Computers & Chemical Engineering, Volume 32

Volume 32, Numbers 1-2, January 2008

• Wolfgang Marquardt, Costas C. Pantelides:
  Preface. 1-2
  
• Jacob A. Moulijn, Andrzej Stankiewicz, Johan Grievink, Andrzej Górak:
  Process intensification and process systems engineering: A friendly symbiosis. 3-11
  
• Manabu Kano, Yoshiaki Nakagawa:
  Data-based process monitoring, process control, and quality improvement: Recent developments and applications in steel industry. 12-24
  
• Pu Li, Harvey Arellano-Garcia, Günter Wozny:
  Chance constrained programming approach to process optimization under uncertainty. 25-45
  
• Marta Dueñas Díez, B. Erik Ydstie, Magne Fjeld, Bernt Lie:
  Inventory control of particulate processes. 46-67
  
• António Roldão, Manuel J. T. Carrondo, Paula M. Alves, Rui Oliveira:
  Stochastic simulation of protein expression in the baculovirus/insect cells system. 68-77
  
• Fadime Üney Yüksektepe, Özlem Yilmaz, Metin Türkay:
  Prediction of secondary structures of proteins using a two-stage method. 78-88
  
• Mahadevabharath R. Somayaji, Michalis Xenos, Libin Zhang, Megan Mekarski, Andreas A. Linninger:
  Systematic design of drug delivery therapies. 89-98
  
• Pinky Dua, Vivek Dua, Efstratios N. Pistikopoulos:
  Optimal delivery of chemotherapeutic agents in cancer. 99-107
  
• Dieter Bothe, Carsten Stemich, Hans-Joachim Warnecke:
  Computation of scales and quality of mixing in a T-shaped microreactor. 108-114
  
• André Bardow:
  Optimal experimental design of ill-posed problems: The METER approach. 115-124
  
• Libor Seda, Juraj Kosek:
  Predictive modeling of ionic permselectivity of porous media. 125-134
  
• Yoshiaki Kawajiri, Lorenz T. Biegler:
  Large scale optimization strategies for zone configuration of simulated moving beds. 135-144
  
• Ramkumar Karuppiah, Ignacio E. Grossmann:
  Global optimization of multiscenario mixed integer nonlinear programming models arising in the synthesis of integrated water networks under uncertainty. 145-160
  
• Harvey Arellano-Garcia, Irisay Carmona, Günter Wozny:
  A new operation mode for reactive batch distillation in middle-vessel columns: Start-up and operation. 161-169
  
• Sandra R. Micheletto, Maria C. A. Carvalho, José M. Pinto:
  Operational optimization of the utility system of an oil refinery. 170-185
  
• Hidekazu Kugemoto, Keita Ozaki, Yoshinori Kutsuwa, Yoshihiro Hashimoto:
  Optimal current distribution control for parallel electrolytic baths. 186-194
  
• Elvira Marie B. Aske, Stig Strand, Sigurd Skogestad:
  Coordinator MPC for maximizing plant throughput. 195-204
  
• Koen H. van Dam, Michiel Houwing, Zofia Lukszo, Ivo Bouwmans:
  Agent-based control of distributed electricity generation with micro combined heat and power - Cross-sectoral learning for process and infrastructure engineers. 205-217
  
• Ranganathan Srinivasan, Raghunathan Rengaswamy:
  Approaches for efficient stiction compensation in process control valves. 218-229
  
• Xuan-Tien Doan, Rajagopalan Srinivasan:
  Online monitoring of multi-phase batch processes using phase-based multivariate statistical process control. 230-243
  
• Charles Sung, Christos T. Maravelias:
  A mixed-integer programming formulation for the general capacitated lot-sizing problem. 244-259
  
• Munawar A. Shaik, Christodoulos A. Floudas:
  Unit-specific event-based continuous-time approach for short-term scheduling of batch plants using RTN framework. 260-274
  
• Sebastian Panek, Sebastian Engell, Subanatarajan Subbiah, Olaf Stursberg:
  Scheduling of multi-product batch plants based upon timed automata models. 275-291
  
• Adrian Dietz, Alberto A. Aguilar-Lasserre, Catherine Azzaro-Pantel, Luc Pibouleau, Serge Domenech:
  A fuzzy multiobjective algorithm for multiproduct batch plant: Application to protein production. 292-306
  
• Juan Camilo Zapata, Vishal A. Varma, Gintaras V. Reklaitis:
  Impact of tactical and operational policies in the selection of a new product portfolio. 307-319
  
• Sebastian C. Brandt, Jan Morbach, Michalis Miatidis, Manfred Theißen, Matthias Jarke, Wolfgang Marquardt:
  An ontology-based approach to knowledge management in design processes. 320-342
  
• Jignesh Gangadwala, Utz-Uwe Haus, Matthias Jach, Achim Kienle, Dennis Michaels, Robert Weismantel:
  Global analysis of combined reaction distillation processes. 343-355
  
• Eric Yang, Timothy Maguire, Martin L. Yarmush, Francois Berthiaume, Francois P. Androulakis:
  Identification of regulatory mechanisms of the hepatic response to thermal injury. 356-369
  

Volume 32, Number 3, March 2008

• R. F. Alvani, M. Fairweather:
  Prediction of the ignition characteristics of flammable jets using intermittency-based turbulence models and a prescribed pdf approach. 371-381
  
