uncertainty: : I. Bounded uncertainty. 1069-1085
  
• Guido Sand, Sebastian Engell:
  Modeling and solving real-time scheduling problems by stochastic integer programming. 1087-1103
  
• Zorka Novak Pintaric, Zdravko Kravanja:
  A strategy for MINLP synthesis of flexible and operable processes. 1105-1119
  
• Jun-Hyung Ryu, Vivek Dua, Efstratios N. Pistikopoulos:
  A bilevel programming framework for enterprise-wide process networks under uncertainty. 1121-1129
  
• Cheng-Liang Chen, Wen-Cheng Lee:
  Multi-objective optimization of multi-echelon supply chain networks with uncertain product demands and prices. 1131-1144
  
• Aninda Chakraborty, Andres Malcolm, Richard D. Colberg, Andreas A. Linninger:
  Optimal waste reduction and investment planning under uncertainty. 1145-1156
  
• Manabu Kano, Shinji Hasebe, Iori Hashimoto, Hiromu Ohno:
  Evolution of multivariate statistical process control: application of independent component analysis and external analysis. 1157-1166
  

Volume 28, Number 8, July 2004

• Gintaras V. Reklaitis:
  Editorial note. 1167
  
• Lorenz T. Biegler, Ignacio E. Grossmann:
  Retrospective on optimization. 1169-1192
  
• Ignacio E. Grossmann, Lorenz T. Biegler:
  Part II. Future perspective on optimization. 1193-1218
  
• Gintaras V. Reklaitis:
  A Systematic Method for Reaction Invariants and Mole Balances for Complex Chemistries: S.B. Gadewar, M.F. Doherty, M.F. Malone. 1219-1221
  
• Jose Leboreiro, Joaquin Acevedo:
  Processes synthesis and design of distillation sequences using modular simulators: a genetic algorithm framework. 1223-1236
  
• Vasilios I. Manousiouthakis, Lealon L. Martin:
  A minimum area (MA) targeting scheme for single component MEN and HEN synthesis. 1237-1247
  
• Birgit Bayer, Wolfgang Marquardt:
  Towards integrated information models for data and documents. 1249-1266
  
• Audun S. Jetlund, I. A. Karimi:
  Improving the logistics of multi-compartment chemical tankers. 1267-1283
  
• Jaein Choi, Matthew J. Realff, Jay H. Lee:
  An algorithmic framework for improving heuristic solutions: Part I. A deterministic discount coupon traveling salesman problem. 1285-1296
  
• Jaein Choi, Jay H. Lee, Matthew J. Realff:
  An algorithmic framework for improving heuristic solutions: Part II. A new version of the stochastic traveling salesman problem. 1297-1307
  
• Young-Il Lim, Sin-Chung Chang, Sten Bay Jørgensen:
  A novel partial differential algebraic equation (PDAE) solver: iterative space-time conservation element/solution element (CE/SE) method. 1309-1324
  
• Simant R. Upreti:
  A new robust technique for optimal control of chemical engineering processes. 1325-1336
  
• Deepak Srinivasagupta, Heinz Schättler, Babu Joseph:
  Time-stamped model predictive control: an algorithm for control of processes with random delays. 1337-1346
  
• J. C. C. Young, R. Baker, C. L. E. Swartz:
  Input saturation effects in optimizing control - inclusion within a simultaneous optimization framework. 1347-1360
  
• D. Zheng, K. A. Hoo:
  System identification and model-based control for distributed parameter systems. 1361-1375
  
• Sang Wook Choi, Jin Hyun Park, In-Beum Lee:
  Process monitoring using a Gaussian mixture model via principal component analysis and discriminant analysis. 1377-1387
  
• Leo H. Chiang, Mark E. Kotanchek, Arthur K. Kordon:
  Fault diagnosis based on Fisher discriminant analysis and support vector machines. 1389-1401
  
• Weixiang Zhao, Dezhao Chen, Shangxu Hu:
  Detection of outlier and a robust BP algorithm against outlier. 1403-1408
  
• Vikas Goel, Ignacio E. Grossmann:
  A stochastic programming approach to planning of offshore gas field developments under uncertainty in reserves. 1409-1429
  
• Niels Rode Kristensen, Henrik Madsen, Sten Bay Jørgensen:
  A method for systematic improvement of stochastic grey-box models. 1431-1449
  
• B. Lin, D. C. Miller:
  Solving heat exchanger network synthesis problems with Tabu Search. 1451-1464
  
• F. Bagui, M. A. Abdelghani-Idrissi, H. Chafouk:
  Heat exchanger Kalman filtering with process dynamic acknowledgement. 1465-1473
  
