Computers & Chemical Engineering, Volume 31

Volume 31, Number 1, November 2006

• Dongmei Zhai, Derrick K. Rollins Sr., Nidhi Bhandari, Huaiqing Wu:
  Continuous-time Hammerstein and Wiener modeling under second-order static nonlinearity for periodic process signals. 1-12
  
• Min Han, Bing Han, Jianhui Xi, Kotaro Hirasawa:
  Universal learning network and its application for nonlinear system with long time delay. 13-20
  
• Yang Chen, Gou Xiaolong:
  Dynamic modeling and simulation of a 410 t/h Pyroflow CFB boiler. 21-31
  
• K.-H. Sun, D. L. Pyle, Alistair D. Fitt, Colin P. Please:
  Heat transfer in lid driven channels with power law fluids in a hydrodynamic fully developed flow field. 32-40
  
• Ioannis P. Androulakis:
  New approaches for representing, analyzing and visualizing complex kinetic transformations. 41-50
  

Volume 31, Number 2, December 2006

• M. Häfele, A. Kienle, M. Boll, C.-U. Schmidt:
  Modeling and analysis of a plant for the production of low density polyethylene. 51-65
  
• Rosario Toscano, Patrick Lyonnet:
  Robustness analysis and synthesis of a multi-PID controller based on an uncertain multimodel representation. 66-77
  
• E. Morel, B. Tartakovsky, S. R. Guiot, Michel Perrier:
  Design of a multi-model observer-based estimator for anaerobic reactor monitoring. 78-85
  
• S. Y. Yim, H. G. Ananthakumar, Lamia Benabbas, A. Horch, R. Drath, Nina F. Thornhill:
  Using process topology in plant-wide control loop performance assessment. 86-99
  

Volume 31, Number 3, January 2007

• Jun-Hyung Ryu, Efstratios N. Pistikopoulos:
  A novel approach to scheduling of zero-wait batch processes under processing time variations. 101-106
  
• Amit Goyal, Shailaja Mandapuram, Bozena Michniak, Laurent Simon:
  Application of orthogonal collocation and regression techniques for recovering parameters of a two-pathway transdermal drug-delivery model. 107-120
  
• Chunyang Wei, William J. Rogers, M. Sam Mannan:
  Application of runaway reaction mechanism generation to predict and control reactive hazards. 121-126
  
• Shuanghua Bai, David D. McLean, Jules Thibault:
  Impact of model structure on the performance of dynamic data reconciliation. 127-135
  
• V. Ibarra-Junquera, H. C. Rosu:
  PI-controlled bioreactor as a generalized Liénard system. 136-141
  
• Bojan Likar, Jus Kocijan:
  Predictive control of a gas-liquid separation plant based on a Gaussian process model. 142-152
  
• Yiqing Luo, Xigang Yuan, Yongjian Liu:
  An improved PSO algorithm for solving non-convex NLP/MINLP problems with equality constraints. 153-162
  
• Siris Ö. Laursen, Daniel Webb, W. Fred Ramirez:
  Dynamic hybrid neural network model of an industrial fed-batch fermentation process to produce foreign protein. 163-170
  
• Stacy L. Janak, Xiaoxia Lin, Christodoulos A. Floudas:
  A new robust optimization approach for scheduling under uncertainty: II. Uncertainty with known probability distribution. 171-195
  
• V. Grosfils, C. Levrie, M. Kinnaert, A. Vande Wouwer:
  On simplified modelling approaches to SMB processes. 196-205
  
• Caliane Bastos Borba Costa, Maria Regina Wolf Maciel, Rubens Maciel Filho:
  Considerations on the crystallization modeling: Population balance solution. 206-218
  
• Ervina Widjaja, Nai-Chi Liu, Mingfeng Li, Robert T. Collins, Osman A. Basaran, Michael T. Harris:
  Dynamics of sessile droplet evaporation: A comparison of the spine and the elliptic mesh generation methods. 219-232
  
• I-Lung Chien, Tze Wei Kan, Bo-Shuo Chen:
  Dynamic simulation and operation of a high pressure ethylene-vinyl acetate (EVA) copolymerization autoclave reactor. 233-245
  

Volume 31, Number 4, February 2007

• C. H. Cheng, K. Fei, C. W. Hong:
  Computer simulation of hydrogen proton exchange membrane and direct methanol fuel cells. 247-257
  