• A. Chakraborty, D. Deglon:
  Development of a heuristic methodology for precise sensor network design. 382-395
  
• Mariano Asteasuain, Adriana Brandolin:
  Modeling and optimization of a high-pressure ethylene polymerization reactor using gPROMS. 396-408
  
• Mordechai Shacham, Neima Brauner:
  Preventing oscillatory behavior in error control for ODEs. 409-419
  
• I. T. Cameron, G. D. Ingram:
  A survey of industrial process modelling across the product and process lifecycle. 420-438
  
• Wen Zhou, Vasilios I. Manousiouthakis:
  On dimensionality of attainable region construction for isothermal reactor networks. 439-450
  
• Tao Chen, A. Julian Morris, Elaine B. Martin:
  Dynamic data rectification using particle filters. 451-462
  
• Adrian Prata, Jan Oldenburg, Andreas Kroll, Wolfgang Marquardt:
  Integrated scheduling and dynamic optimization of grade transitions for a continuous polymerization reactor. 463-476
  
• María Lorena Bergamini, Ignacio E. Grossmann, Nicolás J. Scenna, Pío A. Aguirre:
  An improved piecewise outer-approximation algorithm for the global optimization of MINLP models involving concave and bilinear terms. 477-493
  
• Derrick K. Rollins Sr., Gabrielle L. Larson:
  Estimating a minimum set of physically based dynamic parameters to enhance statistical inference in block-oriented modeling. 494-502
  
• Francisco J. Valdes-Parada, Mauricio Sales-Cruz, J. Alberto Ochoa-Tapia, Jose Alvarez-Ramirez:
  On Green's function methods to solve nonlinear reaction-diffusion systems. 503-511
  
• Andrej Mosat, Laurent Cavin, Ulrich Fischer, Konrad Hungerbühler:
  Multiobjective optimization of multipurpose batch plants using superequipment class concept. 512-529
  
• Abeer M. Shoaib, Said M. Aly, Moustafa E. Awad, Dominic C. Y. Foo, Mahmoud M. El-Halwagi:
  A hierarchical approach for the synthesis of batch water network. 530-539
  
• Thokozani Majozi, Anand Moodley:
  Simultaneous targeting and design for cooling water systems with multiple cooling water supplies. 540-551
  
• Michael Grimm, Sandip Mazumder:
  Numerical investigation of wall heat conduction effects on catalytic combustion in split and continuous monolith tubes. 552-560
  
• K. Mohanarangam, Z. F. Tian, J. Y. Tu:
  Numerical simulation of turbulent gas-particle flow in a 90degree bend: Eulerian-Eulerian approach. 561-571
  
• B. Srinivasan, Lorenz T. Biegler, Dominique Bonvin:
  Tracking the necessary conditions of optimality with changing set of active constraints using a barrier-penalty function. 572-579
  
• Mahsa Ghaeli, Parisa A. Bahri, Peter L. Lee:
  Scheduling of a mixed batch/continuous sugar milling plant using Petri nets. 580-589
  
• M. Fairweather, J.-P. Hurn:
  Validation of an anisotropic model of turbulent flows containing dispersed solid particles applied to gas-solid jets. 590-599
  
• Parvez Alam, Martti Toivakka:
  Micro-buckling of paper during blade metering. 600-607
  
• Xuefeng Yan:
  Modified nonlinear generalized ridge regression and its application to develop naphtha cut point soft sensor. 608-621
  
• Jean Lubilanji Mulopo, Diane Hildebrandt, David Glasser:
  Reactive column profile map topology: Continuous distillation column with non-reversible kinetics. 622-629
  

Volume 32, Numbers 4-5, April 2008

• Venkat Venkatasubramanian, Ignacio E. Grossmann, Rafiqul Gani:
  Preface - Reklaitis 65th birthday special issue. 631-632
  
• Eric Yang, Timothy Maguire, Martin L. Yarmush, Ioannis P. Androulakis:
  Informative gene selection and design of regulatory networks using integer optimization. 633-649
  
• Luis Puigjaner, Gonzalo Guillén:
  Towards an integrated framework for supply chain management in the batch chemical process industry. 650-670
  
• Yu Liu, I. A. Karimi:
  Scheduling multistage batch plants with parallel units and no interstage storage. 671-693
  
• Olaf Kahrs, Wolfgang Marquardt:
  Incremental identification of hybrid process models. 694-705
  
• John D. Hedengren, Thomas F. Edgar:
  Approximate nonlinear model predictive control with in situ adaptive tabulation. 706-714
  
• Zukui Li, Marianthi G. Ierapetritou:
  Process scheduling under uncertainty: Review and challenges. 715-727
  
• Diego C. Cafaro, Jaime Cerdá:
  Dynamic scheduling of multiproduct pipelines with multiple delivery due dates. 728-753
  
• Pinky Dua, Konstantinos I. Kouramas, Vivek Dua, Efstratios N. Pistikopoulos:
  MPC on a chip - Recent advances on the application of multi-parametric model-based control. 754-765
  
• Bora Tarhan, Ignacio E. Grossmann:
  A multistage stochastic programming approach with strategies for uncertainty reduction in the synthesis of process networks with uncertain yields. 766-788
  
• Mehmet Mercangöz, Francis J. Doyle III:
  Real-time optimization of the pulp mill benchmark problem. 789-804
  
• Sauro Pierucci, Eliseo Ranzi:
  A review of features in current automatic generation software for hydrocarbon oxidation mechanisms. 805-826
  
