Computers & Chemical Engineering, Volume 29

Volume 29, Number 1, December 2004

• Bingzhen Chen, Arthur Westerberg:
  Preface. 1-2
  
• Jiming Wang:
  SINOPEC's reform and IT development. 3-6
  
• Satoshi Kawachi:
  Technological competitiveness in the chemical industry. 7-9
  
• B. Erik Ydstie:
  Distributed decision making in complex organizations: the adaptive enterprise. 11-27
  
• Ignacio E. Grossmann:
  Challenges in the new millennium: product discovery and design, enterprise and supply chain optimization, global life cycle assessment. 29-39
  
• Thomas F. Edgar:
  Control and operations: when does controllability equal profitability? 41-49
  
• Ka M. Ng:
  MOPSD: a framework linking business decision-making to product and process design. 51-56
  
• Shinji Hasebe:
  Design and operation of micro-chemical plants - bridging the gap between nano, micro and macro technologies. 57-64
  
• Wolfgang Marquardt, Manfred Nagl:
  Workflow and information centered support of design processes - the IMPROVE perspective. 65-82
  
• J. L. Cordiner:
  Challenges for the PSE community in formulations. 83-92
  
• Markus Heller, Dirk Jäger, Marcus Schlüter, Ralph Schneider, Bernhard Westfechtel:
  A management system for dynamic and interorganizational design processes in chemical engineering. 93-111
  
• John D. Siirola, Steinar Hauan, Arthur Westerberg:
  Computing Pareto fronts using distributed agents. 113-126
  
• Sigurd Skogestad:
  Near-optimal operation by self-optimizing control: from process control to marathon running and business systems. 127-137
  
• Heiko Briesen, Wolfgang Marquardt:
  Adaptive multigrid solution strategy for the dynamic simulation of petroleum mixture processes. 139-148
  
• Lifei Cheng, Eswaran Subrahmanian, Arthur Westerberg:
  A comparison of optimal control and stochastic programming from a formulation and computation perspective. 149-164
  
• Stefan Brüggemann, Wolfgang Marquardt:
  Rapid screening of design alternatives for nonideal multiproduct distillation processes. 165-179
  
• S. T. Holland, M. Tapp, Diane Hildebrandt, David Glasser, B. Hausberger:
  Novel separation system design using "moving triangles". 181-189
  
• Mingfang Kong, Bingzhen Chen, Xiaorong He, Shanying Hu:
  Gross error identification for dynamic system. 191-197
  
• Thidarat Tosukhowong, Jong Min Lee, Jay H. Lee, Joseph Lu:
  An introduction to a dynamic plant-wide optimization strategy for an integrated plant. 199-208
  
• Wook Chang, Tai-yong Lee:
  Observation of adsorption and permeation phenomena in silica membrane system through molecular dynamics simulation. 209-216
  
• I. A. Karimi, Zerlinda Y. L. Tan, Swarnendu Bhushan:
  An improved formulation for scheduling an automated wet-etch station. 217-224
  
• Yiming Lou, Panagiotis D. Christofides:
  Feedback control of surface roughness of GaAs (0 0 1) thin films using kinetic Monte Carlo models. 225-241
  
• Xiao-ping Jia, Fang-yu Han, Xin-shun Tan:
  Integrated environmental performance assessment of chemical processes. 243-247
  

Volume 29, Number 2, January 2005

• Mahsa Ghaeli, Parisa A. Bahri, Peter L. Lee, Tianlong Gu:
  Petri-net based formulation and algorithm for short-term scheduling of batch plants. 249-259
  
• N. Chawankul, H. Budman, P. L. Douglas:
  The integration of design and control: IMC control and robustness. 261-271
  
• Richard Faber, Tobias Jockenhövel, George Tsatsaronis:
  Dynamic optimization with simulated annealing. 273-290
  
• Matteo Chiesa, Vidar Mathiesen, Jens A. Melheim, Britt Halvorsen:
  Numerical simulation of particulate flow by the Eulerian-Lagrangian and the Eulerian-Eulerian approach with application to a fluidized bed. 291-304
  
• Rajagopalan Srinivasan, Pradeep Viswanathan, Hiranmayee Vedam, Ananthanarayanan Nochur:
  A framework for managing transitions in chemical plants. 305-322
  
• Bernt M. Åkesson, Hannu T. Toivonen, Jonas B. Waller, Rasmus H. Nyström:
  Neural network approximation of a nonlinear model predictive controller applied to a pH neutralization process. 323-335
  
• Bao Lin, Sunitha Chavali, Kyle V. Camarda, David C. Miller:
  Computer-aided molecular design using Tabu search. 337-347
  