• Audun Faanes, Sigurd Skogestad:
  pH-neutralization: integrated process and control design. 1475-1487
  
• Weiwu Yan, Huihe Shao, Xiaofan Wang:
  Soft sensing modeling based on support vector machine and Bayesian model selection. 1489-1498
  
• A. Andrásik, Alojz Mészáros, S. F. de Azevedo:
  On-line tuning of a neural PID controller based on plant hybrid modeling. 1499-1509
  
• R. Rejowski Jr., J. M. Pinto:
  Efficient MILP formulations and valid cuts for multiproduct pipeline scheduling. 1511-1528
  
• Debjit Sanpui, Manish K. Singh, Ashok Khanna:
  Estimation of LLX for PIONA families and its validation. 1529-1546
  

Volume 28, Number 9, August 2004

• Gintaras V. Reklaitis:
  Agent-based supply chain management parts 1 and 2. 1547-1548
  
• Hong-Mei Liu, Ji-Huan He:
  Variational approach to chemical reaction. 1549
  
• Xiang Li, Zhijiang Shao, Jixin Qian:
  Module-oriented automatic differentiation in chemical process systems optimization. 1551-1561
  
• Vasilios I. Manousiouthakis, Ahmad M. Justanieah, Larry A. Taylor:
  The Shrink-Wrap algorithm for the construction of the attainable region: an application of the IDEAS framework. 1563-1575
  
• P. S. Shelokar, Vaidyanathan K. Jayaraman, Bhaskar D. Kulkarni:
  An ant colony classifier system: application to some process engineering problems. 1577-1584
  
• Håvard Lindborg, Vegard Eide, Steffen Unger, Siren T. Henriksen, Hugo A. Jakobsen:
  Parallelization and performance optimization of a dynamic PDE fixed bed reactor model for practical applications. 1585-1597
  
• S. Salomons, R. E. Hayes, M. Poirier, H. Sapoundjiev:
  Modelling a reverse flow reactor for the catalytic combustion of fugitive methane emissions. 1599-1610
  
• Rafael de Pelegrini Soares, Argimiro R. Secchi:
  Modifications, simplifications, and efficiency tests for the CAPE-OPEN numerical open interfaces. 1611-1621
  
• W. Cao, Y. C. Soh:
  Nonlinear multi-rate current state estimation: convergence analysis and application to biological systems. 1623-1633
  
• Hancong Liu, Sirish Shah, Wei Jiang:
  On-line outlier detection and data cleaning. 1635-1647
  
• F. G. Smith III, R. A. Dimenna:
  Simulation of a batch chemical process using parallel computing with PVM and Speedup. 1649-1659
  
• Ruy Sousa Jr., Gustavo P. Lopes, Gilson A. Pinto, Paulo I. F. Almeida, Roberto C. Giordano:
  GMC-fuzzy control of pH during enzymatic hydrolysis of cheese whey proteins. 1661-1672
  
• Zhigang Shang, Antonis Kokossis:
  A transhipment model for the optimisation of steam levels of total site utility system for multiperiod operation. 1673-1688
  
• S. Skouras, Sigurd Skogestad:
  Time requirements for heteroazeotropic distillation in batch columns. 1689-1700
  
• Laurentiu A. Tarca, Bernard P. A. Grandjean, Faïçal Larachi:
  Embedding monotonicity and concavity in the training of neural networks by means of genetic algorithms: Application to multiphase flow. 1701-1713
  
• Soorathep Kheawhom, Masahiko Hirao:
  Decision support tools for environmentally benign process design under uncertainty. 1715-1723
  
• Celina P. Leão, Alírio E. Rodrigues:
  Transient and steady-state models for simulated moving bed processes: numerical solutions. 1725-1741
  
• M. M. Mwembeshi, C. A. Kent, S. Salhi:
  A genetic algorithm based approach to intelligent modelling and control of pH in reactors. 1743-1757
  
• Khalid Alhumaizi:
  Comparison of finite difference methods for the numerical simulation of reacting flow. 1759-1769
  
• Vishal Goyal, Marianthi G. Ierapetritou:
  Computational studies using a novel simplicial-approximation based algorithm for MINLP optimization. 1771-1780
  
• Steven W. Su, Jie Bao, Peter L. Lee:
  Analysis of decentralized integral controllability for nonlinear systems. 1781-1787
  
• Venkat Venkatasubramanian, Santhoji Katare, Priyan R. Patkar, Fangping Mu:
  Spontaneous emergence of complex optimal networks through evolutionary adaptation. 1789-1798
  