• Anjana Meel, Warren D. Seider:
  Real-time risk analysis of safety systems. 827-840
  
• K. Apostolou, Andy Hrymak:
  Discrete element simulation of liquid-particle flows. 841-856
  
• George Stephanopoulos, Orhan Karsligil, Matthew S. Dyer:
  Multiscale theory for linear dynamic processes: Part 1. Foundations. 857-884
  
• George Stephanopoulos, Orhan Karsligil, Matthew S. Dyer:
  Multiscale theory for linear dynamic processes: Part 2. Multiscale model predictive control (MS-MPC). 885-912
  
• Stacy L. Janak, Christodoulos A. Floudas:
  Improving unit-specific event based continuous-time approaches for batch processes: Integrality gap and task splitting. 913-955
  
• Sze W. Lin, Ka M. Ng, Christianto Wibowo:
  Synthesis of crystallization processes for systems involving solid solutions. 956-970
  
• Gary Blau, Michael Lasinski, Seza Orcun, Shuo-Huan Hsu, James M. Caruthers, W. Nicholas Delgass, Venkat Venkatasubramanian:
  High fidelity mathematical model building with experimental data: A Bayesian approach. 971-989
  
• Tore Lid, Sigurd Skogestad:
  Scaled steady state models for effective on-line applications. 990-999
  
• Vishal A. Varma, Joseph F. Pekny, Gary E. Blau, Gintaras V. Reklaitis:
  A framework for addressing stochastic and combinatorial aspects of scheduling and resource allocation in pharmaceutical R&D pipelines. 1000-1015
  
• Wei Xie, Nikolaos V. Sahinidis:
  A branch-and-bound algorithm for the continuous facility layout problem. 1016-1028
  
• Chonghun Han, Minjin Kim, En Sup Yoon:
  A hierarchical decision procedure for productivity innovation in large-scale petrochemical processes. 1029-1041
  
• R. Rejowski Jr., J. M. Pinto:
  A novel continuous time representation for the scheduling of pipeline systems with pumping yield rate constraints. 1042-1066
  
• Mani Bhushan, Sridharakumar Narasimhan, Raghunathan Rengaswamy:
  Robust sensor network design for fault diagnosis. 1067-1084
  

Volume 32, Number 6, June 2008

• Susana Relvas, Henrique A. Matos, M. Cristina Fernandes, Pedro M. Castro, Clemente Pedro Nunes:
  AquoMin: A software tool for Mass-Exchange Networks targeting and design. 1085-1105
  
• Pradeep Prasad, Christos T. Maravelias:
  Batch selection, assignment and sequencing in multi-stage multi-product processes. 1106-1119
  
• Françoise Couenne, Christian Jallut, Bernhard Maschke, Mélaz Tayakout-Fayolle, Peter C. Breedveld:
  Structured modeling for processes: A thermodynamical network theory. 1120-1134
  
• Adrian Verhoef, Jan Degrève, Bart Huybrechs, Henk M. van Veen, Paul Pex, Bart Van der Bruggen:
  Simulation of a hybrid pervaporation-distillation process. 1135-1146
  
• Tung-Hsiung Kuo, Chuei-Tin Chang:
  Optimal planning strategy for the supply chains of light aromatic compounds in petrochemical industries. 1147-1166
  
• Bao Lin, Claude F. Leibovici, Sten Bay Jørgensen:
  Optimal component lumping: Problem formulation and solution techniques. 1167-1172
  
• Raimund Bürger, Antonio García, Kenneth H. Karlsen, John D. Towers:
  A kinematic model of continuous separation and classification of polydisperse suspensions. 1173-1194
  
• Raúl Alves Santos, Julio E. Normey-Rico, Alejandro Merino Gómez, Luis Felipe Acebes Arconada, César de Prada Moraga:
  Distributed continuous process simulation: An industrial case study. 1195-1205
  
• A. Bonfill, Antonio Espuña Camarasa, Luis Puigjaner:
  Decision support framework for coordinated production and transport scheduling in SCM. 1206-1224
  
• Eleni Aggelogiannaki, Haralambos Sarimveis:
  Nonlinear model predictive control for distributed parameter systems using data driven artificial neural network models. 1225-1237
  
• F. Renard, A. Vande Wouwer:
  Robust adaptive control of yeast fed-batch cultures. 1238-1248
  
• Miguel Miura, Oleg Vinogradov:
  The effect of probability of coalescence on the evolution of bubble sizes in a turbulent pipeline flow: A numerical study. 1249-1256
  
• Miguel J. Bagajewicz, DuyQuang Nguyen:
  Stochastic-based accuracy of data reconciliation estimators for linear systems. 1257-1269
  
• B. Holenda, E. Domokos, Á. Rédey, J. Fazakas:
  Dissolved oxygen control of the activated sludge wastewater treatment process using model predictive control. 1270-1278
  
• Moritz Diehl, Johannes Gerhard, Wolfgang Marquardt, Martin Mönnigmann:
  Numerical solution approaches for robust nonlinear optimal control problems. 1279-1292
  
• Zeljko Cupic, Davor Loncarevic, Ana Ivanovic, Predrag Bankovic, Srdan Petrovic:
  Experimentally observable transitions between dynamical states in complex reaction systems. 1293-1304
  
• Katarzyna Bizon, Gaetano Continillo, Lucia Russo, Joanna Smula:
  On POD reduced models of tubular reactor with periodic regimes. 1305-1315
  