• R. Gesthuisen, S. Krämer, G. Niggemann, J. R. Leiza, J. M. Asua:
  Determining the best reaction calorimetry technique: theoretical development. 349-365
  
• Ingmar Nopens, Daan Beheydt, Peter A. Vanrolleghem:
  Comparison and pitfalls of different discretised solution methods for population balance models: a simulation study. 367-377
  
• J. Turnbull, C. P. Thompson:
  Transient averaging to combine large eddy simulation with Reynolds averaged Navier-Stokes simulations. 379-392
  
• Ling Jiang, Lorenz T. Biegler, V. Grant Fox:
  Design and optimization of pressure swing adsorption systems with parallel implementation. 393-399
  
• Ivan Fort:
  Comments on "CFD modelling of conjugate heat transfer and homogeneously mixing two different fluids in a stirred and heated hemispherical vessel". 401
  
• Hüseyin Yapici, Gamze Bastürk:
  The response to "the letter to editor" received from Dr Ivan Fort, with regards to our article given in. 403
  

Volume 29, Number 3, February 2005

• Costas D. Maranas, Vassily Hatzimanikatis:
  Preface. 405-406
  
• Sheldon Park, Hidetoshi Kono, Wei Wang, Eric T. Boder, Jeffery G. Saven:
  Progress in the development and application of computational methods for probabilistic protein design. 407-421
  
• John L. Klepeis, Christodoulos A. Floudas:
  Analysis and prediction of loop segments in protein structures. 423-436
  
• Michael W. Deem:
  Complexity in the immune system. 437-446
  
• Carlos A. M. Riascos, Andreas K. Gombert, José M. Pinto:
  A global optimization approach for metabolic flux analysis based on labeling balances. 447-458
  
• S. Ghosh, T. Zhu, Ignacio E. Grossmann, M. M. Ataai, M. M. Domach:
  Closing the loop between feasible flux scenario identification for construct evaluation and resolution of realized fluxes via NMR. 459-466
  
• YoungJung Chang, Nikolaos V. Sahinidis:
  Optimization of metabolic pathways under stability considerations. 467-479
  
• Steven L. Bell, Bernhard O. Palsson:
  Phenotype phase plane analysis using interior point methods. 481-486
  
• Abhijit Anand Namjoshi, Doraiswami Ramkrishna:
  A cybernetic modeling framework for analysis of metabolic systems. 487-498
  
• Daniel C. McShan, Imran Shah:
  Heurstic search for metabolic engineering: de novo synthesis of vanillin. 499-507
  
• Jeanne Bonomo, Ryan T. Gill:
  Antibiotic resistance as a model for strain engineering. 509-517
  
• Mark P. Styczynski, Gregory Stephanopoulos:
  Overview of computational methods for the inference of gene regulatory networks. 519-534
  
• Ioannis P. Androulakis:
  Selecting maximally informative genes. 535-546
  
• Daniel E. Zak, Rajanikanth Vadigepalli, Gregory E. Gonye, Francis J. Doyle III, James S. Schwaber, Babatunde A. Ogunnaike:
  Unconventional systems analysis problems in molecular biology: a case study in gene regulatory network modeling. 547-563
  
• Anshuman Gupta, Jeffrey D. Varner, Costas D. Maranas:
  Large-scale inference of the transcriptional regulation of Bacillus subtilis. 565-576
  
• Howard Salis, Yiannis N. Kaznessis:
  Numerical simulation of stochastic gene circuits. 577-588
  
• Jessica R. Goodkind, Jeremy S. Edwards:
  Gene expression measurement technologies: innovations and ethical considerations. 589-596
  
• Ionela Zevedei-Oancea, Stefan Schuster:
  A theoretical framework for detecting signal transfer routes in signalling networks. 597-617
  
• Julio Saez-Rodriguez, Andreas Kremling, Ernst Dieter Gilles:
  Dissecting the puzzle of life: modularization of signal transduction networks. 619-629
  
• Nikos V. Mantzaris:
  Single-cell gene-switching networks and heterogeneous cell population phenotypes. 631-643
  
• Michael A. Henson:
  Cell ensemble modeling of metabolic oscillations in continuous yeast cultures. 645-661
  
• Daniel E. Zak, Jörg Stelling, Francis J. Doyle III:
  Sensitivity analysis of oscillatory (bio)chemical systems. 663-673
  
• Eric L. Haseltine, James B. Rawlings, John Yin:
  Dynamics of viral infections: incorporating both the intracellular and extracellular levels. 675-686
  

Volume 29, Number 4, March 2005

• Panagiotis D. Christofides, Antonios Armaou:
  Control of Multiscale and Distributed Process Systems. 687-688
  