• Silvina I. Biagiola, Nélida Gálvez, José L. Figueroa:
  Performance criteria based on nonlinear measures. 1799-1808
  
• Hossam A. Gabbar, Atsushi Aoyama, Yuji Naka:
  Recipe formal definition language for operating procedures synthesis. 1809-1822
  
• S. J. Lou, T. A. Duever, H. M. Budman:
  Optimal experimental design for training of a fault diagnosis algorithm. 1823-1836
  
• Jong-Min Lee, ChangKyoo Yoo, In-Beum Lee:
  Fault detection of batch processes using multiway kernel principal component analysis. 1837-1847
  
• Balram Suman:
  Study of simulated annealing based algorithms for multiobjective optimization of a constrained problem. 1849-1871
  
• Ludwig C. Nitsche, Gunther Machu, Walter Meile:
  Wavelets and fast summations for particle simulations of gravitational flows of miscible drops. 1873-1879
  
• Silvina I. Biagiola, José L. Figueroa:
  A high gain nonlinear observer: application to the control of an unstable nonlinear process. 1881-1898
  
• E. J. Adam, Jacinto L. Marchetti:
  Designing and tuning robust feedforward controllers. 1899-1911
  
• S. Gomez-Salazar, J. C. Heydweiller, L. L. Tavlarides:
  Solution of adsorption problems with steep concentration gradients and nonlinear isotherms. 1913-1917
  

Volume 28, Number 10, September 2004

• Andy Hrymak, George Stephanopoulos:
  Preface to the "Art Westerberg" Festschrift. 1919
  
• Christos T. Maravelias, Ignacio E. Grossmann:
  A hybrid MILP/CP decomposition approach for the continuous time scheduling of multipurpose batch plants. 1921-1949
  
• Oliver Stein, Jan Oldenburg, Wolfgang Marquardt:
  Continuous reformulations of discrete-continuous optimization problems. 1951-1966
  
• Yinhua Jin, Yuh Yamashita, Hirokazu Nishitani:
  Human modeling and simulation for plant operations. 1967-1980
  
• C. Ryan Gwaltney, Mark P. Styczynski, Mark A. Stadtherr:
  Reliable computation of equilibrium states and bifurcations in food chain models. 1981-1996
  
• C. P. Almeida-Rivera, P. L. J. Swinkels, Johan Grievink:
  Designing reactive distillation processes: present and future. 1997-2020
  
• A. Higler, R. Chande, R. Taylor, R. Baur, R. Krishna:
  Nonequilibrium modeling of three-phase distillation. 2021-2036
  
• Arvind U. Raghunathan, M. Soledad Diaz, Lorenz T. Biegler:
  An MPEC formulation for dynamic optimization of distillation operations. 2037-2052
  
• Diego C. Cafaro, Jaime Cerdá:
  Optimal scheduling of multiproduct pipeline systems using a non-discrete MILP formulation. 2053-2068
  
• Vassilis Sakizlis, John D. Perkins, Efstratios N. Pistikopoulos:
  Recent advances in optimization-based simultaneous process and control design. 2069-2086
  
• June Young Jung, Gary Blau, Joseph F. Pekny, Gintaras V. Reklaitis, David Eversdyk:
  A simulation based optimization approach to supply chain management under demand uncertainty. 2087-2106
  

Volume 28, Number 11, October 2004

• Gintaras V. Reklaitis:
  Editorial note. 2107
  
• Christodoulos A. Floudas, Xiaoxia Lin:
  Continuous-time versus discrete-time approaches for scheduling of chemical processes: a review. 2109-2129
  
• Yvonne Power, Parisa A. Bahri:
  A two-step supervisory fault diagnosis framework. 2131-2140
  
• Ioannis P. Androulakis:
  "Store and retrieve" representations of dynamic systems motivated by studies in gas phase chemical kinetics. 2141-2155
  
• A. Vande Wouwer, Christine Renotte, Philippe Bogaerts:
  Biological reaction modeling using radial basis function networks. 2157-2164
  
• Mariana Barttfeld, Pío A. Aguirre, Ignacio E. Grossmann:
  A decomposition method for synthesizing complex column configurations using tray-by-tray GDP models. 2165-2188
  
• Fang Wang, Xiao-ping Jia, Shi-qing Zheng, Jin-cai Yue:
  An improved MT-NT method for gross error detection and data reconciliation. 2189-2192
  
• Jeffrey D. Kelly, John L. Mann:
  Flowsheet decomposition heuristic for scheduling: a relax-and-fix method. 2193-2200
  