• J. Wang, Y. Chang, E. Q. Wang, C. Y. Li:
  Bifurcation analysis for MTBE synthesis in a suspension catalytic distillation column. 1316-1324
  
• Roland Kieffer, Catherine Charcosset, François Puel, Denis Mangin:
  Numerical simulation of mass transfer in a liquid-liquid membrane contactor for laminar flow conditions. 1325-1333
  
• Jocelyn Doucet, Nicolas Hudon, François Bertrand, Jamal Chaouki:
  Modeling of the mixing of monodisperse particles using a stationary DEM-based Markov process. 1334-1341
  
• Angelo Lucia, Amit Amale, Ross Taylor:
  Distillation pinch points and more. 1342-1364
  
• C. H. Marton, A. Elkamel, T. A. Duever:
  An order-specific clustering algorithm for the determination of representative demand curves. 1365-1372
  

Volume 32, Number 7, July 2008

• Jigar Patel, Korkut Uygun, Yinlun Huang:
  A path constrained method for integration of process design and control. 1373-1384
  
• Hou-Chieh Cheng, Feng-Sheng Wang:
  Optimal biocompatible solvent design for a two-stage extractive fermentation process with cell recycling. 1385-1396
  
• Olaf Kahrs, Neima Brauner, Georgi St. Cholakov, Roumiana P. Stateva, Wolfgang Marquardt, Mordechai Shacham:
  Analysis and refinement of the targeted QSPR method. 1397-1410
  
• Frank Henrich, Claude Bouvy, Christoph Kausch, Klaus Lucas, Mike Preuß, Günter Rudolph, Peter Roosen:
  Economic optimization of non-sharp separation sequences by means of evolutionary algorithms. 1411-1432
  
• A. Zamaniyan, A. T. Zoghi, H. Ebrahimi:
  Software development for design and simulation of terraced wall and top fired primary steam reformers. 1433-1446
  
• Behrang Mansoornejad, Navid Mostoufi, Farhang Jalali-Farahani:
  A hybrid GA-SQP optimization technique for determination of kinetic parameters of hydrogenation reactions. 1447-1455
  
• Devrim B. Kaymak, William L. Luyben:
  Quantitative comparison of dynamic controllability between a reactive distillation column and a conventional multi-unit process. 1456-1470
  
• Arash Sarhangi Fard, Navid M. Famili, Patrick D. Anderson:
  A new adaptation of mapping method to study mixing of multiphase flows in mixers with complex geometries. 1471-1481
  
• Ankan Kumar, Sandip Mazumder:
  Assessment of various diffusion models for the prediction of heterogeneous combustion in monolith tubes. 1482-1493
  
• Ville Alopaeus, Helena Laavi, Juhani Aittamaa:
  A dynamic model for plug flow reactor state profiles. 1494-1506
  
• Ruoyu Cheng, J. Fraser Forbes, W. San Yip:
  Dantzig-Wolfe decomposition and plant-wide MPC coordination. 1507-1522
  
• Hongping Zhang, Jie Ouyang, Ling Zhang, Supei Zheng:
  Multi-scale mathematic modeling of non-isothermal polymeric flow of fiber suspensions. 1523-1532
  
• R. K. Al Seyab, Yi Cao:
  Differential recurrent neural network based predictive control. 1533-1545
  
• Gongxian Xu, Cheng Shao, Zhilong Xiu:
  A modified iterative IOM approach for optimization of biochemical systems. 1546-1568
  
• Chanin Panjapornpon, Masoud Soroush, Warren D. Seider:
  Differential-geometric model-based control (DGMBC): A software package for controller design. 1569-1588
  
• Vasilios Papandreou, Zhigang Shang:
  A multi-criteria optimisation approach for the design of sustainable utility systems. 1589-1602
  
• Zorka Novak Pintaric, Zdravko Kravanja:
  Identification of critical points for the design and synthesis of flexible processes. 1603-1624
  
• Ilie Fishtik, Ravindra Datta:
  Systematic generation of thermochemical cycles for water splitting. 1625-1634
  
• Marian Simo, Christopher J. Brown, Vladimir Hlavacek:
  Simulation of pressure swing adsorption in fuel ethanol production process. 1635-1649
  
• Sai Kamarajugadda, Sandip Mazumder:
  On the implementation of membrane models in computational fluid dynamics calculations of polymer electrolyte membrane fuel cells. 1650-1660
  
• N. Zeoli, S. Gu, S. Kamnis:
  Numerical simulation of in-flight particle oxidation during thermal spraying. 1661-1668
  

Volume 32, Number 8, August 2008

• Chuanhu Ge, Guizeng Wang, Hao Ye:
  Analysis of the smallest detectable leakage flow rate of negative pressure wave-based leak detection systems for liquid pipelines. 1669-1680
  
• S. M. Mousavi, A. Jafari, S. Yaghmaei, M. Vossoughi, Ilkka Turunen:
  Experiments and CFD simulation of ferrous biooxidation in a bubble column bioreactor. 1681-1688
  
• A. Bonfill, Antonio Espuña Camarasa, Luis Puigjaner:
  Proactive approach to address the uncertainty in short-term scheduling. 1689-1706
  
• Hannes Link, Julio Vera, Dirk Weuster-Botz, Néstor Torres Darias, Ezequiel Franco-Lara:
  Multi-objective steady state optimization of biochemical reaction networks using a constrained genetic algorithm. 1707-1713
  