• Ahmed E. Ismail, Gregory C. Rutledge, George Stephanopoulos:
  Using wavelet transforms for multiresolution materials modeling. 689-700
  
• M. A. Snyder, A. Chatterjee, D. G. Vlachos:
  Net-event kinetic Monte Carlo for overcoming stiffness in spatially homogeneous and distributed systems. 701-712
  
• Thomas A. Frewen, Talid Sinno, Walter Haeckl, Wilfried von Ammon:
  A systems-based approach for generating quantitative models of microstructural evolution in silicon materials processing. 713-730
  
• Antonios Armaou, Ioannis G. Kevrekidis, Constantinos Theodoropoulos:
  Equation-free gaptooth-based controller design for distributed complex/multiscale processes. 731-740
  
• Yiming Lou, Panagiotis D. Christofides:
  Feedback control of surface roughness in sputtering processes using the stochastic Kuramoto-Sivashinsky equation. 741-759
  
• Martha A. Gallivan:
  An estimation study for control of a lattice model of thin film deposition. 761-769
  
• Antonios Armaou:
  Output feedback control of dissipative distributed processes via microscopic simulations. 771-782
  
• Erzsébet Németh, Ian T. Cameron, Katalin M. Hangos:
  Diagnostic goal driven modelling and simulation of multiscale process systems. 783-796
  
• Nikolaos Kazantzis, Nguyen Huynh, Raymond A. Wright:
  Nonlinear observer design for the slow states of a singularly perturbed system. 797-806
  
• Eric Tatara, Inanç Birol, Fouad Teymour, Ali Cinar:
  Agent-based control of autocatalytic replicators in networks of reactors. 807-815
  
• Leonidas G. Bleris, Mayuresh V. Kothare:
  Low-order empirical modeling of distributed parameter systems using temporal and spatial eigenfunctions. 817-827
  
• Raymond A. Adomaitis:
  Identification of a deposition rate profile subspace corresponding to spatially-uniform films in planetary CVD reactors: a new criterion for uniformity control. 829-837
  
• Nicolas Hudon, Michel Perrier, Martin Guay, Denis Dochain:
  Adaptive extremum seeking control of a non-isothermal tubular reactor with unknown kinetics. 839-849
  
• D. Edouard, P. Dufour, H. Hammouri:
  Observer based multivariable control of a catalytic reverse flow reactor: comparison between LQR and MPC approaches. 851-865
  
• Michael A. Demetriou, Nikolaos Kazantzis:
  A new integrated output feedback controller synthesis and collocated actuator/sensor scheduling framework for distributed parameter processes. 867-876
  
• Prasenjit Ray, Panagiotis D. Christofides:
  Control of flow over a cylinder using rotational oscillations. 877-885
  
• Paul Sonda, Andrew Yeckel, Jeffrey J. Derby, Prodromos Daoutidis:
  The feedback control of the vertical Bridgman crystal growth process by crucible rotation: two case studies. 887-896
  
• Nikos V. Mantzaris:
  A cell population balance model describing positive feedback loop expression dynamics. 897-909
  
• Q. Hu, S. Rohani, A. Jutan:
  Modelling and optimization of seeded batch crystallizers. 911-918
  

Volume 29, Number 5, April 2005

• Kamal Morad, Brent R. Young, William Y. Svrcek:
  Rectification of plant measurements using a statistical framework. 919-940
  
• Chr. Boyadjiev, E. Dimitrova:
  An iterative method for model parameter identification: 1. Incorrect problem. 941-948
  
• Hossam A. Gabbar, Atsushi Aoyama, Yuji Naka:
  Automated solution for control recipe generation of chemical batch plants. 949-964
  
• R. Srinivasan, C. Wang, W. K. Ho, K. W. Lim:
  Neural network systems for multi-dimensional temporal pattern classification. 965-981
  
• Xiangping Zhang, Suojiang Zhang, Pingjing Yao, Yi Yuan:
  Modeling and simulation of high-pressure urea synthesis loop. 983-992
  
• F. Pettersson:
  Synthesis of large-scale heat exchanger networks using a sequential match reduction approach. 993-1007
  
• Suad A. Al-Redhwan, Barry D. Crittenden, Haitham M. S. Lababidi:
  Wastewater minimization under uncertain operational conditions. 1009-1021
  
• Rehan Sadiq, Faisal I. Khan, Brian Veitch:
  Evaluating offshore technologies for produced water management using GreenPro-I - a risk-based life cycle analysis for green and clean process selection and design. 1023-1039
  