• R. Lübke, Andreas Seidel-Morgenstern, L. Tobiska:
  Numerical method for accelerated calculation of cyclic steady state of ModiCon-SMB-processes. 258-267
  
• Zhenya Jia, Marianthi G. Ierapetritou:
  Generate Pareto optimal solutions of scheduling problems using normal boundary intersection technique. 268-280
  
• R. Lepore, A. Vande Wouwer, Marcel Remy, Rolf Findeisen, Z. Nagy, Frank Allgöwer:
  Optimization strategies for a MMA polymerization reactor. 281-291
  
• B. Liu, R. E. Hayes, Y. Yi, J. P. Mmbaga, M. D. Checkel, M. Zheng:
  Three dimensional modelling of methane ignition in a reverse flow catalytic converter. 292-306
  
• Jonas Sjöblom, Derek Creaser:
  New approach for microkinetic mean-field modelling using latent variables. 307-317
  
• P. Rattanadecho, S. Wongwises:
  Simulation of freezing of water-saturated porous media in a rectangular cavity under multiple heat sources with different temperature using a combined transfinite interpolation and PDE methods. 318-333
  
• Louis Fradette, Philippe A. Tanguy, François Bertrand, Francis Thibault, Jean-Benoît Ritz, Eric Giraud:
  CFD phenomenological model of solid-liquid mixing in stirred vessels. 334-345
  
• N. S. Wijeratne, K. A. Hoo:
  An analytical approach to identify fluid flow separation and re-attachment in a collapsible channel. 346-360
  
• Pedro V. Lima, Pedro M. Saraiva:
  A semi-mechanistic model building framework based on selective and localized model extensions. 361-373
  
• T. Sainio, E. Paatero:
  Mass coordinates for dynamic simulation of column operations involving dimensional changes of packing material. 374-383
  

• Lyne Woodward, Bala Srinivasan, B. Robitaille, Michel Perrier:
  Real-time optimization of an off-gas distribution system of an iron and titanium plant. 384-389
  

Volume 31, Numbers 5-6, May 2007

• Luis Puigjaner:
  Preface. 391
  
• Cleo Kontoravdi, Steven P. Asprey, Efstratios N. Pistikopoulos, Athanasios Mantalaris:
  Development of a dynamic model of monoclonal antibody production and glycosylation for product quality monitoring. 392-400
  
• Sergio Ferrer-Nadal, Ignacio Yélamos-Ruiz, Moisès Graells, Luis Puigjaner:
  An integrated framework for on-line supervised optimization. 401-409
  
• F. Y. Wang, Parisa A. Bahri, Peter L. Lee, I. T. Cameron:
  A multiple model, state feedback strategy for robust control of non-linear processes. 410-418
  
• Bao Lin, Bodil Recke, Jørgen K. H. Knudsen, Sten Bay Jørgensen:
  A systematic approach for soft sensor development. 419-425
  
• Michael Baldea, Prodromos Daoutidis:
  Control of integrated process networks - A multi-time scale perspective. 426-444
  
• Jiri Klemes, Igor Bulatov, Tim Cockerill:
  Techno-economic modelling and cost functions of CO₂ capture processes. 445-455
  
• M. Fresnedo San Román, Eugenio Bringas, Inmaculada Ortiz, Ignacio E. Grossmann:
  Optimal synthesis of an emulsion pertraction process for the removal of pollutant anions in industrial wastewater systems. 456-465
  
• Eddie Davis, Marianthi G. Ierapetritou:
  Adaptive optimisation of noisy black-box functions inherent in microscopic models. 466-476
  
• Rachid A. Ghraizi, Ernesto Martínez, César de Prada, Francisco Cifuentes, José Luis Martínez del Pozo:
  Performance monitoring of industrial controllers based on the predictability of controller behavior. 477-486
  
• Jordi Bonet, Raphaële Thery, Xuan-Mi Meyer, Michel Meyer, Jean-Michel Reneaume, Maria-Isabel Galan, José Costa:
  Infinite/infinite analysis as a tool for an early oriented synthesis of a reactive pressure swing distillation. 487-495
  
• Arief Adhitya, Rajagopalan Srinivasan, Iftekhar A. Karimi:
  A model-based rescheduling framework for managing abnormal supply chain events. 496-518
  
• Rafael Batres, Matthew West, David Leal, David Price, Katsube Masaki, Yukiyasu Shimada, Tetsuo Fuchino, Yuji Naka:
  An upper ontology based on ISO 15926. 519-534
  