• R. Padma Sree, M. N. Srinivas, M. Chidambaram:
  A simple method of tuning PID controllers for stable and unstable FOPTD systems. 2201-2218
  
• Shengjing Mu, Hongye Su, Tao Jia, Yong Gu, Jian Chu:
  Scalable multi-objective optimization of industrial purified terephthalic acid (PTA) oxidation process. 2219-2231
  
• Hüseyin Yapici, Gamze Bastürk:
  CFD modeling of conjugate heat transfer and homogeneously mixing two different fluids in a stirred and heated hemispherical vessel. 2233-2244
  
• Saadet Ulas, Urmila M. Diwekar:
  Thermodynamic uncertainties in batch processing and optimal control. 2245-2258
  
• Pierre Dufour, Y. Touré:
  Multivariable model predictive control of a catalytic reverse flow reactor. 2259-2270
  
• Dan Wu, Marianthi G. Ierapetritou:
  Cyclic short-term scheduling of multiproduct batch plants using continuous-time representation. 2271-2286
  
• B. Lin, D. C. Miller:
  Tabu search algorithm for chemical process optimization. 2287-2306
  
• José Antonio Caballero, Ignacio E. Grossmann:
  Design of distillation sequences: from conventional to fully thermally coupled distillation systems. 2307-2329
  
• Duncan M. Fraser, Uday V. Shenoy:
  A new method for sizing mass exchange units without the singularity of the Kremser equation. 2331-2335
  
• A. A. Iordanidis, M. van Sint Annaland, A. E. Kronberg, J. A. M. Kuipers:
  A numerical method for the solution of the wave model and convection dominated diffusion type models for catalytic packed bed reactors. 2337-2349
  
• M. S. Skjøth-Rasmussen, O. Holm-Christensen, M. Østberg, T. S. Christensen, T. Johannessen, A. D. Jensen, P. Glarborg, H. Livbjerg:
  Post-processing of detailed chemical kinetic mechanisms onto CFD simulations. 2351-2361
  
• A. Fortin, F. Bertrand, M. Fortin, É. Chamberland, P. E. Boulanger-Nadeau, A. El. Maliki, N. Najeh:
  An adaptive remeshing strategy for shear-thinning fluid flow simulations. 2363-2375
  
• M. M. Miladi, I. M. Mujtaba:
  Optimisation of design and operation policies of binary batch distillation with fixed product demand. 2377-2390
  
• Athanasios I. Papadopoulos, Patrick Linke:
  On the synthesis and optimization of liquid-liquid extraction processes using stochastic search methods. 2391-2406
  
• Laurent Simon, Maria Fernandes:
  Neural network-based prediction and optimization of estradiol release from ethylene-vinyl acetate membranes. 2407-2419
  
• J. P. B. Mota, I. A. A. C. Esteves, M. Rostam-Abadi:
  Dynamic modelling of an adsorption storage tank using a hybrid approach combining computational fluid dynamics and process simulation. 2421-2431
  
• R. Padma Sree, M. Chidambaram:
  Simple method of calculating set point weighting parameter for unstable systems with a zero. 2433-2437
  

Volume 28, Number 12, November 2004

• Gintaras V. Reklaitis:
  Editorial. 2439
  
• Rafiqul Gani:
  Chemical product design: challenges and opportunities. 2441-2457
  
• Christian A. Rivera, Mourad Heniche, Gabriel Ascanio, Philippe A. Tanguy:
  A virtual finite element model for centered and eccentric mixer configurations. 2459-2468
  
• Raphaële Thery, Felix Llovell, Xuan Meyer, Vincent Gerbaud, Xavier Joulia:
  Modelling of a dynamic multiphase flash: the positive flash: Application to the calculation of ternary diagrams. 2469-2480
  
• Alexandra Grancharova, Tor Arne Johansen, Jus Kocijan:
  Explicit model predictive control of gas-liquid separation plant via orthogonal search tree partitioning. 2481-2491
  
• Éva Orbán-Mihálykó, Béla G. Lakatos:
  Intermediate storage in batch/continuous processing systems under stochastic operation conditions. 2493-2508
  
• Jeremy F. Burri, Vasilios I. Manousiouthakis:
  Global optimization of reactive distillation networks using IDEAS. 2509-2521
  
• D. Wang, D. H. Zhou, Y. H. Jin, S. Joe Qin:
  A strong tracking predictor for nonlinear processes with input time delay. 2523-2540
  
• Angelo Lucia, Feng Yang:
  Solving distillation problems by terrain methods. 2541-2545
  