• B. V. Babu, Rakesh Angira:
  Optimal design of an auto-thermal ammonia synthesis reactor. 1041-1045
  
• Kapil G. Gadkar, Sarika Mehra, James Gomes:
  On-line adaptation of neural networks for bioprocess control. 1047-1057
  
• Wongphaka Wongrat, Thongchai Srinophakun, Penjit Srinophakun:
  Modified genetic algorithm for nonlinear data reconciliation. 1059-1067
  
• W. Huang, P. W. H. Chung:
  Integrating routing and scheduling for pipeless plants in different layouts. 1069-1081
  
• Olivier Wailly, Nicolas Héraud:
  Cost-optimal design of reliable sensor networks extended to multi-linear system. 1083-1087
  
• O. L. Carrapiço, Darci Odloak:
  A stable model predictive control for integrating processes. 1089-1099
  
• Magne Hillestad:
  A systematic generation of reactor designs: II. Non-isothermal conditions. 1101-1112
  
• M. Arndt, S. Kleist, G. Miksch, Karl Friehs, Erwin Flaschel, J. Trierweiler, B. Hitzmann:
  A feedforward-feedback substrate controller based on a Kalman filter for a fed-batch cultivation of Escherichia coli producing phytase. 1113-1120
  
• S. R. Anderson, Visakan Kadirkamanathan, A. Chipperfield, V. Sharifi, J. Swithenbank:
  Multi-objective optimization of operational variables in a waste incineration plant. 1121-1130
  
• Balram Suman:
  Study of self-stopping PDMOSA and performance measure in multiobjective optimization. 1131-1147
  
• Ruy Sousa Jr., Gustavo P. Lopes, Gilson A. Pinto, Paulo I. F. Almeida, Roberto C. Giordano:
  Erratum to "GMC-fuzzy control of pH during enzymatic hydrolysis of cheese whey proteins": [Computers and Chemical Engineering 28 (2004) 1661-1672]. 1149
  
• Vishal Goyal, Marianthi G. Ierapetritou:
  Corrigendum to "Computational studies using a novel simplical-approximation based algorithm for MINLP optimization" [Computers and Chemical Engineering 28 (2004) 1771-1780]^*. 1151-1152
  
• Abderrahim Abbas:
  Letter to the Editor. 1153-1154
  
• M. Chidambaram, R. Padma Sree, M. N. Srinivas:
  Reply to the comments by Dr. A. Abbas on "A simple method of tuning PID controllers for stable and unstable FOPTD systems" [Comp. Chem. Eng. V28 (2004) 2201-2218]. 1155
  

Volume 29, Number 6, May 2005

• Ana Paula Barbosa-Póvoa, Henrique A. Matos:
  Preface. 1157
  
• Alan Jones, Stelios Rigopoulos, Rudi Zauner:
  Crystallization and precipitation engineering. 1159-1166
  
• Alírio E. Rodrigues, Mirjana Minceva:
  Modelling and simulation in chemical engineering: Tools for process innovation. 1167-1183
  
• Christodoulos A. Floudas, I. G. Akrotirianakis, S. Caratzoulas, Clifford A. Meyer, Josef Kallrath:
  Global optimization in the 21st century: Advances and challenges. 1185-1202
  
• Ignacio E. Grossmann, Pío A. Aguirre, Mariana Barttfeld:
  Optimal synthesis of complex distillation columns using rigorous models. 1203-1215
  
• John F. MacGregor, Honglu Yu, Salvador García Muñoz, Jesus Flores-Cerrillo:
  Data-based latent variable methods for process analysis, monitoring and control. 1217-1223
  
• Nilay Shah:
  Process industry supply chains: Advances and challenges. 1225-1236
  
• Roger Sargent:
  Process systems engineering: A retrospective view with questions for the future. 1237-1241
  
• Sebastian Engell, Abdelaziz Toumi:
  Optimisation and control of chromatography. 1243-1252
  
• Venkat Venkatasubramanian:
  Prognostic and diagnostic monitoring of complex systems for product lifecycle management: Challenges and opportunities. 1253-1263
  
• Wolfgang Marquardt, Martin Mönnigmann:
  Constructive nonlinear dynamics in process systems engineering. 1265-1275
  
• Benjamin Roe, Lazaros G. Papageorgiou, Nilay Shah:
  A hybrid MILP/CLP algorithm for multipurpose batch process scheduling. 1277-1291
  
• Tânia Pinto, Ana Paula F. D. Barbosa-Póvoa, Augusto Q. Novais:
  Optimal design and retrofit of batch plants with a periodic mode of operation. 1293-1303
  