• J. Sadhukhan, R. Smith:
  Synthesis of industrial systems based on value analysis. 535-551
  
• Sachin Arora, Ralf Gesthuisen, Sebastian Engell:
  Model based operation of emulsion polymerization reactors with evaporative cooling: Application to vinyl acetate homopolymerization. 552-564
  
• Vicente Rico-Ramírez, Sergio Frausto-Hernández, Urmila M. Diwekar, Salvador Hernández-Castro:
  Water networks security: A two-stage mixed-integer stochastic program for sensor placement under uncertainty. 565-573
  
• Jan Busch, Jan Oldenburg, Marcella Santos, Andreas Cruse, Wolfgang Marquardt:
  Dynamic predictive scheduling of operational strategies for continuous processes using mixed-logic dynamic optimization. 574-587
  
• Antonio Flores-Tlacuahuac, Lorenz T. Biegler:
  Simultaneous mixed-integer dynamic optimization for integrated design and control. 588-600
  
• Anton A. Kiss, Costin Sorin Bildea, Alexandre C. Dimian:
  Design and control of recycle systems by non-linear analysis. 601-611
  
• Richard J. Barnes, Antonis Kokossis, Zhigang Shang:
  An integrated mathematical programming approach for the design and optimisation of offshore fields. 612-629
  
• Jochen Till, Guido Sand, Maren Urselmann, Sebastian Engell:
  A hybrid evolutionary algorithm for solving two-stage stochastic integer programs in chemical batch scheduling. 630-647
  
• Ana M. Eliceche, Sergio M. Corvalán, Pablo Martínez:
  Environmental life cycle impact as a tool for process optimisation of a utility plant. 648-656
  
• N. Irsic Bedenik, M. Ropotar, Zdravko Kravanja:
  MINLP synthesis of reactor networks in overall process schemes based on a concept of time-dependent economic regions. 657-676
  
• Luis T. Antelo, Irene Otero-Muras, Julio R. Banga, Antonio A. Alonso:
  A systematic approach to plant-wide control based on thermodynamics. 677-691
  
• Vishal A. Varma, Gintaras V. Reklaitis, Gary Blau, Joseph F. Pekny:
  Enterprise-wide modeling & optimization - An overview of emerging research challenges and opportunities. 692-711
  
• Jørgen Bauck Jensen, Sigurd Skogestad:
  Optimal operation of simple refrigeration cycles: Part I: Degrees of freedom and optimality of sub-cooling. 712-721
  
• Fernando D. Mele, Gonzalo Guillén, Antonio Espuña Camarasa, Luis Puigjaner:
  An agent-based approach for supply chain retrofitting under uncertainty. 722-735
  

Volume 31, Number 7, July 2007

• Masoud Rahimi, Arsalan Parvareh:
  CFD study on mixing by coupled jet-impeller mixers in a large crude oil storage tank. 737-744
  
• Jürgen Koch, Wolfgang Hackbusch, Kai Sundmacher:
  H-matrix methods for linear and quasi-linear integral operators appearing in population balances. 745-759
  
• Mekapati Srinivas, G. P. Rangaiah:
  A study of differential evolution and tabu search for benchmark, phase equilibrium and phase stability problems. 760-772
  
• Massimiliano Errico, Sara Maccioni, Giuseppe Tola, Paola Zuddas:
  A deterministic algorithm for the synthesis of maximum energy recovery heat exchanger network. 773-781
  
• Paulo L. C. Lage:
  The quadrature method of moments for continuous thermodynamics. 782-799
  
• B. A. Souza, E. M. Matos, L. T. Furlan, J. R. Nunhez:
  A simple two-dimensional method for orthogonal and nonorthogonal grid generation. 800-807
  
• Liexiang Yan, I. D. L. Bogle:
  A visualization method for operating optimization. 808-814
  
• Antoine Berton, Daniel Hodouin:
  Synchronized node imbalances for fault detection and isolation in plant networks involving material circulation. 815-832
  
• Ana Paula F. D. Barbosa-Póvoa:
  A critical review on the design and retrofit of batch plants. 833-855
  
• Nicolas W. Sawaya, Ignacio E. Grossmann:
  Computational implementation of non-linear convex hull reformulation. 856-866
  