• Youdong Lin, Joshua A. Enszer, Mark A. Stadtherr:
  Enclosing all solutions of two-point boundary value problems for ODEs. 1714-1725
  
• F. Pettersson:
  Heat exchanger network design using geometric mean temperature difference. 1726-1734
  
• Julián Martínez, J. M. Martínez:
  Fitting the Sovová's supercritical fluid extraction model by means of a global optimization tool. 1735-1745
  
• A. Afshar Ebrahimi, H. Ale Ebrahim, E. Jamshidi:
  Solving partial differential equations of gas-solid reactions by orthogonal collocation. 1746-1759
  
• Z. Y. Zhou, H. P. Zhu, A. B. Yu, B. Wright, P. Zulli:
  Discrete particle simulation of gas-solid flow in a blast furnace. 1760-1772
  
• M. Ramasamy, S. Sundaramoorthy:
  PID controller tuning for desired closed-loop responses for SISO systems using impulse response. 1773-1788
  
• Jürgen Koch, Wolfgang Hackbusch, Kai Sundmacher:
  H-matrix methods for quadratic integral operators appearing in population balances. 1789-1809
  
• Jitendra Kumar, Mirko Peglow, Gerald Warnecke, Stefan Heinrich:
  The cell average technique for solving multi-dimensional aggregation population balance equations. 1810-1830
  
• C. Devals, Mourad Heniche, K. Takenaka, Philippe A. Tanguy:
  CFD analysis of several design parameters affecting the performance of the Maxblend impeller. 1831-1841
  
• Yoshikazu Ishii, Fred D. Otto:
  Novel and fundamental strategies for equation-oriented process flowsheeting: Part I: A basic algorithm for inter-linked, multicolumn separation processes. 1842-1860
  
• Krishna M. Yerramsetty, C. V. S. Murty:
  Synthesis of cost-optimal heat exchanger networks using differential evolution. 1861-1876
  
• Oliver Exler, Luis T. Antelo, Jose A. Egea, Antonio A. Alonso, Julio R. Banga:
  A Tabu search-based algorithm for mixed-integer nonlinear problems and its application to integrated process and control system design. 1877-1891
  
• Xiao Feng, Jie Bai, Huimin Wang, Xuesong Zheng:
  Grass-roots design of regeneration recycling water networks. 1892-1907
  
• Xiao-Hong Wang, Yu-Gang Li, Yang-Dong Hu, Ying-Long Wang:
  Synthesis of heat-integrated complex distillation systems via Genetic Programming. 1908-1917
  
• José María Ponce-Ortega, Arturo Jiménez-Gutiérrez, Ignacio E. Grossmann:
  Optimal synthesis of heat exchanger networks involving isothermal process streams. 1918-1942
  
• Fouzi Kerdouss, A. Bannari, Pierre Proulx, Rachid Bannari, M. Skrga, Y. Labrecque:
  Two-phase mass transfer coefficient prediction in stirred vessel with a CFD model. 1943-1955
  
• Yisu Jin, Xiaofang Peng, Yizeng Liang, Jinyu Ma:
  Uniform design-based sensitivity analysis of circadian rhythm model in Neurospora. 1956-1962
  

Volume 32, Number 9, September 2008

• Nael H. El-Farra, Prashant Mhaskar:
  Special issue on "Control of networked and complex process systems". 1963
  
• Michael Baldea, Prodromos Daoutidis:
  Modeling, dynamics and control of process networks with high energy throughput. 1964-1983
  
• M. Derya Tetiker, Arsun Artel, Fouad Teymour, Ali Cinar:
  Control of grade transitions in distributed chemical reactor networks - An agent-based approach. 1984-1994
  
• Luis T. Antelo, Julio R. Banga, Antonio A. Alonso:
  Hierarchical design of decentralized control structures for the Tennessee Eastman Process. 1995-2015
  
• Yulei Sun, Nael H. El-Farra:
  Quasi-decentralized model-based networked control of process systems. 2016-2029
  
• Prakash R. Kotecha, Mani Bhushan, Ravindra D. Gudi:
  Design of robust, reliable sensor networks using constraint programming. 2030-2049
  
• Nandan U. Ukidwe, Bhavik R. Bakshi:
  Resource intensities of chemical industry sectors in the United States via input-output network models. 2050-2064
  
• Francisco G. Vital-Lopez, Amit Varshney, Costas D. Maranas, Antonios Armaou:
  Implication of dynamics in signal transduction and targeted disruption analyses of signaling networks. 2065-2071
  
• Laurence Yang, Radhakrishnan Mahadevan, William R. Cluett:
  A bilevel optimization algorithm to identify enzymatic capacity constraints in metabolic networks. 2072-2085
  
• Stevan Dubljevic, Shien-Fong Lin, Panagiotis D. Christofides:
  Studies on feedback control of cardiac alternans. 2086-2098
  
• Thomas A. Adams II, Warren D. Seider:
  Practical optimization of complex chemical processes with tight constraints. 2099-2112
  
• Rahul Gandhi, Prashant Mhaskar:
  Safe-parking of nonlinear process systems. 2113-2122
  
• Mingheng Li, Panagiotis D. Christofides:
  Optimal control of diffusion-convection-reaction processes using reduced-order models. 2123-2135
  
• Amit Varshney, Antonios Armaou:
  Reduced order modeling and dynamic optimization of multiscale PDE/kMC process systems. 2136-2143
  