• Raymond R. Tan, Dennis E. Cruz:
  Synthesis of robust water reuse networks for single-component retrofit problems using symmetric fuzzy linear programming. 2547-2551
  
• Yoshikazu Ishii, Fred D. Otto:
  An enhanced pseudo-binary-mixture (PBM) algorithm for multistage separation processes. 2553-2567
  
• Santhoji Katare, Aditya Bhan, James M. Caruthers, W. Nicholas Delgass, Venkat Venkatasubramanian:
  A hybrid genetic algorithm for efficient parameter estimation of large kinetic models. 2569-2581
  
• Kishalay Mitra, Saptarshi Majumdar, Sasanka Raha:
  Multiobjective dynamic optimization of a semi-batch epoxy polymerization process. 2583-2594
  
• François Bertrand, T. Gange, E. Desaulniers, David Vidal, R. E. Hayes:
  Simulation of the consolidation of paper coating structures: probabilistic versus deterministic models. 2595-2604
  
• Ognjen Marjanovic, Barry Lennox:
  Infinite horizon model predictive control with no terminal constraint. 2605-2610
  
• Tiina Komulainen, Mauri Sourander, Sirkka-Liisa Jämsä Jounela:
  An online application of dynamic PLS to a dearomatization process. 2611-2619
  
• Isabel R. F. Guiamba, Michael Mulholland:
  Adaptive Linear Dynamic Matrix Control applied to an integrating process. 2621-2633
  
• Linglai Li, Donghua Zhou:
  Fast and robust fault diagnosis for a class of nonlinear systems: detectability analysis. 2635-2646
  
• Liexiang Yan, Kun Shen, Shenghua Hu:
  Solving mixed integer nonlinear programming problems with line-up competition algorithm. 2647-2657
  
• Dejan Kihas, Horacio J. Marquez:
  Computing the distance between a nonlinear model and its linear approximation: an L₂ approach. 2659-2666
  
• Wen Tan, Horacio J. Marquez, Tongwen Chen, Ji-zhen Liu:
  Multimodel analysis and controller design for nonlinear processes. 2667-2675
  
• J. Johri, B. J. Glasser:
  A bifurcation approach to understanding instabilities in gas-fluidized beds using a single phase compressible flow model. 2677-2693
  
• Morten Rode Kristensen, John Bagterp Jørgensen, Per Grove Thomsen, Sten Bay Jørgensen:
  An ESDIRK method with sensitivity analysis capabilities. 2695-2707
  
• A. L. Ahmad, I. A. Azid, A. R. Yusof, K. N. Seetharamu:
  Emission control in palm oil mills using artificial neural network and genetic algorithm. 2709-2715
  
• Magne Hillestad:
  A systematic generation of reactor designs: I. Isothermal conditions. 2717-2726
  
• M. F. Göz, S. Laín, M. Sommerfeld:
  Study of the numerical instabilities in Lagrangian tracking of bubbles and particles in two-phase flow. 2727-2733
  
• S. Elgue, L. Prat, M. Cabassud, J. M. Le Lann, J. Cézerac:
  Dynamic models for start-up operations of batch distillation columns with experimental validation. 2735-2747
  
• Daniel R. Saffer II, Francis J. Doyle III:
  Analysis of linear programming in model predictive control. 2749-2763
  
• H. Znad, V. Báles, Y. Kawase:
  Modeling and scale up of airlift bioreactor. 2765-2777
  
• Benyamin Grosman, Daniel R. Lewin:
  Adaptive genetic programming for steady-state process modeling. 2779-2790
  
• Ahmed Aseeri, Miguel J. Bagajewicz:
  New measures and procedures to manage financial risk with applications to the planning of gas commercialization in Asia. 2791-2821
  
• Dario Pacciarelli, Marco Pranzo:
  Production scheduling in a steelmaking-continuous casting plant. 2823-2835
  
• Jeffrey Dean Kelly:
  Techniques for solving industrial nonlinear data reconciliation problems. 2837-2843
  
• Vicente Rico-Ramírez, Urmila M. Diwekar:
  Stochastic maximum principle for optimal control under uncertainty. 2845-2849
  
• Mario Llano-Restrepo, Jaime Aguilar-Arias:
  Erratum to "Modeling and simulation of saline extractive distillation columns for the production of absolute ethanol" [Comput. Chem. Eng. 27 (2003) 527-549]. 2851
  

Last update Sat May 25 19:45:23 2013 CET by the DBLP Team — Data released under the ODC-BY 1.0 license — See also our legal information page