• E. P. Schulz, M. S. Diaz, J. A. Bandoni:
  Supply chain optimization of large-scale continuous processes. 1305-1316
  
• Xiaotao Wan, Joseph F. Pekny, Gintaras V. Reklaitis:
  Simulation-based optimization with surrogate models - Application to supply chain management. 1317-1328
  
• Jorge Casas-Liza, José M. Pinto:
  Optimal scheduling of a lube oil and paraffin production plant. 1329-1344
  
• ChangKyoo Yoo, In-Beum Lee, Peter A. Vanrolleghem:
  Interpreting patterns and analysis of acute leukemia gene expression data by multivariate fuzzy statistical analysis. 1345-1356
  
• Anuradha Rajapakse, Nigel John Titchener-Hooker, Suzanne S. Farid:
  Modelling of the biopharmaceutical drug development pathway and portfolio management. 1357-1368
  
• Adriano Pinto Mariano, Eduardo Coselli Vasco de Toledo, José Marcos Francisco da Silva, Maria Regina Wolf Maciel, Rubens Maciel Filho:
  Development of a software for simulation analysis of the phenomenon of phase change of three-phase catalytic slurry reactor. 1369-1378
  
• Carine Gerkens, Georges Heyen:
  Use of parallel computers in rational design of redundant sensor networks. 1379-1387
  
• Juan Gabriel Segovia-Hernández, Salvador Hernández, Arturo Jiménez:
  Analysis of dynamic properties of alternative sequences to the Petlyuk column. 1389-1399
  
• Weihua Gao, Sebastian Engell:
  Iterative set-point optimization of batch chromatography. 1401-1409
  
• A. Simoglou, P. Georgieva, E. B. Martin, A. J. Morris, S. Feyo de Azevedo:
  On-line monitoring of a sugar crystallization process. 1411-1422
  
• Balazs Feil, János Abonyi, Sandor Z. Németh, Peter Arva:
  Monitoring process transitions by Kalman filtering and time-series segmentation. 1423-1431
  
• Andreas Hoffmann, Ilja Ausner, Jens-Uwe Repke, Günter Wozny:
  Fluid dynamics in multiphase distillation processes in packed towers. 1433-1437
  
• Giulia Bozzano, Mario Dente, Francesco Carlucci:
  The effect of naphthenic components in the visbreaking modeling. 1439-1446
  
• Eduardo Coselli Vasco de Toledo, Rogerio Favinha Martini, Maria Regina Wolf Maciel, Rubens Maciel Filho:
  Process intensification for high operational performance target: Autorefrigerated CSTR polymerization reactor. 1447-1455
  
• Filipe J. M. Neves, Dulce C. M. Silva, Nuno M. C. Oliveira:
  A robust strategy for optimizing complex distillation columns. 1457-1471
  
• Timo Seuranen, Markku Hurme, Elina Pajula:
  Synthesis of separation processes by case-based reasoning. 1473-1482
  
• Ana M. Eliceche, Sergio M. Corvalán, M. Fresnedo San Román, Inmaculada Ortiz:
  Minimum membrane area of an emulsion pertraction process for Cr(VI) removal and recovery. 1483-1490
  
• Raquel Durana Moita, Henrique A. Matos, M. Cristina Fernandes, Clemente Pedro Nunes, Jorge Miguel Prior:
  Dynamic modelling and simulation of a cogeneration system integrated with a salt recrystallization process. 1491-1505
  

Volume 29, Number 7, June 2005

• Nadia Hvala, Stanko Strmcnik, Davorka Sel, Srecko Milanic, B. Banko:
  Influence of model validation on proper selection of process models - an industrial case study. 1507-1522
  
• Vassileios D. Kosmidis, John D. Perkins, Efstratios N. Pistikopoulos:
  A mixed integer optimization formulation for the well scheduling problem on petroleum fields. 1523-1541
  
• Xiaowei Wang, Li Guo, Wei Ge, Dexiang Tang, Jingsen Ma, Zhangyuan Yang, Jinghai Li:
  Parallel implementation of macro-scale pseudo-particle simulation for particle-fluid systems. 1543-1553
  
• Young Han Kim:
  Structural design of fully thermally coupled distillation columns using a semi-rigorous model. 1555-1559
  
• Cheng-Liang Chen, Ping-Sung Hung:
  Simultaneous synthesis of mass exchange networks for waste minimization. 1561-1576
  
• Grzegorz Ziomek, Dorota Antos:
  Stochastic optimization of simulated moving bed process: Sensitivity analysis for isocratic and gradient operation. 1577-1589
  
• János Madár, János Abonyi, Ferenc Szeifert:
  Interactive evolutionary computation in process engineering. 1591-1597
  