• Juan Gabriel Segovia-Hernández, Esteban Abelardo Hernández-Vargas, Jorge Alberto Márquez-Muñoz:
  Control properties of thermally coupled distillation sequences for different operating conditions. 867-874
  

Volume 31, Number 8, August 2007

• David Bogle, Rafiqul Gani:
  Selected papers from the 7th World Congress of Chemical Engineering, Glasgow, July 2005. 875
  
• Lauren Basson, Jim G. Petrie:
  A critical systems approach to decision support for process engineering. 876-888
  
• Edmund George, Nigel John Titchener-Hooker, Suzanne S. Farid:
  A multi-criteria decision-making framework for the selection of strategies for acquiring biopharmaceutical manufacturing capacity. 889-901
  
• Ivan López-Arévalo, René Bañares-Alcántara, Arantza Aldea, A. Rodríguez-Martínez, Laureano Jiménez:
  Generation of process alternatives using abstract models and case-based reasoning. 902-918
  
• Steven L. McGahey, Ian T. Cameron:
  A multi-model repository with manipulation and analysis tools. 919-930
  
• Y.-D. Lang, Lorenz T. Biegler:
  A software environment for simultaneous dynamic optimization. 931-942
  
• Sophia Tsoka:
  Computational methodologies for genome evolution and functional association. 943-949
  
• Rishi R. Gupta, Luke E. K. Achenie:
  A network model for gene regulation. 950-961
  
• James Hetherington, Ian David Lockhart Bogle, Peter Saffrey, Ofer Margoninski, Linzhong Li, Marta Varela-Rey, Sachie Yamaji, Stephen Baigent, Jonathan Ashmore, K. Page, Robert M. Seymour, Anthony Finkelstein, Anne Warner:
  Addressing the challenges of multiscale model management in systems biology. 962-979
  
• Philippe Mandin, J. M. Cense, C. Fabian, C. Gbado, D. Lincot:
  Electrodeposition process modeling using continuous and discrete scales. 980-992
  
• C. Ryan Gwaltney, Mark A. Stadtherr:
  Reliable computation of equilibrium states and bifurcations in ecological systems analysis. 993-1005
  

Volume 31, Number 9, September 2007

• Chi-Kan Chen, Tai-Chih Kuo:
  Simulations of SELEX against complex receptors with a condensed statistical model. 1007-1019
  
• Kevin M. Van Geem, Damien Hudebine, Marie Françoise Reyniers, François Wahl, Jan J. Verstraete, Guy B. Marin:
  Molecular reconstruction of naphtha steam cracking feedstocks based on commercial indices. 1020-1034
  
• Masayuki Tamura, Shinsuke Tsujita:
  A study on the number of principal components and sensitivity of fault detection using PCA. 1035-1046
  
• M. R. Breach, N. Ansari:
  Modeling non-ideal vapor-liquid phase equilibrium, mass and energy transfer in a binary system via augmentation of computational fluid dynamical methods. 1047-1054
  
• Rakesh Angira, Alladwar Santosh:
  Optimization of dynamic systems: A trigonometric differential evolution approach. 1055-1063
  
• Z. F. Tian, J. Y. Tu, G. H. Yeoh:
  Numerical modelling and validation of gas-particle flow in an in-line tube bank. 1064-1072
  
• Roque J. Minari, Luis M. Gugliotta, Jorge R. Vega, Gregorio R. Meira:
  Continuous emulsion copolymerization of acrylonitrile and butadiene: Computer simulation study for improving the rubber quality and increasing production. 1073-1080
  
• Vishal Goyal, Marianthi G. Ierapetritou:
  Stochastic MINLP optimization using simplicial approximation. 1081-1087
  
• N. Reuge, B. Caussat:
  A dimensionless study of the evaporation and drying stages in spray pyrolysis. 1088-1099
  
• Mykhaylo Krasnyk, Martin Ginkel, Michael Mangold, A. Kienle:
  Numerical analysis of higher order singularities in chemical process models. 1100-1110
  
• Fuping Qian, Zhijia Huang, Guang Chen, Mingyao Zhang:
  Numerical study of the separation characteristics in a cyclone of different inlet particle concentrations. 1111-1122
  
• Alan R. Katritzky, Svetoslav H. Slavov, Dimitar A. Dobchev, Mati Karelson:
  Rapid QSPR model development technique for prediction of vapor pressure of organic compounds. 1123-1130
  