• Fangwei Xu, Biao Huang, Edgar C. Tamayo:
  Performance assessment of MIMO control systems with time-variant disturbance dynamics. 2144-2154
  
• Masoud Soroush, Michael C. Grady, George A. Kalfas:
  Free-radical polymerization at higher temperatures: Systems impacts of secondary reactions. 2155-2167
  

Volume 32, Number 10, October 2008

• Ervina Widjaja, Michael T. Harris:
  Numerical study of vapor phase-diffusion driven sessile drop evaporation. 2169-2178
  
• Olivier Wailly, Nicolas Héraud, Olaf Malasse:
  Design of instrumentation in process plants using Groëbner bases. 2179-2188
  
• K. Al-Qahtani, A. Elkamel:
  Multisite facility network integration design and coordination: An application to the refining industry. 2189-2202
  
• R. Bhargava, S. Khanam, B. Mohanty, A. K. Ray:
  Selection of optimal feed flow sequence for a multiple effect evaporator system. 2203-2216
  
• Dominic C. Y. Foo, Mike B. L. Ooi, Raymond R. Tan, Jenny S. Tan:
  A heuristic-based algebraic targeting technique for aggregate planning in supply chains. 2217-2232
  
• Jeffrey D. Ward, Cheng-Ching Yu:
  Population balance modeling in Simulink: PCSS. 2233-2242
  
• Amit M. Katariya, Ravindra S. Kamath, Kannan M. Moudgalya, Sanjay M. Mahajani:
  Non-equilibrium stage modeling and non-linear dynamic effects in the synthesis of TAME by reactive distillation. 2243-2255
  
• Subbarao Varigonda, Tryphon T. Georgiou, Ronald A. Siegel, Prodromos Daoutidis:
  Optimal periodic control of a drug delivery system. 2256-2262
  
• H. Kruggel-Emden, M. Sturm, S. Wirtz, V. Scherer:
  Selection of an appropriate time integration scheme for the discrete element method (DEM). 2263-2279
  
• Weiping Yang, Jian Zhang:
  Simulation of swirling turbulent combustion in the TECFLAM combustor. 2280-2289
  
• Aidong Yang, Bertrand Braunschweig, Eric S. Fraga, Zahia Guessoum, Wolfgang Marquardt, O. Nadjemi, D. Paen, D. Piñol, P. Roux, S. Sama, M. Serra, I. Stalker:
  A multi-agent system to facilitate component-based process modeling and design. 2290-2305
  
• Yi Cao, Vinay Kariwala:
  Bidirectional branch and bound for controlled variable selection: Part I. Principles and minimum singular value criterion. 2306-2319
  
• José María Ponce-Ortega, Medardo Serna-González, Arturo Jiménez-Gutiérrez:
  Synthesis of multipass heat exchanger networks using genetic algorithms. 2320-2332
  
• Farhang Jalali, J. D. Seader, Saeed Khaleghi:
  Global solution approaches in equilibrium and stability analysis using homotopy continuation in the complex domain. 2333-2345
  
• Jan Oldenburg, Wolfgang Marquardt:
  Disjunctive modeling for optimal control of hybrid systems. 2346-2364
  
• A. Chaisantikulwat, C. Diaz-Goano, E. S. Meadows:
  Dynamic modelling and control of planar anode-supported solid oxide fuel cell. 2365-2381
  
• J. Navarro-Laboulais, S. C. Cardona, J. I. Torregrosa, A. Abad, F. López:
  Practical identifiability analysis in dynamic gas-liquid reactors: Optimal experimental design for mass-transfer parameters determination. 2382-2394
  
• Mario E. Mellado, Luis A. Cisternas:
  An analytical-numerical method for solving a heap leaching problem of one or more solid reactants from porous pellets. 2395-2402
  
• Tonghua Zhang, Moses O. Tadé, Yu-Chu Tian, Hong Zang:
  High-resolution method for numerically solving PDEs in process engineering. 2403-2408
  
• Mohamed Soliman, Christopher L. E. Swartz, Rhoda Baker:
  A mixed-integer formulation for back-off under constrained predictive control. 2409-2419
  
• Rafiqul Gani, Paola Arenas Gómez, Milica Folic, Concepción Jiménez-González, David J. C. Constable:
  Solvents in organic synthesis: Replacement and multi-step reaction systems. 2420-2444
  
• Thomas R. Boehme, Christopher H. Onder, Lino Guzzella:
  Code-generator-based software package for defining and solving one-dimensional, dynamic, catalytic reactor models. 2445-2454
  
• Shuo-Huan Hsu, Balachandra Krishnamurthy, Prathima Rao, Chunhua Zhao, Suresh Jagannathan, Venkat Venkatasubramanian:
  A domain-specific compiler theory based framework for automated reaction network generation. 2455-2470
  
• Hakan Moral, Aysegul Aksoy, Celal F. Gokcay:
  Modeling of the activated sludge process by using artificial neural networks with automated architecture screening. 2471-2478
  

Volume 32, Number 11, November 2008

• Ignacio E. Grossmann, Kevin C. Furman:
  Foreword. 2479-2480
  
• Jeff Ferrio, John M. Wassick:
  Chemical supply chain network optimization. 2481-2504
  
• Peter Chen, Jose M. Pinto:
  Lagrangean-based techniques for the supply chain management of flexible process networks. 2505-2528
  