• Éva Orbán-Mihálykó, Béla G. Lakatos:
  Sizing of pipeline capacities in processing systems under stochastic operation conditions. 1599-1612
  
• H. O. Méndez-Acosta, Daniel U. Campos-Delgado, R. Femat, V. González-Alvarez:
  A robust feedforward/feedback control for an anaerobic digester. 1613-1623
  
• Sathe Vivek, M. Chidambaram:
  Identification using single symmetrical relay feedback test. 1625-1630
  
• Thokozani Majozi:
  Wastewater minimisation using central reusable water storage in batch plants. 1631-1646
  
• Stavros Papadokonstantakis, Stephan Machefer, Klaus Schnitzlein, Argyrios I. Lygeros:
  Variable selection and data pre-processing in NN modelling of complex chemical processes. 1647-1659
  
• Rafiqul Gani, Concepción Jiménez-González, David J. C. Constable:
  Method for selection of solvents for promotion of organic reactions. 1661-1676
  
• G. Padmavathi, M. G. Mandan, S. P. Mitra, K. K. Chaudhuri:
  Neural modelling of Mooney viscosity of polybutadiene rubber. 1677-1685
  
• M. M. Miladi, I. M. Mujtaba:
  The effect of off-cut recycle on the optimum design and operation of binary batch distillation with fixed product demand. 1687-1695
  

Volume 29, Number 8, July 2005

• Gintaras V. Reklaitis:
  Editorial note - Best paper of 2003. 1697-1698
  
• Anita Kovac Kralj, Peter Glavic, Zdravko Kravanja:
  Heat integration between processes: Integrated structure and MINLP model. 1699-1711
  
• Manish K. Singh, Tamal Banerjee, Ashok Khanna:
  Genetic algorithm to estimate interaction parameters of multicomponent systems for liquid-liquid equilibria. 1712-1719
  
• Roland England, Susana Gómez, René Lamour:
  Expressing optimal control problems as differential algebraic equations. 1720-1730
  
• Martin Schlegel, Klaus Stockmann, Thomas Binder, Wolfgang Marquardt:
  Dynamic optimization using adaptive control vector parameterization. 1731-1751
  
• Rainer E. Burkard, Johannes Hatzl:
  Review, extensions and computational comparison of MILP formulations for scheduling of batch processes. 1752-1769
  
• Laurent Cavin, Ulrich Fischer, Andrej Mosat, Konrad Hungerbühler:
  Batch process optimization in a multipurpose plant using Tabu Search with a design-space diversification. 1770-1786
  
• Shivakumar Kameswaran, Lorenz T. Biegler, George H. Staus:
  Dynamic optimization for the core-flooding problem in reservoir engineering. 1787-1800
  
• Aizhong Lei, WeiGuo Xu, DaiPing Hu, HuiZhang Shen:
  Explicit internal signal stochastic resonance and mechanic of noise-resistance in a chemical oscillator. 1801-1804
  
• Saadet Ulas, Urmila M. Diwekar, Mark A. Stadtherr:
  Uncertainties in parameter estimation and optimal control in batch distillation. 1805-1814
  
• John D. Siirola, Steinar Hauan:
  RPI: A remote process interface library for distributed clusters. 1815-1821
  
• Yi-Feng Wang, Hung-Hsiang Chou, Chuei-Tin Chang:
  Generation of batch operating procedures for multiple material-transfer tasks with Petri nets. 1822-1836
  
• Oscar A. Ortiz, Graciela I. Suárez, Aros Nelson:
  Dynamic simulation of a pilot rotary kiln for charcoal activation. 1837-1848
  
• Cong Xu, Peter M. Follmann, Lorenz T. Biegler, Myung S. Jhon:
  Numerical simulation and optimization of a direct methanol fuel cell. 1849-1860
  
• A. I. A. Salama:
  Numerical techniques for determining heat energy targets in pinch analysis. 1861-1866
  

Volume 29, Number 9, August 2005

• Mohammad Haeri, Hossein Zadehmorshed Beik:
  Application of extended DMC for nonlinear MIMO systems. 1867-1874
  
• Marcelo F. Alfradique, Marcelo Castier:
  Modeling and simulation of reactive distillation columns using computer algebra. 1875-1884
  
• M. D. Gordillo, M. A. Blanco, C. Pereyra, E. J. Martínez de la Ossa:
  Thermodynamic modelling of supercritical fluid-solid phase equilibrium data. 1885-1890
  
• Nicolas W. Sawaya, Ignacio E. Grossmann:
  A cutting plane method for solving linear generalized disjunctive programming problems. 1891-1913
  