• Catalina Valencia, Gabriela Espinosa, Jaume Giralt, Francesc Giralt:
  Optimization of invertase production in a fed-batch bioreactor using simulation based dynamic programming coupled with a neural classifier. 1131-1140
  
• Suzanne S. Farid, John Washbrook, Nigel John Titchener-Hooker:
  Modelling biopharmaceutical manufacture: Design and implementation of SimBiopharma. 1141-1158
  
• Marta Susana Moreno, Jorge Marcelo Montagna, Oscar A. Iribarren:
  Multiperiod optimization for the design and planning of multiproduct batch plants. 1159-1173
  
• Mario Oyanader, Pedro Arce:
  An effective analytical-algorithmic approach to solve diffusion-type differential equations with non-linear sources: Unbounded domains. 1174-1180
  
• Sebastian Sager, Ulrich Brandt-Pollmann, Moritz Diehl, Dirk Lebiedz, Hans Georg Bock:
  Exploiting system homogeneities in large scale optimal control problems for speedup of multiple shooting based SQP methods. 1181-1186
  

Volume 31, Number 10, October 2007

• S. Bhatia, A. R. Mohamed, A. L. Ahmad, S. Y. Chin:
  Production of isopropyl palmitate in a catalytic distillation column: Comparison between experimental and simulation studies. 1187-1198
  
• Ayla Altinten:
  Generalized predictive control applied to a pH neutralization process. 1199-1204
  
• Tatsushi Nishi, Masami Konishi, Masatoshi Ago:
  A distributed decision making system for integrated optimization of production scheduling and distribution for aluminum production line. 1205-1221
  
• Philip de Vaal, Carl Sandrock:
  Control of a batch pulp digester using a simplified mechanistic model to predict degree of polymerisation. 1222-1230
  
• Gheorghe Maria:
  Model-based heuristic optimized operating policies for d-glucose oxidation in a batch reactor with pulsate addition of enzyme. 1231-1241
  
• Mark A. Pinto, Charles D. Immanuel, Francis J. Doyle III:
  A feasible solution technique for higher-dimensional population balance models. 1242-1256
  
• A. Tarafder, G. P. Rangaiah, Ajay K. Ray:
  A study of finding many desirable solutions in multiobjective optimization of chemical processes. 1257-1271
  
• T. Y. Pai, Y. P. Tsai, H. M. Lo, C. H. Tsai, C. Y. Lin:
  Grey and neural network prediction of suspended solids and chemical oxygen demand in hospital wastewater treatment plant effluent. 1272-1281
  
• B. Sankararao, Santosh K. Gupta:
  Modeling and simulation of fixed bed adsorbers (FBAs) for multi-component gaseous separations. 1282-1295
  
• Shamsul Qamar, A. Ashfaq, Gerald Warnecke, I. A. Angelov, M. P. Elsner, Andreas Seidel-Morgenstern:
  Adaptive high-resolution schemes for multidimensional population balances in crystallization processes. 1296-1311
  
• John D. Siirola, Steinar Hauan:
  Polymorphic optimization. 1312-1325
  
• P. Gómez, R. Aldaco, R. Ibáñez, I. Ortiz:
  Modeling of pervaporation processes controlled by concentration polarization. 1326-1335
  
• M. Petryk, E. Vorobiev:
  Liquid flowing from porous particles during the pressing of biological materials. 1336-1345
  
• M. Gadalla, Laureano Jiménez, Z. Olujic, P. J. Jansens:
  A thermo-hydraulic approach to conceptual design of an internally heat-integrated distillation column (i-HIDiC). 1346-1354
  
• Raymond R. Tan, Dominic C. Y. Foo, Zainuddin A. Manan:
  Assessing the sensitivity of water networks to noisy mass loads using Monte Carlo simulation. 1355-1363
  
• Mohammad Danish, Arees Qamareen, Shashi Kumar, Surendra Kumar:
  Letter to the Editor. 1364-1365
  
• Elisaveta G. Shopova, Natasha G. Vaklieva-Bancheva:
  Author's reply. 1366-1367
  

Volume 31, Number 11, November 2007

• J. Petera, L. R. Weatherley, A. P. Hume, T. Gawrysiak:
  A finite element algorithm for particle/droplet trajectory tracking, tested in a liquid-liquid system in the presence of an external electric field. 1369-1388
  
• A. Habibi, B. Merci, Geraldine J. Heynderickx:
  Impact of radiation models in CFD simulations of steam cracking furnaces. 1389-1406
  