• Young Kim, Choamun Yun, Seung Bin Park, Sunwon Park, L. T. Fan:
  An integrated model of supply network and production planning for multiple fuel products of multi-site refineries. 2529-2535
  
• Wasu Glankwamdee, Jeff T. Linderoth, Jierui Shen, Peter Connard, Jim Hutton:
  Combining optimization and simulation for strategic and operational industrial gas production and distribution. 2536-2546
  
• Rodolfo Dondo, Carlos A. Méndez, Jaime Cerdá:
  Optimal management of logistic activities in multi-site environments. 2547-2569
  
• June Young Jung, Gary Blau, Joseph F. Pekny, Gintaras V. Reklaitis, David Eversdyk:
  Integrated safety stock management for multi-stage supply chains under production capacity constraints. 2570-2581
  
• Luis Puigjaner, José Miguel Laínez:
  Capturing dynamics in integrated supply chain management. 2582-2605
  
• A. C. S. Amaro, Ana Paula F. D. Barbosa-Póvoa:
  Planning and scheduling of industrial supply chains with reverse flows: A real pharmaceutical case study. 2606-2625
  
• Matthew Colvin, Christos T. Maravelias:
  A stochastic programming approach for clinical trial planning in new drug development. 2626-2642
  
• Rui Sousa, Nilay Shah, Lazaros G. Papageorgiou:
  Supply chain design and multilevel planning - An industrial case. 2643-2663
  
• Muge Erdirik-Dogan, Ignacio E. Grossmann:
  Simultaneous planning and scheduling of single-stage multi-product continuous plants with parallel lines. 2664-2683
  
• Jeffrey D. Kelly, Danielle Zyngier:
  Hierarchical decomposition heuristic for scheduling: Coordinated reasoning for decentralized and distributed decision-making problems. 2684-2705
  
• Guido Sand, Jochen Till, Thomas Tometzki, Maren Urselmann, Sebastian Engell, Michael Emmerich:
  Engineered versus standard evolutionary algorithms: A case study in batch scheduling with recourse. 2706-2722
  
• Yves Pochet, François Warichet:
  A tighter continuous time formulation for the cyclic scheduling of a mixed plant. 2723-2744
  
• Ramkumar Karuppiah, Kevin C. Furman, Ignacio E. Grossmann:
  Global optimization for scheduling refinery crude oil operations. 2745-2766
  
• Suresh S. Pitty, Wenkai Li, Arief Adhitya, Rajagopalan Srinivasan, Iftekhar A. Karimi:
  Decision support for integrated refinery supply chains: Part 1. Dynamic simulation. 2767-2786
  
• Lee Ying Koo, Arief Adhitya, Rajagopalan Srinivasan, Iftekhar A. Karimi:
  Decision support for integrated refinery supply chains: Part 2. Design and operation. 2787-2800
  
• Xiaodan Gao, Bingzhen Chen, Xiaorong He, Tong Qiu, Jichun Li, Chongming Wang, Longjiang Zhang:
  Multi-objective optimization for the periodic operation of the naphtha pyrolysis process using a new parallel hybrid algorithm combining NSGA-II with SQP. 2801-2811
  
• María Analía Rodríguez, Aldo R. Vecchietti:
  Enterprise optimization for solving an assignment and trim-loss non-convex problem. 2812-2822
  
• Antonio Flores-Tlacuahuac, Lorenz T. Biegler:
  Integrated control and process design during optimal polymer grade transition operations. 2823-2837
  

Volume 32, Number 12, December 2008

• J. R. Rodriguez Vasquez, R. Rivas Perez, J. Sotomayor Moriano, J. R. Peran Gonzalez:
  System identification of steam pressure in a fire-tube boiler. 2839-2848
  
• Wenhao Shen, Xiaoquan Chen, Jean Pierre Corriou:
  Application of model predictive control to the BSM1 benchmark of wastewater treatment process. 2849-2856
  
• Kevin C. Furman, Ioannis P. Androulakis:
  A novel MINLP-based representation of the original complex model for predicting gasoline emissions. 2857-2876
  
• Chamakuri Nagaiah, Gerald Warnecke, Stefan Heinrich, Mirko Peglow:
  Three-dimensional numerical study of heat and mass transfer in fluidized beds with spray nozzle. 2877-2890
  
• Mitja Lakner, Igor Plazl:
  The finite differences method for solving systems on irregular shapes. 2891-2896
  
• Attasak Jaree, Boonlerd Boonsomlanjit, Jumras Limtrakul:
  On the dynamical instability of packed-bed reactors in the presence of catalyst deactivation. 2897-2902
  
• B. T. Baumrucker, J. G. Renfro, Lorenz T. Biegler:
  MPEC problem formulations and solution strategies with chemical engineering applications. 2903-2913
  
• Johannes Gerhard, Martin Mönnigmann, Wolfgang Marquardt:
  Steady state optimization with guaranteed stability of a tryptophan biosynthesis model. 2914-2919
  
• Antonio Araújo, Sigurd Skogestad:
  Control structure design for the ammonia synthesis process. 2920-2932
  
• L. F. L. R. Silva, R. B. Damian, P. L. C. Lage:
  Implementation and analysis of numerical solution of the population balance equation in CFD packages. 2933-2945
  
• Christian Drumm, Sudarshan Tiwari, Jörg Kuhnert, Hans-Jörg Bart:
  Finite pointset method for simulation of the liquid-liquid flow field in an extractor. 2946-2957
  