• María Lorena Bergamini, Pío A. Aguirre, Ignacio E. Grossmann:
  Logic-based outer approximation for globally optimal synthesis of process networks. 1914-1933
  
• Kevin Alam, Musa R. Kamal:
  A robust optimization of injection molding runner balancing. 1934-1944
  
• Andrés F. Barbaro, Miguel J. Bagajewicz:
  New rigorous one-step MILP formulation for heat exchanger network synthesis. 1945-1976
  
• Chandan Guria, Prashant K. Bhattacharya, Santosh K. Gupta:
  Multi-objective optimization of reverse osmosis desalination units using different adaptations of the non-dominated sorting genetic algorithm (NSGA). 1977-1995
  
• G. Weidl, A. L. Madsen, S. Israelson:
  Applications of object-oriented Bayesian networks for condition monitoring, root cause analysis and decision support on operation of complex continuous processes. 1996-2009
  
• Wenkai Li, Chi-Wai Hui, AnXue Li:
  Integrating CDU, FCC and product blending models into refinery planning. 2010-2028
  
• T. Majozi, X. X. (Frank) Zhu:
  A combined fuzzy set theory and MILP approach in integration of planning and scheduling of batch plants - Personnel evaluation and allocation. 2029-2047
  

Volume 29, Number 10, September 2005

• Rachel Mintz, Brent R. Young, William Y. Svrcek:
  Fuzzy logic modeling of surface ozone concentrations. 2049-2059
  
• Sathe Vivek, M. Chidambaram:
  An improved relay auto tuning of PID controllers for unstable FOPTD systems. 2060-2068
  
• John D. Hedengren, Thomas F. Edgar:
  Order reduction of large scale DAE models. 2069-2077
  
• Bing Zhang, Dezhao Chen, Weixiang Zhao:
  Iterative ant-colony algorithm and its application to dynamic optimization of chemical process. 2078-2086
  
• A. L. Ahmad, K. K. Lau, M. Z. Abu Bakar, S. R. Abd. Shukor:
  Integrated CFD simulation of concentration polarization in narrow membrane channel. 2087-2095
  
• Shoujun Bian, Suabtragool Khowinij, Michael A. Henson, Paul Belanger, Lawrence Megan:
  Compartmental modeling of high purity air separation columns. 2096-2109
  
• Wachira Daosud, Piyanuch Thitiyasook, Amornchai Arpornwichanop, Paisan Kittisupakorn, Mohamed Azlan Hussain:
  Neural network inverse model-based controller for the control of a steel pickling process. 2110-2119
  
• Y. L. Yeow, H. A. N. Doan, P. A. N. Doan, C. M. Pan:
  A computer-based method of studying backmixing with interstage deadtime in solvent extraction columns. 2120-2127
  
• Abhijit Kulkarni, Vaidyanathan K. Jayaraman, Bhaskar D. Kulkarni:
  Knowledge incorporated support vector machines to detect faults in Tennessee Eastman Process. 2128-2133
  
• A. Shahsavand, A. Ahmadpour:
  Application of optimal RBF neural networks for optimization and characterization of porous materials. 2134-2143
  
• Muataz A. Ali, Ahmad T. Jameel, Fakhru'l-Razi Ahmadun:
  Stability and rupture of nano-liquid film (NLF) flowing down an inclined plane. 2144-2154
  
• Fuping Qian, Mingyao Zhang:
  Study of the natural vortex length of a cyclone with response surface methodology. 2155-2162
  
• Rasmus H. Nyström, Rüdiger Franke, Iiro Harjunkoski, Andreas Kroll:
  Production campaign planning including grade transition sequencing and dynamic optimization. 2163-2179
  
• Tivadar Farkas, Endre Rev, Zoltan Lelkes:
  Process flowsheet superstructures: Structural multiplicity and redundancy: Part I: Basic GDP and MINLP representations. 2180-2197
  
• Tivadar Farkas, Endre Rev, Zoltan Lelkes:
  Process flowsheet superstructures: Structural multiplicity and redundancy: Part II: Ideal and binarily minimal MINLP representations. 2198-2214
  
• Mirjana Minceva, Alírio E. Rodrigues:
  Two-level optimization of an existing SMB for p-xylene separation. 2215-2228
  
• Caliane Bastos Borba Costa, Maria Regina Wolf Maciel, Rubens Maciel Filho:
  Factorial design technique applied to genetic algorithm parameters in a batch cooling crystallization optimisation. 2229-2241
  
• Weihua Gao, Sebastian Engell:
  Estimation of general nonlinear adsorption isotherms from chromatograms. 2242-2255
  