• Shunliang Jiang, Zhiguo Wang, Goufa Zhou, Weimin Yang:
  An implicit control-volume finite element method and its time step strategies for injection molding simulation. 1407-1418
  
• Antonio Gómez, Norberto Fueyo, Alfredo Tomás:
  Detailed modelling of a flue-gas desulfurisation plant. 1419-1431
  
• M. A. S. S. Ravagnani, J. A. Caballero:
  Optimal heat exchanger network synthesis with the detailed heat transfer equipment design. 1432-1448
  
• Aline Grosfils, A. Vande Wouwer, Philippe Bogaerts:
  Systematic decoupled identification of pseudo-stoichiometry, degradation rates and kinetics. 1449-1455
  
• Alessandra Adrover, F. Creta, Stefano Cerbelli, Massimiliano Valorani, Massimiliano Giona:
  The structure of slow invariant manifolds and their bifurcational routes in chemical kinetic models. 1456-1474
  
• Q. T. Pham:
  Using statistical analysis to tune an evolutionary algorithm for dynamic optimization with progressive step reduction. 1475-1483
  
• Ashish Jindal, Saswati Pujari, P. Sandilya, Saibal Ganguly:
  A reduced order thermo-chemical model for blast furnace for real time simulation. 1484-1495
  
• B. Sankararao, Santosh K. Gupta:
  Multi-objective optimization of an industrial fluidized-bed catalytic cracking unit (FCCU) using two jumping gene adaptations of simulated annealing. 1496-1515
  
• Liulin Cao, Dazi Li, Chunyu Zhang, Haiyan Wu:
  Control and modeling of temperature distribution in a tubular polymerization process. 1516-1524
  
• Utz-Uwe Haus, Dennis Michaels, Andreas Seidel-Morgenstern, Robert Weismantel:
  A method to evaluate the feasibility of TMB chromatography for reduced efficiency and purity requirements based on discrete optimization. 1525-1534
  
• Jignesh Gangadwala, Gabriel Radulescu, Achim Kienle, Kai Sundmacher:
  Computer aided design of reactive distillation processes for the treatment of waste waters polluted with acetic acid. 1535-1547
  

Volume 31, Number 12, December 2007

• Gintaras V. Reklaitis:
  Computers and chemical engineering: Best paper of 2004. 1549-1551
  
• Gorazd Karer, Gasper Music, Igor Skrjanc, Borut Zupancic:
  Hybrid fuzzy model-based predictive control of temperature in a batch reactor. 1552-1564
  
• Kai Cao, Xiao Feng, Hang Ma:
  Pinch multi-agent genetic algorithm for optimizing water-using networks. 1565-1575
  
• Shamsul Qamar, Gerald Warnecke:
  Numerical solution of population balance equations for nucleation, growth and aggregation processes. 1576-1589
  
• Jørgen Bauck Jensen, Sigurd Skogestad:
  Optimal operation of simple refrigeration cycles: Part II: Selection of controlled variables. 1590-1601
  
• Jili Tao, Ning Wang:
  DNA computing based RNA genetic algorithm with applications in parameter estimation of chemical engineering processes. 1602-1618
  
• Cheng-Liang Chen, Ping-Sung Hung:
  Synthesis of flexible heat exchange networks and mass exchange networks. 1619-1632
  
• Chiou Peng Lam, Huaizhong Li, Dong Xu:
  A model-centric approach for the management of model evolution in chemical process modelling. 1633-1662
  
• Edgar Salgado, Juan Aranda:
  An agent-based solution of Lagrange equations for adsorption processes. 1663-1670
  
• Yu Liu, I. A. Karimi:
  Novel continuous-time formulations for scheduling multi-stage batch plants with identical parallel units. 1671-1693
  
• C. Morales, H. Elman, A. Pérez:
  Modeling and simulation of a liquid extraction column with structured packing. 1694-1701
  
• Joakim Westerlund, Lazaros G. Papageorgiou, Tapio Westerlund:
  A MILP model for N-dimensional allocation. 1702-1714
  
• R. Caulkin, A. Ahmad, M. Fairweather, X. Jia, R. A. Williams:
  An investigation of sphere packed shell-side columns using a digital packing algorithm. 1715-1724
  

Last update Sun May 19 23:57:26 2013 CET by the DBLP Team — Data released under the ODC-BY 1.0 license — See also our legal information page