• Michael J. Martínez, Sirivatch Shimpalee, J. W. Van Zee:
  Comparing predictions of PEM fuel cell behavior using Maxwell-Stefan and CFD approximation equations. 2958-2965
  
• Markus Kettunen, Ping Zhang, Sirkka-Liisa Jämsä Jounela:
  An embedded fault detection, isolation and accommodation system in a model predictive controller for an industrial benchmark process. 2966-2985
  
• Mosé Galluzzo, Bartolomeo Cosenza, Aditya Matharu:
  Control of a nonlinear continuous bioreactor with bifurcation by a type-2 fuzzy logic controller. 2986-2993
  
• Nicolas Hudon, Martin Guay, Michel Perrier, Denis Dochain:
  Adaptive extremum-seeking control of convection-reaction distributed reactor with limited actuation. 2994-3001
  
• Fadwa T. Eljack, Mario R. Eden:
  A systematic visual approach to molecular design via property clusters and group contribution methods. 3002-3010
  
• M. S. Varziri, A. A. Poyton, K. B. McAuley, P. J. McLellan, J. O. Ramsay:
  Selecting optimal weighting factors in iPDA for parameter estimation in continuous-time dynamic models. 3011-3022
  
• J. X. Lin, C. Y. Wang, Y. Y. Zheng:
  Prediction of isothermal crystallization parameters in monomer cast nylon 6. 3023-3029
  
• San-Jang Wang, David S. H. Wong, Shuh-Woei Yu:
  Design and control of transesterification reactive distillation with thermal coupling. 3030-3037
  
• Tao Liu, Furong Gao:
  Identification of integrating and unstable processes from relay feedback. 3038-3056
  
• Victoria E. Tamayo-Galván, Juan Gabriel Segovia-Hernández, Salvador Hernández, Julián Cabrera-Ruiz, J. Rafael Alcántara-Ávila:
  Controllability analysis of alternate schemes to complex column arrangements with thermal coupling for the separation of ternary mixtures. 3057-3066
  
• Yaohua He, Chi-Wai Hui:
  A rule-based genetic algorithm for the scheduling of single-stage multi-product batch plants with parallel units. 3067-3083
  
• P. Azadi, R. Farnood, N. Yan:
  Modeling the effect of pigment morphology on the dynamic compression of coating layers using DEM. 3084-3089
  
• Fengqi You, Ignacio E. Grossmann:
  Design of responsive supply chains under demand uncertainty. 3090-3111
  
• S. Hocine, Luc Pibouleau, Catherine Azzaro-Pantel, Serge Domenech:
  Modelling systems defined by RTD curves. 3112-3120
  
• Jonas Sjöblom, Derek Creaser:
  Latent variable projections of sensitivity data for experimental screening and kinetic modeling. 3121-3129
  
• Milos Bogataj, Miguel J. Bagajewicz:
  Synthesis of non-isothermal heat integrated water networks in chemical processes. 3130-3142
  
• A. Akbari, M. R. Omidkhah, M. R. Hojjati:
  Heat exchanger network area targeting considering stream allocation to shell or tubes. 3143-3152
  
• Pavan Kumar Naraharisetti, I. A. Karimi, Rajagopalan Srinivasan:
  Supply chain redesign through optimal asset management and capital budgeting. 3153-3169
  
• Miguel Vaca, Rosendo Monroy-Loperena, Arturo Jiménez-Gutiérrez:
  An implementation variant of the polynomial finite difference method with orthogonal collocation and adjustable element length. 3170-3175
  
• Carla Martin-Villalba, Alfonso Urquia, Sebastián Dormido:
  Object-oriented modelling of virtual-labs for education in chemical process control. 3176-3186
  
• K. Mohanarangam, J. Y. Tu, L. Chen:
  Numerical study of particle dispersion behind a sudden expansion geometry and its effect on step heights. 3187-3197
  
• Gabriele Milani, Federico Milani:
  Genetic algorithm for the optimization of rubber insulated high voltage power cables production lines. 3198-3212
  
• R. Bhargava, S. Khanam, B. Mohanty, A. K. Ray:
  Simulation of flat falling film evaporator system for concentration of black liquor. 3213-3223
  
• Rachid Bannari, Fouzi Kerdouss, Brahim Selma, Abdelfettah Bannari, Pierre Proulx:
  Three-dimensional mathematical modeling of dispersed two-phase flow using class method of population balance in bubble columns. 3224-3237
  
• Pooya Azadi, Ning Yan, Ramin Farnood:
  Discrete element modeling of the transient heat transfer and toner fusing process in the Xerographic printing of coated papers. 3238-3245
  
• J. P. García-Sandoval, V. González-Álvarez, Bernardino Castillo-Toledo, C. Pelayo-Ortiz:
  Robust discrete control of nonlinear processes: Application to chemical reactors. 3246-3253
  
• Javier Causa, Gorazd Karer, Alfredo Núñez, Doris Sáez, Igor Skrjanc, Borut Zupancic:
  Hybrid fuzzy predictive control based on genetic algorithms for the temperature control of a batch reactor. 3254-3263
  
• Fernando di Sciascio, Adriana N. Amicarelli:
  Biomass estimation in batch biotechnological processes by Bayesian Gaussian process regression. 3264-3273
  

Last update Thu May 23 18:23:25 2013 CET by the DBLP Team — Data released under the ODC-BY 1.0 license — See also our legal information page