• P. Cruz, J. C. Santos, F. D. Magalhães, A. Mendes:
  "Comparison of finite difference and control volume methods for solving differential equations" by G.G. Botte, J.A. Ritter, R.E. White, 24 (2000) 2633-2654. 2256-2258
  
• G. G. Botte, J. A. Ritter, R. E. White:
  Response to letter written by: P. Cruz, J.C. Santos, F.D. Magalhaes, A. Mendes to "Comparison of finite difference and control volume methods for solving differential equations, by G.G. Botte, J.A. Ritter, R.E. White, 24 (2000) 2633-2654". 2259-2261
  
• Gintaras V. Reklaitis:
  Erratum to "Editorial note - Best paper of 2003" [Computers and Chemical Engineering 29 (8) (2005) 1697-1698]. 2262-2263
  

Volume 29, Numbers 11-12, October 2005

• Gilbert Froment, Mahmoud El-Halwagi, Juergen Hahn, M. Sam Mannan:
  Foreword. 2265
  
• Michael Nikolaou, Pratik Misra, Vincent H. Tam, Andrew D. Bailey III:
  Complexity in semiconductor manufacturing, activity of antimicrobial agents, and drilling of hydrocarbon wells: Common themes and case studies. 2266-2289
  
• Pinky Dua, Efstratios N. Pistikopoulos:
  Modelling and control of drug delivery systems. 2290-2296
  
• P. Ao:
  Metabolic network modelling: Including stochastic effects. 2297-2303
  
• Fadwa T. Eljack, Ahmed F. Abdelhady, Mario R. Eden, Frederico B. Gabriel, Xiaoyun Qin, Mahmoud M. El-Halwagi:
  Targeting optimum resource allocation using reverse problem formulations and property clustering techniques. 2304-2317
  
• Daniel Grooms, Vasiliki Kazantzi, Mahmoud El-Halwagi:
  Optimal synthesis and scheduling of hybrid dynamic/steady-state property integration networks. 2318-2325
  
• Abhay K. Singh, Juergen Hahn:
  State estimation for high-dimensional chemical processes. 2326-2334
  
• Stevan Dubljevic, Prashant Mhaskar, Nael H. El-Farra, Panagiotis D. Christofides:
  Predictive control of transport-reaction processes. 2335-2345
  
• Nikolaos Kazantzis, Nguyen Huynh, Theresa A. Good:
  A model-based characterization of the long-term asymptotic behavior of nonlinear discrete-time processes using invariance functional equations. 2346-2354
  
• Uwe Kruger, David Antory, Juergen Hahn, George W. Irwin, Geoffrey McCullough:
  Introduction of a nonlinearity measure for principal component models. 2355-2362
  
• Angelo Lucia, Peter A. DiMaggio, Meghan L. Bellows, Leah M. Octavio:
  The phase behavior of n-alkane systems. 2363-2379
  
• Qi Sun, Roland Faller:
  Systematic coarse-graining of atomistic models for simulation of polymeric systems. 2380-2385
  
• Richard Farmer, Ralph Pike, Gary Cheng:
  CFD analyses of complex flows. 2386-2403
  
• Roberto Galiasso Tailleur:
  Effect of catalyst deactivation on mild hydrocracking reactions. 2404-2419
  
• V. S. Shabde, S. V. Emets, U. Mann, K. A. Hoo, N. N. Carlson, G. M. Gladysz:
  Modeling a hollow micro-particle production process. 2420-2428
  
• Young-Pyo Jeon, Ben J. McCoy:
  Distribution dynamics of evolving networks. 2429-2437
  
• Hiroshi Nogami, Mansheng Chu, Jun-ichiro Yagi:
  Multi-dimensional transient mathematical simulator of blast furnace process based on multi-fluid and kinetic theories. 2438-2448
  
• Maria Papadaki, Jun Gao:
  Kinetic models of complex reaction systems. 2449-2460
  
• Abhijart Kongto, Sunun Limtrakul, Kanokwan Ngaowsuwan, Palghat A. Ramachandran, Terdthai Vatanatham:
  Mathematical modeling and simulation for gas-liquid reactors. 2461-2473
  
• Jianhua Wang, Rayford G. Anthony, Aydin Akgerman:
  Mathematical simulations of the performance of trickle bed and slurry reactors for methanol synthesis. 2474-2484
  
• Delba N. C. Melo, Eduardo C. Vasco De Toledo, Marcela M. Santos, Salah D. M. Hasan, Maria Regina Wolf Maciel, Rubens Maciel Filho:
  Off-line optimization and control for real time integration of a three-phase hydrogenation catalytic reactor. 2485-2493